A Modest Energy Increase in the Same Format
The 380mAh rating gives product teams a clear step above 365mAh when the device needs additional operating reserve but does not require the 650mAh target.
3.7 V Lithium Polymer Battery
3.7 V 380mAh Lithium Polymer Battery 502236
The 502236 380mAh LiPo battery provides a balanced capacity step inside the 5.0mm × 22mm × 36mm dimensional format. It is intended for OEM teams that need more energy than the 365mAh version while keeping the same compact battery-pocket starting point.
502236 LiPo Battery Reference5.0mm × 22mm × 36mm Format
3.7 V · ≈1.41WhProduct Snapshot
A Mid-Range Capacity Choice Without a New Pocket
The 502236 380mAh configuration provides approximately 1.41Wh of calculated energy in the same 5mm-thick, 22mm × 36mm format used for the 365mAh and 650mAh capacity options. This makes the configuration useful for a capacity-versus-runtime comparison within one dimensional family.
Keep the Mechanical Decision Stable
The 5.0mm × 22mm × 36mm envelope lets the team compare capacity options before changing the housing, retention features or cable route.
380mAhRated Capacity
1.41WhCalculated Energy
5.0mmCell Thickness
22mm × 36mmPlan Area
Technical Data
502236 LiPo Battery Specifications
The table separates confirmed configuration data from calculated electrical references so the 502236 format can be reviewed quickly during product planning.
| Mechanical and Electrical Specifications | |
|---|---|
| Product Number | 502236 |
| Nominal Voltage | 3.7 V |
| Rated Capacity | 380mAh |
| Battery Dimension | 5.0mm × 22mm × 36mm |
| Approximate Battery Weight | Approx. 7.6g |
| Calculated Electrical References | |
| Standard Charge Current | Approx. 190mA |
| Rapid Charge Current | Approx. 380mA |
| Standard Discharge Current | Approx. 76mA |
| Maximum Discharge Current | Approx. 380mA |
| Calculated Energy | Approx. 1.41Wh |
Approximate weight follows the 3.7 V LiPo family reference. Current and energy values are calculated planning references, not measured limits; confirm the final charger, protection and load specification for the finished battery.
Product Characteristics & Advantages
A Balanced 380mAh Capacity Step in the 502236 Format: Why Evaluate the 502236 LiPo Battery?
The 502236 380mAh page owns the middle capacity step of this same-model group. Its main decision value is the balance between a compact 5mm × 22mm × 36mm pocket and a higher energy target than 365mAh, while remaining below the existing 650mAh configuration.
The calculated electrical references provide a structured starting point for charger, load and protection discussions. Share the finished product requirements with ZERNE to confirm the final battery design and assembly details.
380mAh for a Moderate Runtime Increase
The 380mAh rating can be considered when 365mAh is close to the target but the design team wants additional energy before moving to the 650mAh option.
One Battery Pocket for Several Capacity Discussions
The shared 502236 envelope helps teams compare runtime and capacity without treating every choice as a new mechanical design.
A Clear Energy Input for System Planning
The calculated energy supports early comparison of active duty, standby time and service interval in the finished device.
Recalculate the Electrical References for 380mAh
The approximate references are derived from the current capacity. They are not copied from either the 365mAh or 650mAh page.
A Practical Point Between Two Capacity Extremes
ZERNE can review the 365mAh, 380mAh and 650mAh configurations alongside connector, protection and production requirements.
Battery Calculation
Check 502236 Energy and Estimated Runtime
Use the prefilled 502236 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Approx. 190mA is the approximate standard-charge reference for 380mAh.
1.41WhEstimated Energy
—Estimated Runtime
—Ideal Charge Time
How to Use the Result
The 502236 reference values are prefilled: 3.7 V, 380mAh and a standard-charge reference of approximately 190mA. Adjust the load power and efficiency to compare operating scenarios; the calculator does not infer safe limits from capacity alone.
- Energy = voltage × capacity ÷ 1000
- Runtime estimate = energy × efficiency ÷ load power
- Ideal charge time = capacity ÷ entered charge current
- Actual runtime depends on load profile, temperature, cutoff and system losses
Use the result for early comparison, then confirm the charger, protection, connector and final battery specification through sample testing.
Integration Guidance
Evaluate the 502236 380mAh Battery Around the Same Compact Pocket
The 380mAh configuration is a capacity decision inside a defined mechanical envelope. Check the 5mm depth, 22mm × 36mm footprint, connector path and required energy before selecting between the 365mAh and 650mAh versions.
Keep the Pocket Unchanged During Comparison
Use the 5.0mm × 22mm × 36mm reference to compare capacity first, then add the clearance required by the completed assembly.
Use 1.41Wh as a Planning Reference
Compare the calculated energy with the device load and cut-off condition. The result is not a guaranteed usable energy value.
Review Charger and Load Together
Capacity-specific current references help start the conversation, while the final charger and protection design determine final limits.
Leave Room for Capacity Selection
If the runtime target changes during development, the 365mAh and 650mAh options provide useful same-model comparison points.
The stated dimensions and calculated values are reference inputs for design planning. Confirm the finished battery drawing, tolerance, protection, connector and test conditions before production release.
Applications & Solutions
Applications for the 502236 380mAh LiPo Battery
The 502236 380mAh configuration can be evaluated in compact portable products that need a moderate energy reserve and a short, 5mm-deep battery pocket.
01Portable Medical and Diagnostic Devices
The 380mAh energy target can support early runtime comparison in compact medical equipment where a short rectangular pocket is easier to reserve than a larger cell area.
View Medical Battery Solutions →
02Handheld Instruments
The 5mm profile and 22mm × 36mm plan area can be reviewed in handheld products where board placement, grip space and cable access must be balanced.
View Handheld Device Solutions →
03GPS Trackers and Connected Devices
The 380mAh configuration offers a middle capacity point for tracking products whose reporting interval and service target sit between the lower and higher 502236 options.
View GPS Tracker Solutions →These application paths are starting points for OEM evaluation. Final suitability depends on actual load, runtime, temperature, protection, connector and assembly requirements.
Related Technical Articles
Guidance for 502236 Battery Selection
These resources help connect the middle 502236 capacity step with current demand, energy density and safe battery integration.
Energy PlanningWhat Is Energy Density in a Lithium Polymer Battery?
Use energy and physical envelope together when comparing a 380mAh cell with the other 502236 capacity configurations.
Read the energy planning guide →
Current DemandWhat Is the C Rating of a LiPo Battery and Why It Matters
Review how the load profile and charger affect the selection of a capacity-specific battery configuration.
Read the current demand guide →
Safe IntegrationWhy Do LiPo Batteries Explode and How to Prevent It
Consider protection, charging, handling and enclosure conditions before approving the 502236 assembly.
Read the safe integration guide →OEM Battery Support
Start the 502236 380mAh Inquiry with the Capacity Decision
Share the desired runtime, load profile, 5.0mm × 22mm × 36mm pocket and expected quantity so ZERNE can help compare 365mAh, 380mAh and 650mAh within the same model family.
Useful RFQ Inputs
A capacity comparison is more useful when the available pocket and the actual device duty cycle are described together.
- Target runtime and duty cycle
- 5mm depth and 22mm × 36mm clearance
- 380mAh target versus alternate capacities
- Charger, protection and load profile
- Connector, cable exit and retention
- Samples, quantity and approval plan
When the 380mAh Step Is Not Enough
ZERNE can review the 365mAh or 650mAh 502236 configuration, or develop another capacity and geometry, when the device target changes.
Discuss a Custom BatteryFAQ
502236 LiPo Battery Questions
Find answers about the 502236 380mAh lithium polymer battery, its shared dimensional format, calculated energy and relationship to the other 502236 capacity options.
What are the dimensions of the 502236 380mAh battery?
The 502236 380mAh reference measures 5.0mm in thickness, 22mm in width and 36mm in length. Confirm the finished assembly clearance around the pouch.
How much energy does the 380mAh battery provide?
At 3.7 V nominal voltage, the rated 380mAh capacity gives approximately 1.41Wh of calculated energy before device cut-off and system losses.
Why choose 380mAh instead of 365mAh?
The 380mAh configuration provides a modestly higher energy target while retaining the same 502236 dimensional format. The right choice depends on the actual runtime and load profile.
How is the 380mAh page different from the existing 650mAh page?
The 380mAh page targets a lower energy requirement within the same dimensional format. The 650mAh page is intended for projects that need a larger operating reserve.
Are the current references measured limits?
They are calculated approximate planning references based on the rated capacity and the stated 3.7 V LiPo family rates. Confirm final limits in the battery specification and sample validation.
Can ZERNE customize the 502236 configuration?
Yes. ZERNE can review capacity, protection, connector, wiring, assembly and other requirements around the 5.0mm × 22mm × 36mm format.
Technical Inquiry
Review the 502236 380mAh Capacity Step with ZERNE
Share your target runtime, current profile, 22mm × 36mm pocket, charger and preferred capacity step so ZERNE can compare the 380mAh configuration with the other 502236 options.
- Target runtime and duty cycle
- 365mAh, 380mAh or 650mAh selection
- 5.0mm × 22mm × 36mm battery pocket
- Charger, connector and protection requirements