A Compact Square Footprint
The 30mm × 30mm area can be considered when the battery pocket sits near the center of a device rather than along a long internal channel.
3.7 V Lithium Polymer Battery
3.7 V 450mAh Lithium Polymer Battery 603030
The 603030 450mAh LiPo battery places a moderate energy target in a 6.0mm × 30mm × 30mm compact square format. It can help OEM teams compare a wider, centered battery pocket with long or thin alternatives before the enclosure and connection path are finalized.
603030 LiPo Battery Reference6.0mm × 30mm × 30mm Format
3.7 V · ≈1.67WhProduct Snapshot
A Square-Leaning 450mAh Battery Pocket
The 603030 reference combines 450mAh capacity with a 6mm profile and a 30mm × 30mm plan area. Its near-square footprint gives the mechanical team a different option from the 3.2mm-thin 323540 and the long 651648 format.
Moderate Capacity in a 6mm Profile
The 450mAh rating and approximately 1.67Wh calculated energy provide a defined reference for portable electronics, sensors and compact instruments.
450mAhRated Capacity
1.67WhCalculated Energy
6.0mmCell Thickness
30mm × 30mmPlan Area
Technical Data
603030 LiPo Battery Specifications
The table separates confirmed configuration data from calculated electrical references so the 603030 format can be reviewed quickly during product planning.
| Mechanical and Electrical Specifications | |
|---|---|
| Product Number | 603030 |
| Nominal Voltage | 3.7 V |
| Rated Capacity | 450mAh |
| Battery Dimension | 6.0mm × 30mm × 30mm |
| Approximate Battery Weight | Approx. 9g |
| Calculated Electrical References | |
| Standard Charge Current | Approx. 225mA |
| Rapid Charge Current | Approx. 450mA |
| Standard Discharge Current | Approx. 90mA |
| Maximum Discharge Current | Approx. 450mA |
| Calculated Energy | Approx. 1.67Wh |
Approximate weight follows the 3.7 V LiPo family reference. Current and energy values are calculated planning references, not measured limits; confirm the final charger, protection and load specification for the finished battery.
Product Characteristics & Advantages
A Square 450mAh Format for Compact Device Layouts: Why Evaluate the 603030 LiPo Battery?
The 603030 page owns the square compact geometry in the 450mAh group. Its selection logic is different from 323540, which prioritizes thinness, and 651648, which prioritizes a long narrow pocket.
The calculated electrical references provide a structured starting point for charger, load and protection discussions. Share the finished product requirements with ZERNE to confirm the final battery design and assembly details.
30mm × 30mm for Centered Placement
The near-square plan area can simplify comparison with housings that have a broad central cavity or a board-surrounded battery space.
A Clear Enclosure Boundary
Use the 6mm thickness to review cushioning, compression, retention and the position of adjacent components.
A Moderate Energy Reference
The calculated 1.67Wh can support early runtime comparisons for devices with intermittent loads and compact service intervals.
Capacity-Based Current Planning
Approximate current references are calculated from the current rated capacity and are intended to start charger and load discussions.
A Starting Point for a Tailored Square Cell
ZERNE can review connector, cable, protection, capacity and mechanical changes when the 603030 pocket needs adjustment.
Battery Calculation
Check 603030 Energy and Estimated Runtime
Use the prefilled 603030 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Approx. 225mA is the approximate standard-charge reference for 450mAh.
1.67WhEstimated Energy
—Estimated Runtime
—Ideal Charge Time
How to Use the Result
The 603030 reference values are prefilled: 3.7 V, 450mAh and a standard-charge reference of approximately 225mA. Adjust the load power and efficiency to compare operating scenarios; the calculator does not infer safe limits from capacity alone.
- Energy = voltage × capacity ÷ 1000
- Runtime estimate = energy × efficiency ÷ load power
- Ideal charge time = capacity ÷ entered charge current
- Actual runtime depends on load profile, temperature, cutoff and system losses
Use the result for early comparison, then confirm the charger, protection, connector and final battery specification through sample testing.
Integration Guidance
Place the 603030 Battery in a Compact Square Pocket
The 603030 format is most useful when the device can reserve a 30mm × 30mm area and approximately 6mm of cell depth. Review board clearance, retention and cable exit around that square starting point.
Reserve a Centered 30mm × 30mm Area
Check the pouch footprint against boards, housing ribs, fasteners and service features before fixing the battery position.
Control the Six-Millimeter Stack
Review cell depth, cushioning and final connection or protection components in the enclosure stack-up.
Compare the 1.67Wh Target with the Load
Use calculated energy for early budgeting, then validate the operating interval against the actual duty cycle and cut-off.
Choose the Connection Path Early
A square pocket can still be constrained by lead exit and connector orientation. Include cable details in the mechanical review.
The stated dimensions and calculated values are reference inputs for design planning. Confirm the finished battery drawing, tolerance, protection, connector and test conditions before production release.
Applications & Solutions
Applications for the 603030 450mAh LiPo Battery
The 603030 format can be evaluated in compact products that have a square or broad internal cavity and need a moderate 450mAh energy reference.
01Compact Medical Instruments
The square footprint can be considered in selected monitoring or diagnostic products where the battery sits within a broad internal cavity.
View Medical Battery Solutions →
02GPS Trackers and Telematics
The 450mAh capacity can be compared with communication intervals and standby requirements when the tracker enclosure can reserve a 30mm × 30mm pocket.
View GPS Tracker Solutions →
03Handheld Instruments and Readers
The 6mm profile and square footprint provide a defined starting point for handheld products that need a central battery area rather than a long channel.
View Handheld Device Solutions →These application paths are starting points for OEM evaluation. Final suitability depends on actual load, runtime, temperature, protection, connector and assembly requirements.
Related Technical Articles
Guidance for 603030 Battery Selection
These guides support the 603030 selection around form factor, current demand and safe pouch-battery integration.
Energy and SizeWhat Is Energy Density in a Lithium Polymer Battery?
Connect the 1.67Wh reference with the square footprint and the device energy budget.
Read the energy and size guide →
Current DemandWhat Is the C Rating of a LiPo Battery and Why It Matters
Review the device load profile before approving the 450mAh configuration and its charger path.
Read the current demand guide →
Protection PlanningWhy Do LiPo Batteries Explode and How to Prevent It
Consider protection, charging, retention and handling requirements in the finished enclosure.
Read the protection planning guide →OEM Battery Support
Start the 603030 Inquiry with the Square Pocket
Share the 30mm × 30mm area, available 6mm depth, load profile, target runtime and connector requirements so ZERNE can review the square 450mAh reference.
Useful RFQ Inputs
The square format should be reviewed with the complete housing and connection plan.
- 30mm × 30mm battery area
- 6mm depth and assembly clearance
- 450mAh runtime target
- Load, charger and protection conditions
- Connector, cable exit and retention
- Quantity, samples and documentation
When a Long or Thin Cell Is Better
ZERNE can compare 323540, 651648 or a custom pouch format when the square 603030 pocket does not match the product.
Discuss a Custom BatteryFAQ
603030 LiPo Battery Questions
Find answers about the 603030 450mAh lithium polymer battery, including its square footprint, calculated energy and OEM integration considerations.
What are the dimensions of the 603030 battery?
The 603030 reference measures 6.0mm in thickness, 30mm in width and 30mm in length.
How much energy does the 603030 battery provide?
At 3.7 V nominal voltage, the rated 450mAh capacity gives approximately 1.67Wh of calculated energy before device cut-off and system losses.
What makes 603030 different from 323540?
Both are 450mAh configurations, but 603030 uses a 6.0mm × 30mm × 30mm square-leaning format while 323540 uses a much thinner 3.2mm × 35mm × 40mm format.
What should be confirmed before electrical approval?
Confirm the charger, protection arrangement, device load, cut-off condition and final electrical limits against the finished 603030 battery assembly.
What current references apply?
The approximate current references are calculated from the 450mAh rated capacity and the 3.7 V LiPo family rates. Final limits require configuration validation.
Can ZERNE customize the 603030 battery?
Yes. ZERNE can review capacity, dimensions, connector, cable, protection and assembly requirements around the square battery pocket.
Technical Inquiry
Review the 603030 Square Battery Fit with ZERNE
Share the 30mm × 30mm battery area, available depth, target runtime, load profile and connector requirements so ZERNE can assess the 603030 450mAh format.
- 30mm × 30mm battery pocket and 6mm depth
- 450mAh energy and runtime target
- Load, charger and protection conditions
- Connector, samples and production plan