3.70Wh Calculated Energy for Early Runtime Planning
The confirmed 3.7V nominal voltage and 1000mAh rated capacity provide approximately 3.70Wh before system losses, cutoff effects and application-specific derating.
3.7V Lithium Polymer Battery · 500–1000mAh Range
3.7 V 1000mAh Lithium Polymer Battery 102050
The 102050 LiPo battery provides a 3.7V nominal platform and 1000mAh rated capacity in a 10mm × 20mm × 50mm pouch format. A 1000mAh rectangular reference with a 20mm × 50mm footprint for a defined higher-capacity pocket.
10205020mm50mm10mm
1020501000mAh · 3.7V10mm × 20mm × 50mm
102050 LiPo BatteryApprox. 3.70Wh calculated energy in a 1000mAh-class pouch format
3.7V · 10mm × 20mm × 50mm reference visualProduct snapshot
A 1000mAh upper-range rectangular reference for higher-capacity compact devices
The 102050 model is positioned around upper-range rectangular geometry rather than capacity alone. It can be evaluated for products at the upper end of this category that need a 1000mAh-class energy budget. A 1000mAh rectangular reference with a 20mm × 50mm footprint for a defined higher-capacity pocket.
A 20mm × 50mm Upper-Range Rectangular Footprint
The 10mm × 20mm × 50mm envelope supports early review of the battery pocket, enclosure depth, cushioning, retention and connector access.
Selection focus for 102050
A 1000mAh rectangular reference with a 20mm × 50mm footprint for a defined higher-capacity pocket. The first engineering screen is the 20mm × 50mm plan area, followed by the 10mm stack-up and the 1000mAh energy target. The 50mm length provides a clear mechanical boundary; check the 10mm profile with PCB placement, cushioning and housing clearance before increasing the energy target. For the device team, It can be evaluated for products at the upper end of this category that need a 1000mAh-class energy budget. Provide the 20mm × 50mm pocket, 10mm depth, target runtime and charging conditions. This sequence keeps geometry, energy planning and electrical validation in one practical selection path.
3.7V · 1000mAhNominal voltage · rated capacity
≈20gCalculated weight reference
≈500 / 1000mACharge current · standard / rapid
≈200 / 1000mADischarge current · standard / maximum
Current, energy and weight values are calculated references for early planning. Confirm final limits and the finished battery configuration with ZERNE.
Technical data
102050 LiPo Battery Specifications
These specifications summarize the 102050 reference format. A 1000mAh rectangular reference with a 20mm × 50mm footprint for a defined higher-capacity pocket. Confirm final construction, protection, connector and validation conditions for the finished OEM battery configuration.
| 102050 Mechanical and Electrical Specifications | |
|---|---|
| Product number | 102050 |
| Nominal voltage | 3.7V |
| Rated capacity | 1000mAh |
| Confirmed C-rate | 1C |
| Battery dimension | 10mm × 20mm × 50mm |
| Listed internal resistance | 80mΩ |
| Calculated Electrical References | |
| Standard charge current | Approx. 500mA |
| Rapid charge current | Approx. 1000mA |
| Standard discharge current | Approx. 200mA |
| Maximum discharge current | Approx. 1000mA |
| Calculated energy | Approx. 3.70Wh |
The direct 102050 values are used as the model reference. Current, energy and weight figures are calculated references rather than measured production results. Confirm the final charging profile, discharge demand, protection configuration, connector, tolerances and validation conditions with ZERNE for the finished device.
Product characteristics & advantages
Why Evaluate the 102050 1000mAh LiPo Battery?
The 102050 model is positioned around upper-range rectangular geometry rather than capacity alone. It can be evaluated for products at the upper end of this category that need a 1000mAh-class energy budget. A 1000mAh rectangular reference with a 20mm × 50mm footprint for a defined higher-capacity pocket. The geometry and energy-planning tradeoff are the primary selection focus for this reference model.
The 102050 page focuses on the decision most relevant to this reference: A 1000mAh rectangular reference with a 20mm × 50mm footprint for a defined higher-capacity pocket. Its capacity, geometry, listed resistance and 1C family rate should be evaluated together with the finished device load and enclosure.
1000mAh for Higher-Capacity Compact Devices
The 1000mAh rated capacity provides a defined basis for comparing runtime, standby intervals and service targets in higher-capacity compact devices.
20mm × 50mm Battery Footprint
The 10mm × 20mm × 50mm envelope gives engineering teams a concrete reference for enclosure clearance, retention, cable exit and component placement.
10mm Thickness to Check Early
Review the listed 10mm profile with housing tolerances, cushioning and nearby electronics before finalizing the battery pocket.
80mΩ Internal Resistance Reference
The listed 80mΩ resistance can support early voltage-drop discussion for this upper-range rectangular format; validate the finished battery under actual load and temperature conditions.
Battery calculation
Check 102050 Energy and Estimated Runtime
Use the prefilled 102050 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Runtime is an estimate, not guaranteed product performance.
3.70WhEstimated energy
6.66hEstimated runtime
How to Use the Result
The 102050 values are prefilled: 3.7V and 1000mAh. Adjust the load power and efficiency to compare different operating scenarios.
- Energy is estimated from nominal voltage and capacity
- Runtime estimate = energy × efficiency ÷ load power
- Actual runtime depends on load profile, cutoff, temperature and system losses
- Use sample testing to validate the final battery and device combination
Use the result as an initial estimate, then discuss charger validation and the final battery specification with ZERNE.
Integration guidance
Plan the 102050 Battery Around the 10mm × 20mm × 50mm Envelope
Reserve the stated battery pocket, allow for the 10mm thickness, review cable and connector access, and validate the charger, protection and finished load profile before production. The 50mm length provides a clear mechanical boundary; check the 10mm profile with PCB placement, cushioning and housing clearance before increasing the energy target.
Reserve the 20mm × 50mm Battery Area
Allow space for the pouch cell, enclosure walls, cushioning, retention features, cable exit and service access around the listed footprint.
Check the 10mm Profile
Review compression risk, enclosure tolerances and adjacent components around the battery before finalizing the mechanical design.
Confirm Electrical and Protection Requirements
Use the calculated 500mA standard-charge, 1000mA rapid-charge, 200mA standard-discharge and 1000mA maximum-discharge references for early review, then validate the finished battery assembly.
Applications & solution paths
Applications for the 102050 1000mAh LiPo Battery
The 102050 format can be considered for products that match its 10mm × 20mm × 50mm envelope and 1000mAh energy target. It can be evaluated for products at the upper end of this category that need a 1000mAh-class energy budget. Final suitability depends on device load, runtime, enclosure, charging and connector requirements.
01Container Trackers
The 1000 mAh capacity can be compared with long reporting intervals and the available 10 mm × 20 mm × 50 mm enclosure space in a container-tracking device.
View Container Trackers solutions →
02Body-Worn Cameras
The 10 mm × 20 mm × 50 mm format can be assessed in a body-worn camera housing where camera placement, cable exit and operating time must be balanced.
View Body-Worn Cameras solutions →
03Blood Glucose Monitors
The 1000 mAh reference can support early runtime and portability comparisons in a blood glucose monitor; confirm sensing, charging and protection requirements.
View Blood Glucose Monitors solutions →
04TWS Earphones
The pouch can be compared with earbud or charging-case space, acoustic packaging and the intended listening duty cycle.
View TWS Earphones solutions →The 102050 is positioned within ZERNE's 3.7V 500–1000mAh lithium polymer battery range. Ask ZERNE to confirm the final construction, protection, connector, charging limits and validation plan for the required device.
Related technical articles
Technical Guidance for 102050 LiPo Integration
Use these resources to review the energy, geometry, current and safety questions most relevant to a 10mm × 20mm × 50mm pouch battery.
C-RatingWhat Is the C Rating of a LiPo Battery and Why It Matters
Relate device current demand to charge, discharge and protection planning before finalizing the battery configuration.
Read the technical guide →
RuntimeHow Long Does a Lithium Polymer Battery Work?
Translate the capacity reference into a realistic runtime discussion using the actual device load and cutoff.
Read the technical guide →
SafetyWhy Do LiPo Batteries Explode and How to Prevent It
Review charging, handling, storage and protection considerations before integrating a lithium polymer battery.
Read the technical guide →OEM battery support
Start the 102050 Battery Inquiry with the Device Power Profile
A complete inquiry can include the required runtime, device load, 10mm × 20mm × 50mm battery pocket, charger, connector and documentation needed to evaluate this 1000mAh reference format. Provide the 20mm × 50mm pocket, 10mm depth, target runtime and charging conditions.
Information to Include in Your Inquiry
Share the product conditions that determine how the 102050 format will fit and perform in the finished device, especially its battery pocket, load and charging window.
- Target runtime and duty cycle
- Voltage, capacity and battery pocket
- 10mm depth and enclosure clearance
- Charger and charging conditions
- Operating and storage environment
- Connector, quantity and approval timing
When the Reference Format Is Not Enough
ZERNE can discuss alternate capacity, geometry, protection, connector and assembly requirements when the 102050 specification does not match the finished product.
Discuss a Custom BatteryFAQ
102050 LiPo Battery Questions
Find answers about the 102050 3.7V 1000mAh lithium polymer battery, including its dimensions, calculated energy, current references and OEM integration considerations.
What Are the Dimensions of the 102050 LiPo Battery?
The 102050 battery measures 10mm in thickness, 20mm in width and 50mm in length.
What Capacity and Energy Does the 102050 Battery Provide?
The listed rated capacity is 1000mAh at a nominal voltage of 3.7V. The calculated energy is approximately 3.70Wh before system losses.
What Charge and Discharge Current References Apply to 102050?
The calculated references are approximately 500mA for standard charging, 1000mA for rapid charging, 200mA for standard discharge and 1000mA for maximum discharge. Confirm the final production limits and test conditions with ZERNE.
What Is the Approximate Weight of the 102050 Battery?
The calculated weight reference is approximately 20g. Final weight can vary with the completed battery configuration and should be confirmed during sampling.
What Internal Resistance Is Listed for the 102050 Battery?
The supplied reference lists internal resistance of 80mΩ. Actual system behavior should be checked under the finished load, temperature and assembly conditions.
How Should the 102050 Format Be Screened During Early Design?
A 1000mAh rectangular reference with a 20mm × 50mm footprint for a defined higher-capacity pocket. Confirm the usable pocket and calculated electrical references before requesting samples.
What Is the Main Advantage of the 102050 Battery Format?
The 102050 provides a 1000mAh-class capacity in a 10mm × 20mm × 50mm pouch envelope, giving OEM teams a concrete starting point for product-space and energy planning.
Can the 102050 Battery Be Customized?
The 102050 is a reference model. ZERNE can discuss alternate capacity, dimensions, protection, connector and wiring requirements when the listed format does not match the finished product.
What Should Be Confirmed Before Integrating the 102050 Battery?
Review the stated battery area, 10mm depth, load profile, charging conditions, protection design, connector, cable exit and enclosure retention with ZERNE.
Lithium polymer battery inquiry
Review the 102050 Battery Fit with ZERNE
Share the application, runtime target, load profile, 10mm × 20mm × 50mm battery area, charging conditions and annual demand so ZERNE can recommend the right sample and validation path. Provide the 20mm × 50mm pocket, 10mm depth, target runtime and charging conditions.
- Product model and target application
- Required voltage, capacity and runtime
- Battery-pocket dimensions and clearance
- Charger, connector and documentation needs