Choose the Lower Energy Target Deliberately
The 365mAh rating is suited to projects that need a defined compact capacity but do not need the full energy reserve of the 650mAh configuration.
3.7 V Lithium Polymer Battery
3.7 V 365mAh Lithium Polymer Battery 502236
The 502236 365mAh LiPo battery represents a lower-capacity configuration in the 5.0mm × 22mm × 36mm dimensional format. It is intended for OEM teams that want a compact battery pocket and a defined energy target without selecting the larger 650mAh version when the device load does not require it.
502236 LiPo Battery Reference5.0mm × 22mm × 36mm Format
3.7 V · ≈1.35WhProduct Snapshot
A 365mAh Configuration in the 502236 Format
The 502236 365mAh configuration provides approximately 1.35Wh of calculated energy in a 5mm-thick, 22mm × 36mm pouch format. It gives buyers a lower-capacity point of comparison against the 380mAh and 650mAh versions of the same dimensional model.
Keep the 502236 Pocket Consistent
The 5mm × 22mm × 36mm envelope keeps the mechanical selection focused on the same compact format while capacity, runtime and load expectations change.
365mAhRated Capacity
1.35WhCalculated Energy
5.0mmCell Thickness
22mm × 36mmPlan Area
Technical Data
502236 LiPo Battery Specifications
The table separates confirmed configuration data from calculated electrical references so the 502236 format can be reviewed quickly during product planning.
| Mechanical and Electrical Specifications | |
|---|---|
| Product Number | 502236 |
| Nominal Voltage | 3.7 V |
| Rated Capacity | 365mAh |
| Battery Dimension | 5.0mm × 22mm × 36mm |
| Approximate Battery Weight | Approx. 7.3g |
| Calculated Electrical References | |
| Standard Charge Current | Approx. 182.5mA |
| Rapid Charge Current | Approx. 365mA |
| Standard Discharge Current | Approx. 73mA |
| Maximum Discharge Current | Approx. 365mA |
| Calculated Energy | Approx. 1.35Wh |
Approximate weight follows the 3.7 V LiPo family reference. Current and energy values are calculated planning references, not measured limits; confirm the final charger, protection and load specification for the finished battery.
Product Characteristics & Advantages
A Lower-Capacity 502236 Reference for Compact Runtime Targets: Why Evaluate the 502236 LiPo Battery?
The 502236 365mAh page owns the lower-capacity position within a shared dimensional format. Its selection logic centers on matching a moderate energy requirement to the available 22mm × 36mm pocket, rather than choosing a higher-capacity configuration that the device may not need.
The calculated electrical references provide a structured starting point for charger, load and protection discussions. Share the finished product requirements with ZERNE to confirm the final battery design and assembly details.
A Moderate 365mAh Energy Target
The 365mAh configuration helps teams screen runtime and duty-cycle requirements before moving to the 380mAh or 650mAh versions.
5mm × 22mm × 36mm for Compact Packaging
The same dimensional format allows a mechanical team to compare capacity choices without immediately redesigning the battery pocket.
Approximately 1.35Wh for Early Budgeting
The calculated energy can be compared with reporting frequency, active time, standby draw and the device cut-off condition.
Capacity-Specific Charger and Load Inputs
The calculated current values are rebuilt for 365mAh and should not be copied from the 380mAh or 650mAh pages.
A Reference Configuration Within an OEM Range
ZERNE can review protection, connector, lead length and alternate capacity requirements when the 365mAh reference is close but not exact.
Battery Calculation
Check 502236 Energy and Estimated Runtime
Use the prefilled 502236 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Approx. 182.5mA is the approximate standard-charge reference for 365mAh.
1.35WhEstimated Energy
—Estimated Runtime
—Ideal Charge Time
How to Use the Result
The 502236 reference values are prefilled: 3.7 V, 365mAh and a standard-charge reference of approximately 182.5mA. Adjust the load power and efficiency to compare operating scenarios; the calculator does not infer safe limits from capacity alone.
- Energy = voltage × capacity ÷ 1000
- Runtime estimate = energy × efficiency ÷ load power
- Ideal charge time = capacity ÷ entered charge current
- Actual runtime depends on load profile, temperature, cutoff and system losses
Use the result for early comparison, then confirm the charger, protection, connector and final battery specification through sample testing.
Integration Guidance
Use the 502236 365mAh Format for a Defined Battery Pocket
The 502236 365mAh configuration should be assessed around its 5.0mm depth and 22mm × 36mm plan area. The key question is whether the lower capacity meets the device duty cycle while preserving the planned enclosure and connection layout.
Check the 5mm Stack-Up
Reserve the pouch thickness plus cushioning, retention and protection clearance. Do not treat the nominal cell depth as the complete assembly envelope.
Match 1.35Wh with the Duty Cycle
Compare the calculated energy with active operation, standby intervals and the device cut-off rather than selecting by capacity alone.
Keep Capacity Variants Visible
The same model has 365mAh, 380mAh and 650mAh configurations in the current series discussion. Keep the runtime target in the comparison.
Confirm the Electrical Interface
Review charger, protection, cable, connector and load requirements with the final battery drawing and sample test plan.
The stated dimensions and calculated values are reference inputs for design planning. Confirm the finished battery drawing, tolerance, protection, connector and test conditions before production release.
Applications & Solutions
Applications for the 502236 365mAh LiPo Battery
The 502236 365mAh configuration can be evaluated in compact OEM products that need a moderate energy reserve, a 5mm profile and a short rectangular battery pocket.
01Compact GPS and Asset Trackers
The 365mAh target can support early comparison of reporting interval and standby requirements when a tracker can reserve a 22mm × 36mm battery area.
View GPS Tracker Solutions →
02Portable Monitoring Equipment
The short rectangular footprint can be reviewed in compact monitoring products where the runtime target is moderate and the enclosure cannot accept a larger pocket.
View Medical Battery Solutions →
03Wearable and Personal Devices
The 5mm thickness gives the mechanical team a clear starting boundary for compact wearable or portable equipment while the 365mAh capacity defines the initial energy budget.
View Wearable Battery Solutions →These application paths are starting points for OEM evaluation. Final suitability depends on actual load, runtime, temperature, protection, connector and assembly requirements.
Related Technical Articles
Guidance for 502236 Battery Selection
These articles support the 502236 365mAh selection around energy planning, current demand and operating conditions.
Current DemandWhat Is the C Rating of a LiPo Battery and Why It Matters
Connect the device load profile with charger and discharge planning before approving the lower-capacity configuration.
Read the current demand guide →
Energy PlanningWhat Is Energy Density in a Lithium Polymer Battery?
Use energy and physical volume together when comparing the 365mAh, 380mAh and 650mAh choices.
Read the energy planning guide →
Operating ConditionsHow Temperature Affects the Performance of a LiPo Battery
Review how the finished environment, charging window and device load can affect the usable operating interval.
Read the operating conditions guide →OEM Battery Support
Start the 502236 365mAh Inquiry with the Duty Cycle
Share the target runtime, load profile, 5.0mm × 22mm × 36mm battery pocket and capacity preference so the 365mAh configuration can be compared with the other 502236 options.
Useful RFQ Inputs
The capacity choice is easier to evaluate when the mechanical pocket and operating interval are described together.
- Target runtime and reporting interval
- 5mm depth and 22mm × 36mm pocket
- Continuous and peak load profile
- Charger, protection and connector
- 365mAh versus higher-capacity options
- Quantity, samples and validation timing
When a Different Capacity Is Better
ZERNE can review the 380mAh or 650mAh 502236 configuration, or another geometry, when the device energy target changes.
Discuss a Custom BatteryFAQ
502236 LiPo Battery Questions
Find answers about the 502236 365mAh lithium polymer battery, including its shared dimensional format, calculated energy and capacity-selection logic.
What are the dimensions of the 502236 365mAh battery?
The 502236 365mAh reference measures 5.0mm in thickness, 22mm in width and 36mm in length. Allow additional space for the finished assembly.
How much energy does the 365mAh configuration provide?
At 3.7 V nominal voltage, the 365mAh rated capacity gives approximately 1.35Wh of calculated energy before device cut-off and system losses.
How does 365mAh differ from the 380mAh and 650mAh versions?
All three are capacity-specific 502236 configurations. The 365mAh page targets a lower energy requirement, 380mAh provides the next modest step, and 650mAh is the higher-reserve option.
Are the current references copied from the 650mAh page?
No. The current references are calculated for the 365mAh rated capacity and should be validated against the final charger, protection and device load.
Can the 502236 format be customized?
Yes. ZERNE can discuss capacity, connector, cable, protection and assembly requirements around the 5.0mm × 22mm × 36mm reference envelope.
What should be checked before approving the battery?
Review the capacity against the complete duty cycle, then confirm pocket clearance, charger, protection, lead exit, connector and sample-testing requirements.
Technical Inquiry
Compare the 502236 365mAh Battery with Your Runtime Target
Share the application, desired operating interval, 22mm × 36mm battery pocket, load profile and capacity preference so ZERNE can help select the appropriate 502236 configuration.
- Device load and target runtime
- 365mAh, 380mAh or 650mAh preference
- 5.0mm × 22mm × 36mm clearance
- Charger, connector and protection requirements