Use Length to Solve a Narrow Pocket
The 48mm length and 16mm width can help teams compare linear battery placement where a square or wide pouch would interfere with the board or housing.
3.7 V Lithium Polymer Battery
3.7 V 460mAh Lithium Polymer Battery 651648
The 651648 460mAh LiPo battery uses a 6.5mm × 16mm × 48mm long-format envelope for OEM products with more available length than width. Its approximately 1.70Wh calculated energy gives a starting point for comparing linear placement, runtime and connector access.
651648 LiPo Battery Reference6.5mm × 16mm × 48mm Format
3.7 V · ≈1.70WhProduct Snapshot
A 48mm Battery Length for Distributed Placement
The 651648 format places a 460mAh rated capacity in a 6.5mm-thick, 16mm × 48mm pouch. The long narrow geometry makes it a useful reference for products where the battery follows an enclosure wall, board edge or internal rail.
Keep a Moderate Capacity in View
The 460mAh rating and approximately 1.70Wh calculated energy support early runtime comparison without moving immediately to a much larger battery footprint.
460mAhRated Capacity
1.70WhCalculated Energy
6.5mmCell Thickness
16mm × 48mmPlan Area
Technical Data
651648 LiPo Battery Specifications
The table separates confirmed configuration data from calculated electrical references so the 651648 format can be reviewed quickly during product planning.
| Mechanical and Electrical Specifications | |
|---|---|
| Product Number | 651648 |
| Nominal Voltage | 3.7 V |
| Rated Capacity | 460mAh |
| Battery Dimension | 6.5mm × 16mm × 48mm |
| Approximate Battery Weight | Approx. 9.2g |
| Calculated Electrical References | |
| Standard Charge Current | Approx. 230mA |
| Rapid Charge Current | Approx. 460mA |
| Standard Discharge Current | Approx. 92mA |
| Maximum Discharge Current | Approx. 460mA |
| Calculated Energy | Approx. 1.70Wh |
Approximate weight follows the 3.7 V LiPo family reference. Current and energy values are calculated planning references, not measured limits; confirm the final charger, protection and load specification for the finished battery.
Product Characteristics & Advantages
A Long Narrow 460mAh Format for Linear Battery Pockets: Why Evaluate the 651648 LiPo Battery?
The 651648 page is built around linear integration. Its length-to-width ratio is the primary differentiator, while the 6.5mm profile, 460mAh capacity and calculated energy help the team evaluate the entire battery path inside the device.
The calculated electrical references provide a structured starting point for charger, load and protection discussions. Share the finished product requirements with ZERNE to confirm the final battery design and assembly details.
48mm for a Linear Battery Channel
The length can follow a housing edge, handle, rail or board boundary when the product has limited width but enough longitudinal space.
16mm for Space Beside Electronics
The 16mm width provides a concrete starting boundary for devices where a wider pouch would compete with boards or mechanical features.
A Defined Depth for Stack-Up Review
Check the cell thickness with cushioning, retention, cable exit and nearby components before finalizing the enclosure.
Approximately 1.70Wh for Runtime Planning
The capacity can be compared with reporting intervals, sensing cycles, display time and the service interval of the finished product.
Plan the Cable Route Along the Long Side
A linear format benefits from early connector and lead-exit planning so the final assembly does not lose the intended pocket length.
Battery Calculation
Check 651648 Energy and Estimated Runtime
Use the prefilled 651648 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Approx. 230mA is the approximate standard-charge reference for 460mAh.
1.70WhEstimated Energy
—Estimated Runtime
—Ideal Charge Time
How to Use the Result
The 651648 reference values are prefilled: 3.7 V, 460mAh and a standard-charge reference of approximately 230mA. Adjust the load power and efficiency to compare operating scenarios; the calculator does not infer safe limits from capacity alone.
- Energy = voltage × capacity ÷ 1000
- Runtime estimate = energy × efficiency ÷ load power
- Ideal charge time = capacity ÷ entered charge current
- Actual runtime depends on load profile, temperature, cutoff and system losses
Use the result for early comparison, then confirm the charger, protection, connector and final battery specification through sample testing.
Integration Guidance
Route the 651648 Battery Along a Long, Narrow Pocket
The 651648 selection depends on whether the product can reserve 48mm of length while keeping width close to 16mm. Review the 6.5mm depth, retention features and cable route along the full battery channel.
Reserve the 16mm Width
Check the narrow side against boards, ribs, screws and the enclosure wall so the pouch is not forced into a smaller space.
Use the 48mm Length Deliberately
Align the long side with the available channel and plan retention points without blocking the lead exit or service path.
Compare 1.70Wh with the Duty Cycle
Use calculated energy for early budgeting, then validate runtime with the actual load, cut-off and system efficiency.
Protect the Complete Linear Assembly
Review cushioning, edge support, cable bend radius, connector access and the final protection arrangement before sampling.
The stated dimensions and calculated values are reference inputs for design planning. Confirm the finished battery drawing, tolerance, protection, connector and test conditions before production release.
Applications & Solutions
Applications for the 651648 460mAh LiPo Battery
The 651648 460mAh format can be evaluated in compact products with a long internal channel, limited width and a defined need for moderate rechargeable energy.
01Linear GPS and Tracking Devices
The 48mm length can be compared with tracker housings that place the battery along an enclosure edge while the 460mAh capacity supports periodic reporting.
View GPS Tracker Solutions →
02Handheld Instruments and Controls
The narrow 16mm width can help teams examine battery placement along a handle, side rail or long internal cavity in a portable instrument.
View Handheld Device Solutions →
03Portable Medical Equipment
The long pouch can be reviewed in selected medical devices where the enclosure offers a linear battery channel and the runtime target is moderate.
View Medical Battery Solutions →These application paths are starting points for OEM evaluation. Final suitability depends on actual load, runtime, temperature, protection, connector and assembly requirements.
Related Technical Articles
Guidance for 651648 Battery Selection
These resources support the 651648 selection around linear packaging, current demand and safe LiPo integration.
Energy and GeometryWhat Is Energy Density in a Lithium Polymer Battery?
Compare the 1.70Wh reference with the long narrow battery envelope and the available device volume.
Read the energy and geometry guide →
Current DemandWhat Is the C Rating of a LiPo Battery and Why It Matters
Review load peaks and charger selection before approving the 460mAh linear format.
Read the current demand guide →
Operating ConditionsHow Temperature Affects the Performance of a LiPo Battery
Consider how the final installation environment can affect available capacity, charging and the operating window.
Read the operating conditions guide →OEM Battery Support
Start the 651648 Inquiry with the Battery Channel
Share the available 16mm width, 48mm length, 6.5mm depth, target runtime and connector path so ZERNE can assess the long narrow 460mAh format.
Useful RFQ Inputs
The 651648 decision depends on the complete linear pocket and how the battery connects to the board.
- 16mm width and 48mm length
- 6.5mm depth and assembly clearance
- 460mAh runtime target
- Load, charger and protection conditions
- Lead exit, connector and retention
- Quantity, samples and approval timing
When a Shorter Format Is Better
ZERNE can compare 502236, 603030, 323540 or a custom geometry when a 48mm battery channel is not available.
Discuss a Custom BatteryFAQ
651648 LiPo Battery Questions
Find answers about the 651648 460mAh lithium polymer battery, including its long narrow dimensions, calculated energy and connection planning.
What are the dimensions of the 651648 battery?
The 651648 reference measures 6.5mm in thickness, 16mm in width and 48mm in length.
How much energy does the 651648 battery provide?
At 3.7 V nominal voltage, the rated 460mAh capacity gives approximately 1.70Wh of calculated energy before device cut-off and system losses.
What is the main advantage of the 651648 format?
Its 16mm × 48mm plan area provides a long narrow reference for products that have more available length than width for the battery pocket.
What should be confirmed before electrical approval?
Confirm the charger, protection arrangement, device load, cut-off condition and final electrical limits for the completed long-format battery assembly.
What should be checked around the long battery pocket?
Review the full 48mm channel, 16mm width, 6.5mm depth, edge retention, lead exit, connector bend radius and protection arrangement.
Can ZERNE customize the 651648 battery?
Yes. ZERNE can discuss alternate capacity, dimensions, connector, cable, protection and assembly requirements for the target product.
Technical Inquiry
Review the 651648 Long Battery Pocket with ZERNE
Share the available 16mm × 48mm pocket, 6.5mm depth, operating interval, load profile and connector requirements so ZERNE can assess the 651648 460mAh format.
- 16mm × 48mm battery channel and 6.5mm depth
- 460mAh energy target and runtime
- Load, charger and protection conditions
- Connector, samples and production plan