3.40Wh Calculated Energy for Early Runtime Planning
The confirmed 3.7V nominal voltage and 920mAh rated capacity provide approximately 3.40Wh before system losses, cutoff effects and application-specific derating.
3.7V Lithium Polymer Battery · 500–1000mAh Range
3.7 V 920mAh Lithium Polymer Battery 102930
The 102930 LiPo battery provides a 3.7V nominal platform and 920mAh rated capacity in a 10mm × 29mm × 30mm pouch format. A short 920mAh format with a 29mm width and only 30mm length for compact enclosure zones.
10293029mm30mm10mm
102930920mAh · 3.7V10mm × 29mm × 30mm
102930 LiPo BatteryApprox. 3.40Wh calculated energy in a 920mAh-class pouch format
3.7V · 10mm × 29mm × 30mm reference visualProduct snapshot
A 920mAh short broad-pocket reference for short and wide compact enclosures
The 102930 model is positioned around short broad-pocket geometry rather than capacity alone. It is useful where the battery pocket is short and broad rather than long and narrow. A short 920mAh format with a 29mm width and only 30mm length for compact enclosure zones.
A 29mm × 30mm Short Broad-Pocket Footprint
The 10mm × 29mm × 30mm envelope supports early review of the battery pocket, enclosure depth, cushioning, retention and connector access.
Selection focus for 102930
A short 920mAh format with a 29mm width and only 30mm length for compact enclosure zones. The first engineering screen is the 29mm × 30mm plan area, followed by the 10mm stack-up and the 920mAh energy target. The short length is the main selection point. Confirm that the 29mm width and 10mm thickness can be reserved without obstructing the PCB or enclosure closure. For the device team, It is useful where the battery pocket is short and broad rather than long and narrow. Provide the short-pocket drawing, 29mm width, 10mm depth and cable-exit direction. This sequence keeps geometry, energy planning and electrical validation in one practical selection path.
3.7V · 920mAhNominal voltage · rated capacity
≈18gCalculated weight reference
≈460 / 920mACharge current · standard / rapid
≈184 / 920mADischarge current · standard / maximum
Current, energy and weight values are calculated references for early planning. Confirm final limits and the finished battery configuration with ZERNE.
Technical data
102930 LiPo Battery Specifications
These specifications summarize the 102930 reference format. A short 920mAh format with a 29mm width and only 30mm length for compact enclosure zones. Confirm final construction, protection, connector and validation conditions for the finished OEM battery configuration.
| 102930 Mechanical and Electrical Specifications | |
|---|---|
| Product number | 102930 |
| Nominal voltage | 3.7V |
| Rated capacity | 920mAh |
| Confirmed C-rate | 1C |
| Battery dimension | 10mm × 29mm × 30mm |
| Listed internal resistance | 70mΩ |
| Calculated Electrical References | |
| Standard charge current | Approx. 460mA |
| Rapid charge current | Approx. 920mA |
| Standard discharge current | Approx. 184mA |
| Maximum discharge current | Approx. 920mA |
| Calculated energy | Approx. 3.40Wh |
The direct 102930 values are used as the model reference. Current, energy and weight figures are calculated references rather than measured production results. Confirm the final charging profile, discharge demand, protection configuration, connector, tolerances and validation conditions with ZERNE for the finished device.
Product characteristics & advantages
Why Evaluate the 102930 920mAh LiPo Battery?
The 102930 model is positioned around short broad-pocket geometry rather than capacity alone. It is useful where the battery pocket is short and broad rather than long and narrow. A short 920mAh format with a 29mm width and only 30mm length for compact enclosure zones. The geometry and energy-planning tradeoff are the primary selection focus for this reference model.
The 102930 page focuses on the decision most relevant to this reference: A short 920mAh format with a 29mm width and only 30mm length for compact enclosure zones. Its capacity, geometry, listed resistance and 1C family rate should be evaluated together with the finished device load and enclosure.
920mAh for Short And Wide Compact Enclosures
The 920mAh rated capacity provides a defined basis for comparing runtime, standby intervals and service targets in short and wide compact enclosures.
29mm × 30mm Battery Footprint
The 10mm × 29mm × 30mm envelope gives engineering teams a concrete reference for enclosure clearance, retention, cable exit and component placement.
10mm Thickness to Check Early
Review the listed 10mm profile with housing tolerances, cushioning and nearby electronics before finalizing the battery pocket.
70mΩ Internal Resistance Reference
The listed 70mΩ resistance can support early voltage-drop discussion for this short broad-pocket format; validate the finished battery under actual load and temperature conditions.
Battery calculation
Check 102930 Energy and Estimated Runtime
Use the prefilled 102930 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Runtime is an estimate, not guaranteed product performance.
3.40WhEstimated energy
6.13hEstimated runtime
How to Use the Result
The 102930 values are prefilled: 3.7V and 920mAh. Adjust the load power and efficiency to compare different operating scenarios.
- Energy is estimated from nominal voltage and capacity
- Runtime estimate = energy × efficiency ÷ load power
- Actual runtime depends on load profile, cutoff, temperature and system losses
- Use sample testing to validate the final battery and device combination
Use the result as an initial estimate, then discuss charger validation and the final battery specification with ZERNE.
Integration guidance
Plan the 102930 Battery Around the 10mm × 29mm × 30mm Envelope
Reserve the stated battery pocket, allow for the 10mm thickness, review cable and connector access, and validate the charger, protection and finished load profile before production. The short length is the main selection point. Confirm that the 29mm width and 10mm thickness can be reserved without obstructing the PCB or enclosure closure.
Reserve the 29mm × 30mm Battery Area
Allow space for the pouch cell, enclosure walls, cushioning, retention features, cable exit and service access around the listed footprint.
Check the 10mm Profile
Review compression risk, enclosure tolerances and adjacent components around the battery before finalizing the mechanical design.
Confirm Electrical and Protection Requirements
Use the calculated 460mA standard-charge, 920mA rapid-charge, 184mA standard-discharge and 920mA maximum-discharge references for early review, then validate the finished battery assembly.
Applications & solution paths
Applications for the 102930 920mAh LiPo Battery
The 102930 format can be considered for products that match its 10mm × 29mm × 30mm envelope and 920mAh energy target. It is useful where the battery pocket is short and broad rather than long and narrow. Final suitability depends on device load, runtime, enclosure, charging and connector requirements.
01Smart Watches
The 10 mm × 29 mm × 30 mm pouch can be compared with smartwatch housing space, display layout, comfort and cable routing before finalizing the battery.
View Smart Watches solutions →
02Portable ECG Monitors
The 920 mAh and calculated energy reference can support early runtime comparisons in portable ECG equipment; confirm load profile, protection and documentation needs.
View Portable ECG Monitors solutions →
03Air Purifiers
The reference can support early review of connected air-purifier layouts where the battery pocket, airflow path and service access must be balanced.
View Air Purifiers solutions →
04POS Machines
The 10 mm × 29 mm × 30 mm plan area can be assessed in a POS terminal where display, scanner, controls and enclosure clearance influence the battery pocket.
View POS Machines solutions →The 102930 is positioned within ZERNE's 3.7V 500–1000mAh lithium polymer battery range. Ask ZERNE to confirm the final construction, protection, connector, charging limits and validation plan for the required device.
Related technical articles
Technical Guidance for 102930 LiPo Integration
Use these resources to review the energy, geometry, current and safety questions most relevant to a 10mm × 29mm × 30mm pouch battery.
C-RatingWhat Is the C Rating of a LiPo Battery and Why It Matters
Relate device current demand to charge, discharge and protection planning before finalizing the battery configuration.
Read the technical guide →
RuntimeHow Long Does a Lithium Polymer Battery Work?
Translate the capacity reference into a realistic runtime discussion using the actual device load and cutoff.
Read the technical guide →
TemperatureHow Temperature Affects the Performance of a LiPo Battery
Keep temperature, resistance, charging limits and the usable energy window in the final validation plan.
Read the technical guide →OEM battery support
Start the 102930 Battery Inquiry with the Device Power Profile
A complete inquiry can include the required runtime, device load, 10mm × 29mm × 30mm battery pocket, charger, connector and documentation needed to evaluate this 920mAh reference format. Provide the short-pocket drawing, 29mm width, 10mm depth and cable-exit direction.
Information to Include in Your Inquiry
Share the product conditions that determine how the 102930 format will fit and perform in the finished device, especially its battery pocket, load and charging window.
- Target runtime and duty cycle
- Voltage, capacity and battery pocket
- 10mm depth and enclosure clearance
- Charger and charging conditions
- Operating and storage environment
- Connector, quantity and approval timing
When the Reference Format Is Not Enough
ZERNE can discuss alternate capacity, geometry, protection, connector and assembly requirements when the 102930 specification does not match the finished product.
Discuss a Custom BatteryFAQ
102930 LiPo Battery Questions
Find answers about the 102930 3.7V 920mAh lithium polymer battery, including its dimensions, calculated energy, current references and OEM integration considerations.
What Are the Dimensions of the 102930 LiPo Battery?
The 102930 battery measures 10mm in thickness, 29mm in width and 30mm in length.
What Capacity and Energy Does the 102930 Battery Provide?
The listed rated capacity is 920mAh at a nominal voltage of 3.7V. The calculated energy is approximately 3.40Wh before system losses.
What Charge and Discharge Current References Apply to 102930?
The calculated references are approximately 460mA for standard charging, 920mA for rapid charging, 184mA for standard discharge and 920mA for maximum discharge. Confirm the final production limits and test conditions with ZERNE.
What Is the Approximate Weight of the 102930 Battery?
The calculated weight reference is approximately 18g. Final weight can vary with the completed battery configuration and should be confirmed during sampling.
What Internal Resistance Is Listed for the 102930 Battery?
The supplied reference lists internal resistance of 70mΩ. Actual system behavior should be checked under the finished load, temperature and assembly conditions.
How Should the 102930 Format Be Screened During Early Design?
A short 920mAh format with a 29mm width and only 30mm length for compact enclosure zones. Confirm the usable pocket and calculated electrical references before requesting samples.
What Is the Main Advantage of the 102930 Battery Format?
The 102930 provides a 920mAh-class capacity in a 10mm × 29mm × 30mm pouch envelope, giving OEM teams a concrete starting point for product-space and energy planning.
Can the 102930 Battery Be Customized?
The 102930 is a reference model. ZERNE can discuss alternate capacity, dimensions, protection, connector and wiring requirements when the listed format does not match the finished product.
What Should Be Confirmed Before Integrating the 102930 Battery?
Review the stated battery area, 10mm depth, load profile, charging conditions, protection design, connector, cable exit and enclosure retention with ZERNE.
Lithium polymer battery inquiry
Review the 102930 Battery Fit with ZERNE
Share the application, runtime target, load profile, 10mm × 29mm × 30mm battery area, charging conditions and annual demand so ZERNE can recommend the right sample and validation path. Provide the short-pocket drawing, 29mm width, 10mm depth and cable-exit direction.
- Product model and target application
- Required voltage, capacity and runtime
- Battery-pocket dimensions and clearance
- Charger, connector and documentation needs