3.70Wh calculated energy for practical runtime planning
Using the nominal voltage and minimum rated capacity, the battery provides approximately 3.70Wh before system losses. The typical capacity is listed as 1010mAh.
3.7V Lithium Polymer Battery · 1000–2000mAh Range
3.7 V 1000mAh Lithium Polymer Battery 552855
The 552855 lipo battery provides a 1000mAh minimum rated capacity, 3.7V nominal voltage and a 5.5mm × 28mm × 55mm pouch format. With a 1S1P configuration, PCM protection, a specified 500mA maximum charge current and 1000mA discharge current, it gives OEM teams a clear starting point for compact device power planning.
552855 LiPo Battery3.70Wh calculated energy in a compact 1S1P pouch format
3.7V · 5.5mmProduct snapshot
A compact 1000mAh battery for everyday OEM electronics
The 552855 LiPo battery combines a 1000mAh minimum rated capacity with a 5.5mm × 28mm × 55mm pouch envelope, 1S1P configuration and PCM protection. It sits at the entry point of ZERNE's 3.7V 1000–2000mAh battery range.
Protection and configuration for integration review
The specified 1S1P configuration and PCM protection give engineering teams a clear starting point for enclosure, charging and protection-system discussions.
3.7VNominal voltage
≈3.70WhCalculated energy
5.5mmBattery thickness
20gApproximate weight
Technical data
552855 battery specifications
The following data summarizes the supplied 552855 specification in a ZERNE technical format. Calculated energy is derived from the nominal voltage and minimum rated capacity.
| Product Configuration | |
|---|---|
| Product number | 552855 |
| Cell configuration | 1S1P |
| Lithium battery PCM | Yes |
| NTC | No |
| Approximate battery weight | Approx. 20g |
| Mechanical and Capacity Data | |
| Battery dimension | 5.5mm × 28mm × 55mm |
| Minimum rated capacity | 1000mAh min. |
| Typical capacity | 1010mAh typ. |
| Calculated energy | Approx. 3.70Wh (3.7V × 1000mAh ÷ 1000) |
| Electrical and Protection Data | |
| Nominal voltage | 3.7V |
| Operating voltage range | 2.75V to 4.20V |
| Maximum charge voltage | 4.2V ±50mV |
| Maximum charge current | 500mA |
| Discharge current | 1000mA |
| Discharge cut-off voltage | 2.75V |
| Internal impedance | <200mΩ |
| Service Life Reference | |
| Cycle-life reference | 500 cycles ≥80% (0.5C/0.5C, 23±5°C) |
The 552855 values above are the supplied product specifications. The energy figure is calculated from the minimum rated capacity. Confirm the approved production configuration, connector, charging profile, protection limits and validation conditions with ZERNE for the finished device.
Product characteristics & advantages
Why evaluate the 552855 1000mAh LiPo battery?
The 552855 model balances a compact 5.5mm profile, a 1000mAh minimum capacity, built-in PCM protection and a defined 1S1P configuration for OEM electronics that need a documented starting point.
The 552855 lithium polymer battery is suited to early design evaluation where the team needs more than a capacity number. The 5.5mm × 28mm × 55mm pouch envelope supports mechanical stack-up discussions, while the approximate 20g weight helps with preliminary device-mass planning. The specified 500mA maximum charge current, 1000mA discharge current, 2.75V cut-off and 4.20V operating ceiling give the charger, power-path and protection reviews clear boundaries. Its 500-cycle reference is stated for a defined 0.5C/0.5C test condition at 23±5°C; actual service life depends on the final system and operating profile.
1000mAh minimum for compact runtime planning
The minimum rated capacity and approximately 3.70Wh calculated energy provide a consistent baseline for estimating device runtime and service intervals.
5.5mm × 28mm × 55mm pouch format
The listed dimensions help teams reserve the battery pocket, review cushioning and check clearance around the enclosure and cable exit.
PCM-equipped 1S1P configuration
The supplied specification lists PCM as present and the cell arrangement as 1S1P. Confirm the approved protection behavior for the final assembly.
500mA maximum charge current reference
The specified maximum charge current gives charger-selection work a defined reference. Validate the actual charging profile and limits before production.
500-cycle reference under stated test conditions
The listed cycle-life result applies to the stated 0.5C/0.5C, 23±5°C test condition and should not be treated as a universal field-life guarantee.
Battery calculation
Check 552855 capacity, energy and estimated runtime
Use the prefilled 552855 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo battery capacity calculator
Energy is calculated from nominal voltage and minimum rated capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Runtime and charge time are estimates, not guaranteed product performance.
3.70WhEstimated energy
6.66hEstimated runtime
2.00hIdeal charge time
How to use the result
The 552855 values are prefilled: 3.7V, 1000mAh minimum rated capacity and the specified 500mA maximum charge current. Adjust the load power and efficiency to compare different operating scenarios.
- Energy = voltage × capacity ÷ 1000
- Runtime estimate = energy × efficiency ÷ load power
- Ideal charge time = capacity ÷ charge current
- Actual runtime depends on load profile, cut-off, temperature and system losses
Use the result as an initial estimate, then discuss sample testing, charger validation and the final battery specification with ZERNE.
Integration guidance
Plan the 552855 battery around its compact pouch envelope
The 552855 battery should be evaluated as part of the finished device: reserve the 28mm × 55mm footprint, allow for the 5.5mm depth, match the specified charge current and review PCM, connector and enclosure integration.
Reserve the 28mm × 55mm battery area
Allow space for the pouch cell, enclosure walls, cushioning, retention features, cable exit and service access around the compact footprint.
Match the charge and discharge references
Use the 500mA maximum charge current and 1000mA discharge current as starting points for charger and power-path review, then validate the final assembly.
Review PCM and cut-off behavior
The supplied specification lists PCM, a 2.75V discharge cut-off and a 2.75V to 4.20V operating range. Confirm system-level protection coordination with ZERNE.
Applications & solution paths
Applications for the 552855 1000mAh LiPo battery
The 552855 format can be considered for products that need a compact 1000mAh-class battery, a 5.5mm profile and a defined PCM-equipped 1S1P configuration. Final suitability depends on load profile, enclosure, charging and connector requirements.
01GPS Card Batteries
The compact 5.5 mm × 28 mm × 55 mm format can be reviewed against card-style tracker packaging, antenna clearance and the required reporting interval.
View GPS Card Batteries solutions →
02Bluetooth Headsets
The pouch can be assessed against headset comfort, speaker placement and cable routing while the 1000 mAh reference is checked against the duty cycle.
View Bluetooth Headsets solutions →
03Blood Pressure Monitors
The 1000 mAh reference can support early runtime comparisons in a portable blood-pressure monitor; confirm load profile, charging and protection needs.
View Blood Pressure Monitors solutions →
04Pet Trackers
The compact 5.5 mm × 28 mm × 55 mm pouch format can be reviewed against collar or tag packaging, wireless reporting intervals and service access.
View Pet Trackers solutions →The 552855 is positioned within ZERNE's 3.7V 1000–2000mAh lithium polymer battery range. Ask ZERNE to confirm the final construction, protection, connector, charging limits and validation plan for the required device.
Related technical articles
Technical guidance for 1000mAh LiPo integration
Use these resources to review energy planning, current demand and safe operation when a 552855 pouch battery is considered for an OEM device.
Energy DensityWhat Is Energy Density in a Lithium Polymer Battery?
Review how watt-hours, capacity and physical volume work together when the battery must fit a defined enclosure.
Read the technical guide →
C-RatingWhat Is the C Rating of a LiPo Battery and Why It Matters
Relate device current demand to charge, discharge and protection planning before finalizing the battery configuration.
Read the technical guide →
SafetyWhy Do LiPo Batteries Explode and How to Prevent It
Review charging, handling, storage and protection considerations before integrating a lithium polymer battery.
Read the technical guide →OEM battery support
Start the 552855 inquiry with the device power profile
A complete inquiry can include the required runtime, device load, 28mm × 55mm battery pocket, 5.5mm depth, PCM coordination, charger and documentation needed to evaluate this 1000mAh-class cell.
Information to include in your inquiry
Share the product conditions that determine how the 552855 model will perform in the finished device, especially its battery pocket, load and charging window.
- Target runtime and duty cycle
- Voltage, capacity and battery pocket
- Device clearance and cable exit
- Charger and charging conditions
- Operating and storage environment
- Connector, quantity and approval timing
When the standard format is not enough
ZERNE can discuss alternate capacity, geometry, protection, connector and assembly requirements when the 552855 specification does not match the finished product.
Discuss a Custom BatteryFAQ
552855 battery questions
Find answers about the 552855 3.7V 1000mAh lithium polymer battery, including its 5.5mm profile, 1S1P configuration, PCM protection, charging reference and capacity range.
What are the dimensions of the 552855 LiPo battery?
The 552855 battery measures 5.5mm in thickness, 28mm in width and 55mm in length.
What capacity and energy does the 552855 battery provide?
The supplied specification lists 1000mAh minimum rated capacity and 1010mAh typical capacity at a nominal voltage of 3.7V. The calculated energy based on minimum capacity is approximately 3.70Wh.
Does the 552855 battery include PCM protection?
Yes. The supplied specification lists lithium battery PCM as present. Confirm the approved protection behavior and system-level coordination for the final battery assembly.
What charging current is specified for the 552855 battery?
The specified maximum charge current is 500mA. Confirm the charger profile, termination conditions and production configuration with ZERNE.
What are the 552855 battery voltage limits?
The supplied specification lists a 2.75V to 4.20V operating voltage range, a 4.2V ±50mV maximum charge voltage and a 2.75V discharge cut-off voltage.
What should be checked before integrating the 552855 battery?
Review the 28mm × 55mm battery area, 5.5mm depth, PCM coordination, charge current, discharge load, cable exit, connector and enclosure retention with ZERNE.
Lithium polymer battery inquiry
Review the 552855 battery fit with ZERNE
Share the application, runtime target, load profile, 28mm × 55mm battery area, 5.5mm depth, PCM requirements, charging conditions and annual demand so ZERNE can recommend the right sample and validation path.
- Product model and target application
- Required voltage, capacity and runtime
- Device clearance and battery-pocket dimensions
- Charger, connector and documentation needs