3.37Wh Calculated Energy for Early Runtime Planning
The confirmed 3.7V nominal voltage and 910mAh rated capacity provide approximately 3.37Wh before system losses, cutoff effects and application-specific derating.
3.7V Lithium Polymer Battery · 500–1000mAh Range
3.7 V 910mAh Lithium Polymer Battery 702547
The 702547 LiPo battery provides a 3.7V nominal platform and 910mAh rated capacity in a 7.0mm × 25mm × 47mm pouch format. A 910mAh mid-width option with a 25mm × 47mm footprint for compact rectangular layouts.
70254725mm47mm7.0mm
702547910mAh · 3.7V7.0mm × 25mm × 47mm
702547 LiPo BatteryApprox. 3.37Wh calculated energy in a 910mAh-class pouch format
3.7V · 7.0mm × 25mm × 47mm reference visualProduct snapshot
A 910mAh mid-width rectangular reference for handheld and medical products
The 702547 model is positioned around mid-width rectangular geometry rather than capacity alone. It can be compared for handheld controls, compact medical devices and IoT equipment with moderate planar area. A 910mAh mid-width option with a 25mm × 47mm footprint for compact rectangular layouts.
A 25mm × 47mm Mid-Width Rectangular Footprint
The 7.0mm × 25mm × 47mm envelope supports early review of the battery pocket, enclosure depth, cushioning, retention and connector access.
Selection focus for 702547
A 910mAh mid-width option with a 25mm × 47mm footprint for compact rectangular layouts. The first engineering screen is the 25mm × 47mm plan area, followed by the 7.0mm stack-up and the 910mAh energy target. The 25mm width creates a different enclosure tradeoff from narrow 20mm formats; review the 47mm length, 7.0mm depth and connector clearance together. For the device team, It can be compared for handheld controls, compact medical devices and IoT equipment with moderate planar area. State the usable 25mm × 47mm area, 7.0mm depth, peak load and expected service interval. This sequence keeps geometry, energy planning and electrical validation in one practical selection path.
3.7V · 910mAhNominal voltage · rated capacity
≈18gCalculated weight reference
≈455 / 910mACharge current · standard / rapid
≈182 / 910mADischarge current · standard / maximum
Current, energy and weight values are calculated references for early planning. Confirm final limits and the finished battery configuration with ZERNE.
Technical data
702547 LiPo Battery Specifications
These specifications summarize the 702547 reference format. A 910mAh mid-width option with a 25mm × 47mm footprint for compact rectangular layouts. Confirm final construction, protection, connector and validation conditions for the finished OEM battery configuration.
| 702547 Mechanical and Electrical Specifications | |
|---|---|
| Product number | 702547 |
| Nominal voltage | 3.7V |
| Rated capacity | 910mAh |
| Confirmed C-rate | 1C |
| Battery dimension | 7.0mm × 25mm × 47mm |
| Listed internal resistance | 70mΩ |
| Calculated Electrical References | |
| Standard charge current | Approx. 455mA |
| Rapid charge current | Approx. 910mA |
| Standard discharge current | Approx. 182mA |
| Maximum discharge current | Approx. 910mA |
| Calculated energy | Approx. 3.37Wh |
The direct 702547 values are used as the model reference. Current, energy and weight figures are calculated references rather than measured production results. Confirm the final charging profile, discharge demand, protection configuration, connector, tolerances and validation conditions with ZERNE for the finished device.
Product characteristics & advantages
Why Evaluate the 702547 910mAh LiPo Battery?
The 702547 model is positioned around mid-width rectangular geometry rather than capacity alone. It can be compared for handheld controls, compact medical devices and IoT equipment with moderate planar area. A 910mAh mid-width option with a 25mm × 47mm footprint for compact rectangular layouts. The geometry and energy-planning tradeoff are the primary selection focus for this reference model.
The 702547 page focuses on the decision most relevant to this reference: A 910mAh mid-width option with a 25mm × 47mm footprint for compact rectangular layouts. Its capacity, geometry, listed resistance and 1C family rate should be evaluated together with the finished device load and enclosure.
910mAh for Handheld And Medical Products
The 910mAh rated capacity provides a defined basis for comparing runtime, standby intervals and service targets in handheld and medical products.
25mm × 47mm Battery Footprint
The 7.0mm × 25mm × 47mm envelope gives engineering teams a concrete reference for enclosure clearance, retention, cable exit and component placement.
7.0mm Thickness to Check Early
Review the listed 7.0mm profile with housing tolerances, cushioning and nearby electronics before finalizing the battery pocket.
70mΩ Internal Resistance Reference
The listed 70mΩ resistance can support early voltage-drop discussion for this mid-width rectangular format; validate the finished battery under actual load and temperature conditions.
Battery calculation
Check 702547 Energy and Estimated Runtime
Use the prefilled 702547 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Runtime is an estimate, not guaranteed product performance.
3.37WhEstimated energy
6.06hEstimated runtime
How to Use the Result
The 702547 values are prefilled: 3.7V and 910mAh. Adjust the load power and efficiency to compare different operating scenarios.
- Energy is estimated from nominal voltage and capacity
- Runtime estimate = energy × efficiency ÷ load power
- Actual runtime depends on load profile, cutoff, temperature and system losses
- Use sample testing to validate the final battery and device combination
Use the result as an initial estimate, then discuss charger validation and the final battery specification with ZERNE.
Integration guidance
Plan the 702547 Battery Around the 7.0mm × 25mm × 47mm Envelope
Reserve the stated battery pocket, allow for the 7.0mm thickness, review cable and connector access, and validate the charger, protection and finished load profile before production. The 25mm width creates a different enclosure tradeoff from narrow 20mm formats; review the 47mm length, 7.0mm depth and connector clearance together.
Reserve the 25mm × 47mm Battery Area
Allow space for the pouch cell, enclosure walls, cushioning, retention features, cable exit and service access around the listed footprint.
Check the 7.0mm Profile
Review compression risk, enclosure tolerances and adjacent components around the battery before finalizing the mechanical design.
Confirm Electrical and Protection Requirements
Use the calculated 455mA standard-charge, 910mA rapid-charge, 182mA standard-discharge and 910mA maximum-discharge references for early review, then validate the finished battery assembly.
Applications & solution paths
Applications for the 702547 910mAh LiPo Battery
The 702547 format can be considered for products that match its 7.0mm × 25mm × 47mm envelope and 910mAh energy target. It can be compared for handheld controls, compact medical devices and IoT equipment with moderate planar area. Final suitability depends on device load, runtime, enclosure, charging and connector requirements.
01Motorcycle GPS
The 910 mAh reference can be assessed against motorcycle-GPS reporting intervals, vibration exposure, connector access and the 7 mm × 25 mm × 47 mm enclosure space.
View Motorcycle GPS solutions →
02VR/AR Devices
The pouch can be compared with headset balance, electronics placement and cable routing while the 910 mAh reference is evaluated against the duty cycle.
View VR/AR Devices solutions →
03Wireless Electronic Thermometers
The compact 7 mm × 25 mm × 47 mm format can support early packaging review for a wireless thermometer; confirm sensing, standby and charging requirements.
View Wireless Electronic Thermometers solutions →
04Vacuum Cleaners
The 910 mAh reference can be used for early runtime and enclosure comparisons in a compact vacuum cleaner; confirm motor load and protection requirements.
View Vacuum Cleaners solutions →The 702547 is positioned within ZERNE's 3.7V 500–1000mAh lithium polymer battery range. Ask ZERNE to confirm the final construction, protection, connector, charging limits and validation plan for the required device.
Related technical articles
Technical Guidance for 702547 LiPo Integration
Use these resources to review the energy, geometry, current and safety questions most relevant to a 7.0mm × 25mm × 47mm pouch battery.
TemperatureHow Temperature Affects the Performance of a LiPo Battery
Keep temperature, resistance, charging limits and the usable energy window in the final validation plan.
Read the technical guide →
Energy DensityWhat Is Energy Density in a Lithium Polymer Battery?
Review how watt-hours, capacity and physical volume work together when the battery must fit a defined enclosure.
Read the technical guide →
RuntimeHow Long Does a Lithium Polymer Battery Work?
Translate the capacity reference into a realistic runtime discussion using the actual device load and cutoff.
Read the technical guide →OEM battery support
Start the 702547 Battery Inquiry with the Device Power Profile
A complete inquiry can include the required runtime, device load, 7.0mm × 25mm × 47mm battery pocket, charger, connector and documentation needed to evaluate this 910mAh reference format. State the usable 25mm × 47mm area, 7.0mm depth, peak load and expected service interval.
Information to Include in Your Inquiry
Share the product conditions that determine how the 702547 format will fit and perform in the finished device, especially its battery pocket, load and charging window.
- Target runtime and duty cycle
- Voltage, capacity and battery pocket
- 7.0mm depth and enclosure clearance
- Charger and charging conditions
- Operating and storage environment
- Connector, quantity and approval timing
When the Reference Format Is Not Enough
ZERNE can discuss alternate capacity, geometry, protection, connector and assembly requirements when the 702547 specification does not match the finished product.
Discuss a Custom BatteryFAQ
702547 LiPo Battery Questions
Find answers about the 702547 3.7V 910mAh lithium polymer battery, including its dimensions, calculated energy, current references and OEM integration considerations.
What Are the Dimensions of the 702547 LiPo Battery?
The 702547 battery measures 7.0mm in thickness, 25mm in width and 47mm in length.
What Capacity and Energy Does the 702547 Battery Provide?
The listed rated capacity is 910mAh at a nominal voltage of 3.7V. The calculated energy is approximately 3.37Wh before system losses.
What Charge and Discharge Current References Apply to 702547?
The calculated references are approximately 455mA for standard charging, 910mA for rapid charging, 182mA for standard discharge and 910mA for maximum discharge. Confirm the final production limits and test conditions with ZERNE.
What Is the Approximate Weight of the 702547 Battery?
The calculated weight reference is approximately 18g. Final weight can vary with the completed battery configuration and should be confirmed during sampling.
What Internal Resistance Is Listed for the 702547 Battery?
The supplied reference lists internal resistance of 70mΩ. Actual system behavior should be checked under the finished load, temperature and assembly conditions.
How Should the 702547 Format Be Screened During Early Design?
A 910mAh mid-width option with a 25mm × 47mm footprint for compact rectangular layouts. Confirm the usable pocket and calculated electrical references before requesting samples.
What Is the Main Advantage of the 702547 Battery Format?
The 702547 provides a 910mAh-class capacity in a 7.0mm × 25mm × 47mm pouch envelope, giving OEM teams a concrete starting point for product-space and energy planning.
Can the 702547 Battery Be Customized?
The 702547 is a reference model. ZERNE can discuss alternate capacity, dimensions, protection, connector and wiring requirements when the listed format does not match the finished product.
What Should Be Confirmed Before Integrating the 702547 Battery?
Review the stated battery area, 7.0mm depth, load profile, charging conditions, protection design, connector, cable exit and enclosure retention with ZERNE.
Lithium polymer battery inquiry
Review the 702547 Battery Fit with ZERNE
Share the application, runtime target, load profile, 7.0mm × 25mm × 47mm battery area, charging conditions and annual demand so ZERNE can recommend the right sample and validation path. State the usable 25mm × 47mm area, 7.0mm depth, peak load and expected service interval.
- Product model and target application
- Required voltage, capacity and runtime
- Battery-pocket dimensions and clearance
- Charger, connector and documentation needs