2.96Wh Calculated Energy for Early Runtime Planning
The confirmed 3.7V nominal voltage and 800mAh rated capacity provide approximately 2.96Wh before system losses, cutoff effects and application-specific derating.
3.7V Lithium Polymer Battery · 500–1000mAh Range
3.7 V 800mAh Lithium Polymer Battery 822143
The 822143 LiPo battery provides a 3.7V nominal platform and 800mAh rated capacity in a 8.2mm × 21mm × 43mm pouch format. An 800mAh compact rectangular reference with a short 43mm length and 21mm width.
82214321mm43mm8.2mm
822143800mAh · 3.7V8.2mm × 21mm × 43mm
822143 LiPo BatteryApprox. 2.96Wh calculated energy in a 800mAh-class pouch format
3.7V · 8.2mm × 21mm × 43mm reference visualProduct snapshot
A 800mAh short rectangular reference for short-pocket electronics
The 822143 model is positioned around short rectangular geometry rather than capacity alone. It fits compact electronics that value a short battery envelope and a middle-range capacity target. An 800mAh compact rectangular reference with a short 43mm length and 21mm width.
A 21mm × 43mm Short Rectangular Footprint
The 8.2mm × 21mm × 43mm envelope supports early review of the battery pocket, enclosure depth, cushioning, retention and connector access.
Selection focus for 822143
An 800mAh compact rectangular reference with a short 43mm length and 21mm width. The first engineering screen is the 21mm × 43mm plan area, followed by the 8.2mm stack-up and the 800mAh energy target. The short length can simplify placement, but the 8.2mm thickness needs to be checked against the display, PCB and enclosure wall before finalizing the pocket. For the device team, It fits compact electronics that value a short battery envelope and a middle-range capacity target. Share the short-pocket layout, 21mm width, 8.2mm depth and the intended connector exit. This sequence keeps geometry, energy planning and electrical validation in one practical selection path.
3.7V · 800mAhNominal voltage · rated capacity
≈16gCalculated weight reference
≈400 / 800mACharge current · standard / rapid
≈160 / 800mADischarge current · standard / maximum
Current, energy and weight values are calculated references for early planning. Confirm final limits and the finished battery configuration with ZERNE.
Technical data
822143 LiPo Battery Specifications
These specifications summarize the 822143 reference format. An 800mAh compact rectangular reference with a short 43mm length and 21mm width. Confirm final construction, protection, connector and validation conditions for the finished OEM battery configuration.
| 822143 Mechanical and Electrical Specifications | |
|---|---|
| Product number | 822143 |
| Nominal voltage | 3.7V |
| Rated capacity | 800mAh |
| Confirmed C-rate | 1C |
| Battery dimension | 8.2mm × 21mm × 43mm |
| Listed internal resistance | 70mΩ |
| Calculated Electrical References | |
| Standard charge current | Approx. 400mA |
| Rapid charge current | Approx. 800mA |
| Standard discharge current | Approx. 160mA |
| Maximum discharge current | Approx. 800mA |
| Calculated energy | Approx. 2.96Wh |
The direct 822143 values are used as the model reference. Current, energy and weight figures are calculated references rather than measured production results. Confirm the final charging profile, discharge demand, protection configuration, connector, tolerances and validation conditions with ZERNE for the finished device.
Product characteristics & advantages
Why Evaluate the 822143 800mAh LiPo Battery?
The 822143 model is positioned around short rectangular geometry rather than capacity alone. It fits compact electronics that value a short battery envelope and a middle-range capacity target. An 800mAh compact rectangular reference with a short 43mm length and 21mm width. The geometry and energy-planning tradeoff are the primary selection focus for this reference model.
The 822143 page focuses on the decision most relevant to this reference: An 800mAh compact rectangular reference with a short 43mm length and 21mm width. Its capacity, geometry, listed resistance and 1C family rate should be evaluated together with the finished device load and enclosure.
800mAh for Short-Pocket Electronics
The 800mAh rated capacity provides a defined basis for comparing runtime, standby intervals and service targets in short-pocket electronics.
21mm × 43mm Battery Footprint
The 8.2mm × 21mm × 43mm envelope gives engineering teams a concrete reference for enclosure clearance, retention, cable exit and component placement.
8.2mm Thickness to Check Early
Review the listed 8.2mm profile with housing tolerances, cushioning and nearby electronics before finalizing the battery pocket.
70mΩ Internal Resistance Reference
The listed 70mΩ resistance can support early voltage-drop discussion for this short rectangular format; validate the finished battery under actual load and temperature conditions.
Battery calculation
Check 822143 Energy and Estimated Runtime
Use the prefilled 822143 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Runtime is an estimate, not guaranteed product performance.
2.96WhEstimated energy
5.33hEstimated runtime
How to Use the Result
The 822143 values are prefilled: 3.7V and 800mAh. Adjust the load power and efficiency to compare different operating scenarios.
- Energy is estimated from nominal voltage and capacity
- Runtime estimate = energy × efficiency ÷ load power
- Actual runtime depends on load profile, cutoff, temperature and system losses
- Use sample testing to validate the final battery and device combination
Use the result as an initial estimate, then discuss charger validation and the final battery specification with ZERNE.
Integration guidance
Plan the 822143 Battery Around the 8.2mm × 21mm × 43mm Envelope
Reserve the stated battery pocket, allow for the 8.2mm thickness, review cable and connector access, and validate the charger, protection and finished load profile before production. The short length can simplify placement, but the 8.2mm thickness needs to be checked against the display, PCB and enclosure wall before finalizing the pocket.
Reserve the 21mm × 43mm Battery Area
Allow space for the pouch cell, enclosure walls, cushioning, retention features, cable exit and service access around the listed footprint.
Check the 8.2mm Profile
Review compression risk, enclosure tolerances and adjacent components around the battery before finalizing the mechanical design.
Confirm Electrical and Protection Requirements
Use the calculated 400mA standard-charge, 800mA rapid-charge, 160mA standard-discharge and 800mA maximum-discharge references for early review, then validate the finished battery assembly.
Applications & solution paths
Applications for the 822143 800mAh LiPo Battery
The 822143 format can be considered for products that match its 8.2mm × 21mm × 43mm envelope and 800mAh energy target. It fits compact electronics that value a short battery envelope and a middle-range capacity target. Final suitability depends on device load, runtime, enclosure, charging and connector requirements.
01Bike Computer GPS
The compact 8.2 mm × 21 mm × 43 mm format can be compared with bike-computer display space, vibration exposure, cable routing and the expected ride interval.
View Bike Computer GPS solutions →
02Portable ECG Monitors
The 800 mAh and calculated energy reference can support early runtime comparisons in portable ECG equipment; confirm load profile, protection and documentation needs.
View Portable ECG Monitors solutions →
03Smart Home Devices
The pouch format can support early review of a connected smart-home enclosure where battery space, wireless standby and service access must be balanced.
View Smart Home Devices solutions →
04IoT Devices
The 800 mAh reference can be compared with sensing, wireless communication, standby time and the available 8.2 mm × 21 mm × 43 mm enclosure space.
View IoT Devices solutions →The 822143 is positioned within ZERNE's 3.7V 500–1000mAh lithium polymer battery range. Ask ZERNE to confirm the final construction, protection, connector, charging limits and validation plan for the required device.
Related technical articles
Technical Guidance for 822143 LiPo Integration
Use these resources to review the energy, geometry, current and safety questions most relevant to a 8.2mm × 21mm × 43mm pouch battery.
Energy DensityWhat Is Energy Density in a Lithium Polymer Battery?
Review how watt-hours, capacity and physical volume work together when the battery must fit a defined enclosure.
Read the technical guide →
SafetyWhy Do LiPo Batteries Explode and How to Prevent It
Review charging, handling, storage and protection considerations before integrating a lithium polymer battery.
Read the technical guide →
C-RatingWhat Is the C Rating of a LiPo Battery and Why It Matters
Relate device current demand to charge, discharge and protection planning before finalizing the battery configuration.
Read the technical guide →OEM battery support
Start the 822143 Battery Inquiry with the Device Power Profile
A complete inquiry can include the required runtime, device load, 8.2mm × 21mm × 43mm battery pocket, charger, connector and documentation needed to evaluate this 800mAh reference format. Share the short-pocket layout, 21mm width, 8.2mm depth and the intended connector exit.
Information to Include in Your Inquiry
Share the product conditions that determine how the 822143 format will fit and perform in the finished device, especially its battery pocket, load and charging window.
- Target runtime and duty cycle
- Voltage, capacity and battery pocket
- 8.2mm depth and enclosure clearance
- Charger and charging conditions
- Operating and storage environment
- Connector, quantity and approval timing
When the Reference Format Is Not Enough
ZERNE can discuss alternate capacity, geometry, protection, connector and assembly requirements when the 822143 specification does not match the finished product.
Discuss a Custom BatteryFAQ
822143 LiPo Battery Questions
Find answers about the 822143 3.7V 800mAh lithium polymer battery, including its dimensions, calculated energy, current references and OEM integration considerations.
What Are the Dimensions of the 822143 LiPo Battery?
The 822143 battery measures 8.2mm in thickness, 21mm in width and 43mm in length.
What Capacity and Energy Does the 822143 Battery Provide?
The listed rated capacity is 800mAh at a nominal voltage of 3.7V. The calculated energy is approximately 2.96Wh before system losses.
What Charge and Discharge Current References Apply to 822143?
The calculated references are approximately 400mA for standard charging, 800mA for rapid charging, 160mA for standard discharge and 800mA for maximum discharge. Confirm the final production limits and test conditions with ZERNE.
What Is the Approximate Weight of the 822143 Battery?
The calculated weight reference is approximately 16g. Final weight can vary with the completed battery configuration and should be confirmed during sampling.
What Internal Resistance Is Listed for the 822143 Battery?
The supplied reference lists internal resistance of 70mΩ. Actual system behavior should be checked under the finished load, temperature and assembly conditions.
How Should the 822143 Format Be Screened During Early Design?
An 800mAh compact rectangular reference with a short 43mm length and 21mm width. Confirm the usable pocket and calculated electrical references before requesting samples.
What Is the Main Advantage of the 822143 Battery Format?
The 822143 provides a 800mAh-class capacity in a 8.2mm × 21mm × 43mm pouch envelope, giving OEM teams a concrete starting point for product-space and energy planning.
Can the 822143 Battery Be Customized?
The 822143 is a reference model. ZERNE can discuss alternate capacity, dimensions, protection, connector and wiring requirements when the listed format does not match the finished product.
What Should Be Confirmed Before Integrating the 822143 Battery?
Review the stated battery area, 8.2mm depth, load profile, charging conditions, protection design, connector, cable exit and enclosure retention with ZERNE.
Lithium polymer battery inquiry
Review the 822143 Battery Fit with ZERNE
Share the application, runtime target, load profile, 8.2mm × 21mm × 43mm battery area, charging conditions and annual demand so ZERNE can recommend the right sample and validation path. Share the short-pocket layout, 21mm width, 8.2mm depth and the intended connector exit.
- Product model and target application
- Required voltage, capacity and runtime
- Battery-pocket dimensions and clearance
- Charger, connector and documentation needs