2.77Wh Calculated Energy for Early Runtime Planning
The confirmed 3.7V nominal voltage and 750mAh rated capacity provide approximately 2.77Wh before system losses, cutoff effects and application-specific derating.
3.7V Lithium Polymer Battery · 500–1000mAh Range
3.7 V 750mAh Lithium Polymer Battery 602058
The 602058 LiPo battery provides a 3.7V nominal platform and 750mAh rated capacity in a 6.0mm × 20mm × 58mm pouch format. A 750mAh mid-length format with a 20mm width and 58mm length for balanced pocket planning.
60205820mm58mm6.0mm
602058750mAh · 3.7V6.0mm × 20mm × 58mm
602058 LiPo BatteryApprox. 2.77Wh calculated energy in a 750mAh-class pouch format
3.7V · 6.0mm × 20mm × 58mm reference visualProduct snapshot
A 750mAh mid-length rectangular reference for compact IoT and monitoring products
The 602058 model is positioned around mid-length rectangular geometry rather than capacity alone. It can support early evaluation of compact IoT, handheld and monitoring products with moderate length available. A 750mAh mid-length format with a 20mm width and 58mm length for balanced pocket planning.
A 20mm × 58mm Mid-Length Rectangular Footprint
The 6.0mm × 20mm × 58mm envelope supports early review of the battery pocket, enclosure depth, cushioning, retention and connector access.
Selection focus for 602058
A 750mAh mid-length format with a 20mm width and 58mm length for balanced pocket planning. The first engineering screen is the 20mm × 58mm plan area, followed by the 6.0mm stack-up and the 750mAh energy target. Compare the 20mm width with the PCB and housing ribs, then review the 6.0mm depth and 58mm length together with connector access. For the device team, It can support early evaluation of compact IoT, handheld and monitoring products with moderate length available. State the required service interval, 20mm × 58mm pocket, 6.0mm stack-up and peak-current profile. This sequence keeps geometry, energy planning and electrical validation in one practical selection path.
3.7V · 750mAhNominal voltage · rated capacity
≈15gCalculated weight reference
≈375 / 750mACharge current · standard / rapid
≈150 / 750mADischarge current · standard / maximum
Current, energy and weight values are calculated references for early planning. Confirm final limits and the finished battery configuration with ZERNE.
Technical data
602058 LiPo Battery Specifications
These specifications summarize the 602058 reference format. A 750mAh mid-length format with a 20mm width and 58mm length for balanced pocket planning. Confirm final construction, protection, connector and validation conditions for the finished OEM battery configuration.
| 602058 Mechanical and Electrical Specifications | |
|---|---|
| Product number | 602058 |
| Nominal voltage | 3.7V |
| Rated capacity | 750mAh |
| Confirmed C-rate | 1C |
| Battery dimension | 6.0mm × 20mm × 58mm |
| Listed internal resistance | 70mΩ |
| Calculated Electrical References | |
| Standard charge current | Approx. 375mA |
| Rapid charge current | Approx. 750mA |
| Standard discharge current | Approx. 150mA |
| Maximum discharge current | Approx. 750mA |
| Calculated energy | Approx. 2.77Wh |
The direct 602058 values are used as the model reference. Current, energy and weight figures are calculated references rather than measured production results. Confirm the final charging profile, discharge demand, protection configuration, connector, tolerances and validation conditions with ZERNE for the finished device.
Product characteristics & advantages
Why Evaluate the 602058 750mAh LiPo Battery?
The 602058 model is positioned around mid-length rectangular geometry rather than capacity alone. It can support early evaluation of compact IoT, handheld and monitoring products with moderate length available. A 750mAh mid-length format with a 20mm width and 58mm length for balanced pocket planning. The geometry and energy-planning tradeoff are the primary selection focus for this reference model.
The 602058 page focuses on the decision most relevant to this reference: A 750mAh mid-length format with a 20mm width and 58mm length for balanced pocket planning. Its capacity, geometry, listed resistance and 1C family rate should be evaluated together with the finished device load and enclosure.
750mAh for Compact Iot And Monitoring Products
The 750mAh rated capacity provides a defined basis for comparing runtime, standby intervals and service targets in compact IoT and monitoring products.
20mm × 58mm Battery Footprint
The 6.0mm × 20mm × 58mm envelope gives engineering teams a concrete reference for enclosure clearance, retention, cable exit and component placement.
6.0mm Thickness to Check Early
Review the listed 6.0mm profile with housing tolerances, cushioning and nearby electronics before finalizing the battery pocket.
70mΩ Internal Resistance Reference
The listed 70mΩ resistance can support early voltage-drop discussion for this mid-length rectangular format; validate the finished battery under actual load and temperature conditions.
Battery calculation
Check 602058 Energy and Estimated Runtime
Use the prefilled 602058 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Runtime is an estimate, not guaranteed product performance.
2.77WhEstimated energy
5.00hEstimated runtime
How to Use the Result
The 602058 values are prefilled: 3.7V and 750mAh. Adjust the load power and efficiency to compare different operating scenarios.
- Energy is estimated from nominal voltage and capacity
- Runtime estimate = energy × efficiency ÷ load power
- Actual runtime depends on load profile, cutoff, temperature and system losses
- Use sample testing to validate the final battery and device combination
Use the result as an initial estimate, then discuss charger validation and the final battery specification with ZERNE.
Integration guidance
Plan the 602058 Battery Around the 6.0mm × 20mm × 58mm Envelope
Reserve the stated battery pocket, allow for the 6.0mm thickness, review cable and connector access, and validate the charger, protection and finished load profile before production. Compare the 20mm width with the PCB and housing ribs, then review the 6.0mm depth and 58mm length together with connector access.
Reserve the 20mm × 58mm Battery Area
Allow space for the pouch cell, enclosure walls, cushioning, retention features, cable exit and service access around the listed footprint.
Check the 6.0mm Profile
Review compression risk, enclosure tolerances and adjacent components around the battery before finalizing the mechanical design.
Confirm Electrical and Protection Requirements
Use the calculated 375mA standard-charge, 750mA rapid-charge, 150mA standard-discharge and 750mA maximum-discharge references for early review, then validate the finished battery assembly.
Applications & solution paths
Applications for the 602058 750mAh LiPo Battery
The 602058 format can be considered for products that match its 6.0mm × 20mm × 58mm envelope and 750mAh energy target. It can support early evaluation of compact IoT, handheld and monitoring products with moderate length available. Final suitability depends on device load, runtime, enclosure, charging and connector requirements.
01Wildlife Research Trackers
The 750 mAh capacity can be compared with long reporting intervals, environmental exposure and the available 6 mm × 20 mm × 58 mm tracker enclosure space.
View Wildlife Research Trackers solutions →
02Pet Feeders
The reference can support early review of connected pet-feeder layouts where motor demand, wireless standby and service access must be balanced.
View Pet Feeders solutions →
03Air Purifiers
The reference can support early review of connected air-purifier layouts where the battery pocket, airflow path and service access must be balanced.
View Air Purifiers solutions →
04Wearable Devices
The 6 mm × 20 mm × 58 mm pouch can be compared with wearable housing space, comfort, sensor placement and cable routing before finalizing the battery.
View Wearable Devices solutions →The 602058 is positioned within ZERNE's 3.7V 500–1000mAh lithium polymer battery range. Ask ZERNE to confirm the final construction, protection, connector, charging limits and validation plan for the required device.
Related technical articles
Technical Guidance for 602058 LiPo Integration
Use these resources to review the energy, geometry, current and safety questions most relevant to a 6.0mm × 20mm × 58mm pouch battery.
C-RatingWhat Is the C Rating of a LiPo Battery and Why It Matters
Relate device current demand to charge, discharge and protection planning before finalizing the battery configuration.
Read the technical guide →
RuntimeHow Long Does a Lithium Polymer Battery Work?
Translate the capacity reference into a realistic runtime discussion using the actual device load and cutoff.
Read the technical guide →
TemperatureHow Temperature Affects the Performance of a LiPo Battery
Keep temperature, resistance, charging limits and the usable energy window in the final validation plan.
Read the technical guide →OEM battery support
Start the 602058 Battery Inquiry with the Device Power Profile
A complete inquiry can include the required runtime, device load, 6.0mm × 20mm × 58mm battery pocket, charger, connector and documentation needed to evaluate this 750mAh reference format. State the required service interval, 20mm × 58mm pocket, 6.0mm stack-up and peak-current profile.
Information to Include in Your Inquiry
Share the product conditions that determine how the 602058 format will fit and perform in the finished device, especially its battery pocket, load and charging window.
- Target runtime and duty cycle
- Voltage, capacity and battery pocket
- 6.0mm depth and enclosure clearance
- Charger and charging conditions
- Operating and storage environment
- Connector, quantity and approval timing
When the Reference Format Is Not Enough
ZERNE can discuss alternate capacity, geometry, protection, connector and assembly requirements when the 602058 specification does not match the finished product.
Discuss a Custom BatteryFAQ
602058 LiPo Battery Questions
Find answers about the 602058 3.7V 750mAh lithium polymer battery, including its dimensions, calculated energy, current references and OEM integration considerations.
What Are the Dimensions of the 602058 LiPo Battery?
The 602058 battery measures 6.0mm in thickness, 20mm in width and 58mm in length.
What Capacity and Energy Does the 602058 Battery Provide?
The listed rated capacity is 750mAh at a nominal voltage of 3.7V. The calculated energy is approximately 2.77Wh before system losses.
What Charge and Discharge Current References Apply to 602058?
The calculated references are approximately 375mA for standard charging, 750mA for rapid charging, 150mA for standard discharge and 750mA for maximum discharge. Confirm the final production limits and test conditions with ZERNE.
What Is the Approximate Weight of the 602058 Battery?
The calculated weight reference is approximately 15g. Final weight can vary with the completed battery configuration and should be confirmed during sampling.
What Internal Resistance Is Listed for the 602058 Battery?
The supplied reference lists internal resistance of 70mΩ. Actual system behavior should be checked under the finished load, temperature and assembly conditions.
How Should the 602058 Format Be Screened During Early Design?
A 750mAh mid-length format with a 20mm width and 58mm length for balanced pocket planning. Confirm the usable pocket and calculated electrical references before requesting samples.
What Is the Main Advantage of the 602058 Battery Format?
The 602058 provides a 750mAh-class capacity in a 6.0mm × 20mm × 58mm pouch envelope, giving OEM teams a concrete starting point for product-space and energy planning.
Can the 602058 Battery Be Customized?
The 602058 is a reference model. ZERNE can discuss alternate capacity, dimensions, protection, connector and wiring requirements when the listed format does not match the finished product.
What Should Be Confirmed Before Integrating the 602058 Battery?
Review the stated battery area, 6.0mm depth, load profile, charging conditions, protection design, connector, cable exit and enclosure retention with ZERNE.
Lithium polymer battery inquiry
Review the 602058 Battery Fit with ZERNE
Share the application, runtime target, load profile, 6.0mm × 20mm × 58mm battery area, charging conditions and annual demand so ZERNE can recommend the right sample and validation path. State the required service interval, 20mm × 58mm pocket, 6.0mm stack-up and peak-current profile.
- Product model and target application
- Required voltage, capacity and runtime
- Battery-pocket dimensions and clearance
- Charger, connector and documentation needs