Use Thickness as the Primary Selection Axis
The 3.2mm profile can help teams review shallow housings, front-to-back stack-up and cushioning requirements before choosing a wider battery pocket.
3.7 V Lithium Polymer Battery
3.7 V 450mAh Lithium Polymer Battery 323540
The 323540 450mAh LiPo battery uses a 3.2mm-thick, 35mm × 40mm format for OEM products that can provide a wider plan area but have limited depth. Its approximately 1.67Wh calculated energy gives the design team a starting point for runtime and enclosure comparison.
323540 LiPo Battery Reference3.2mm × 35mm × 40mm Format
3.7 V · ≈1.67WhProduct Snapshot
A 3.2mm Profile with a Wider Plan Area
The 323540 reference places 450mAh inside a 3.2mm × 35mm × 40mm envelope. The very thin profile and wider footprint make it a different mechanical choice from the shorter, deeper 450mAh alternatives in this series.
Trade Width for a Moderate Energy Target
The 35mm × 40mm plan area provides space for the 450mAh capacity while changing how the battery sits around boards, displays and retention features.
450mAhRated Capacity
1.67WhCalculated Energy
3.2mmCell Thickness
35mm × 40mmPlan Area
Technical Data
323540 LiPo Battery Specifications
The table separates confirmed configuration data from calculated electrical references so the 323540 format can be reviewed quickly during product planning.
| Mechanical and Electrical Specifications | |
|---|---|
| Product Number | 323540 |
| Nominal Voltage | 3.7 V |
| Rated Capacity | 450mAh |
| Battery Dimension | 3.2mm × 35mm × 40mm |
| Approximate Battery Weight | Approx. 9g |
| Calculated Electrical References | |
| Standard Charge Current | Approx. 225mA |
| Rapid Charge Current | Approx. 450mA |
| Standard Discharge Current | Approx. 90mA |
| Maximum Discharge Current | Approx. 450mA |
| Calculated Energy | Approx. 1.67Wh |
Approximate weight follows the 3.7 V LiPo family reference. Current and energy values are calculated planning references, not measured limits; confirm the final charger, protection and load specification for the finished battery.
Product Characteristics & Advantages
A Thin Wide 450mAh Format for Shallow Battery Pockets: Why Evaluate the 323540 LiPo Battery?
The 323540 page is differentiated by its shallow 3.2mm profile and wide 35mm × 40mm plan area. It should be compared with other 450mAh cells through mechanical fit first, then through capacity, connector and application requirements.
The calculated electrical references provide a structured starting point for charger, load and protection discussions. Share the finished product requirements with ZERNE to confirm the final battery design and assembly details.
3.2mm for Shallow Enclosure Planning
The thin dimension provides a clear starting point for products where battery depth competes with displays, boards, housings or wearable comfort.
35mm × 40mm for Distributed Placement
The wider plan area may suit a product that can allocate surface area but cannot accommodate a deep or long battery pocket.
Approximately 1.67Wh for Runtime Comparison
The calculated energy can be compared with sensing, display, communication and standby requirements in the finished product.
Check Cushioning and Edge Retention
A shallow pouch still needs appropriate protection, retention, lead routing and enclosure clearance in the completed assembly.
A Thin Reference for a Custom Discussion
ZERNE can review alternate width, length, capacity, protection and connector arrangements when the wide 323540 format is close but not exact.
Battery Calculation
Check 323540 Energy and Estimated Runtime
Use the prefilled 323540 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Approx. 225mA is the approximate standard-charge reference for 450mAh.
1.67WhEstimated Energy
—Estimated Runtime
—Ideal Charge Time
How to Use the Result
The 323540 reference values are prefilled: 3.7 V, 450mAh and a standard-charge reference of approximately 225mA. Adjust the load power and efficiency to compare operating scenarios; the calculator does not infer safe limits from capacity alone.
- Energy = voltage × capacity ÷ 1000
- Runtime estimate = energy × efficiency ÷ load power
- Ideal charge time = capacity ÷ entered charge current
- Actual runtime depends on load profile, temperature, cutoff and system losses
Use the result for early comparison, then confirm the charger, protection, connector and final battery specification through sample testing.
Integration Guidance
Integrate the 323540 Battery Around a 3.2mm Depth Limit
The 323540 selection is primarily a mechanical decision. Check the 3.2mm cell thickness against the enclosure stack, then reserve the 35mm × 40mm area and the clearance needed for the finished assembly.
Measure the Shallow Stack-Up
Review board, display, cushioning, enclosure wall and retention tolerances around the 3.2mm nominal cell thickness.
Plan the Wider Battery Area
The 35mm × 40mm footprint should be placed where it does not obstruct board access, cable routing or service features.
Use 1.67Wh for Early Energy Budgeting
Compare the calculated energy with the load profile and cut-off condition; usable runtime must be validated in the finished device.
Confirm the Connection Layout
Lead exit and connector position can determine whether the wide pouch fits cleanly. Include cable details in the RFQ.
The stated dimensions and calculated values are reference inputs for design planning. Confirm the finished battery drawing, tolerance, protection, connector and test conditions before production release.
Applications & Solutions
Applications for the 323540 450mAh LiPo Battery
The 323540 450mAh format can be evaluated in products with shallow battery depth and enough surface area for a 35mm × 40mm pouch footprint.
01Thin Wearable and Personal Electronics
The 3.2mm profile can support early mechanical evaluation in wearable or compact personal devices where depth is more constrained than plan area.
View Wearable Battery Solutions →
02Portable Medical Instruments
The shallow pouch can be reviewed in selected medical or diagnostic housings where the battery must sit beneath a cover or alongside a flat electronics stack.
View Medical Battery Solutions →
03Flat Handheld Electronics
The 35mm × 40mm area can be compared with handheld housings that have a broad internal surface but limited depth for the cell.
View Handheld Device Solutions →These application paths are starting points for OEM evaluation. Final suitability depends on actual load, runtime, temperature, protection, connector and assembly requirements.
Related Technical Articles
Guidance for 323540 Battery Selection
These articles support a thin-battery decision around energy density, current planning and safe LiPo integration.
Energy and Form FactorWhat Is Energy Density in a Lithium Polymer Battery?
Review how a wide, thin pouch can trade physical area and depth against the desired energy target.
Read the energy and form factor guide →
Current DemandWhat Is the C Rating of a LiPo Battery and Why It Matters
Connect the 450mAh capacity with the device load profile and charger discussion.
Read the current demand guide →
Safe Enclosure DesignWhy Do LiPo Batteries Explode and How to Prevent It
Review the protection, charging, compression and handling requirements of a pouch cell in a shallow enclosure.
Read the safe enclosure design guide →OEM Battery Support
Start the 323540 Inquiry with the Available Depth
Share the available 3.2mm depth, 35mm × 40mm pocket, target runtime, load profile and connector details so ZERNE can assess the thin 450mAh reference in the finished product.
Useful RFQ Inputs
The 323540 decision depends on how much surface area is available and how tightly the final stack is controlled.
- 3.2mm depth and compression clearance
- 35mm × 40mm battery area
- Target runtime and device duty cycle
- Charger, protection and load profile
- Connector, lead exit and retention
- Samples, quantity and documentation
When a Different Geometry Is Better
ZERNE can compare a square, long or custom pouch format when the 323540 width or depth does not match the finished device.
Discuss a Custom BatteryFAQ
323540 LiPo Battery Questions
Find answers about the 323540 450mAh lithium polymer battery, including its thin profile, wide footprint, calculated energy and application fit.
What are the dimensions of the 323540 battery?
The 323540 reference measures 3.2mm in thickness, 35mm in width and 40mm in length.
How much energy does the 323540 450mAh battery provide?
At 3.7 V nominal voltage, the rated 450mAh capacity gives approximately 1.67Wh of calculated energy before device cut-off and system losses.
What is the main advantage of the 323540 format?
Its primary differentiator is the 3.2mm thickness, which gives OEM teams a thin reference when the enclosure can provide a wider 35mm × 40mm battery area.
What current references apply to this configuration?
The approximate current values are calculated from the 450mAh rating and the 3.7 V LiPo family rates. Confirm final limits for the completed battery.
How should the thin 323540 format be validated?
Review the 3.2mm depth, 35mm × 40mm footprint, charger, protection, load profile and enclosure tolerances during sample validation.
Can ZERNE customize a thin 323540 battery?
Yes. ZERNE can review thickness, width, length, capacity, connector, protection and assembly requirements for the target product.
Technical Inquiry
Review the 323540 Thin Battery Fit with ZERNE
Share the available depth, 35mm × 40mm battery area, operating interval, load profile and connector requirements so ZERNE can assess the 323540 450mAh format.
- Available depth and 35mm × 40mm pocket
- 450mAh energy target and runtime
- Load, charger and protection conditions
- Connector, samples and production plan