4.26Wh Calculated Energy for a Defined Power Budget
Based on the confirmed 3.7V nominal platform and 1150mAh rated capacity, the 103232 provides approximately 4.26Wh before system losses and application-specific derating.
3.7V Lithium Polymer Battery · 1000–2000mAh Range
3.7V 1150mAh Lithium Polymer Battery 103232
The 103232 LiPo battery provides a 3.7V platform, 1150mAh rated capacity and an compact 10mm × 32mm × 32mm pouch format. Its square footprint can be evaluated for OEM devices that need a defined battery pocket with a defined 1150mAh-class energy budget.
103232 LiPo BatteryApprox. 4.26Wh calculated energy in an compact 1150mAh-class pouch format
3.7V · 10mmProduct snapshot
Key 103232 Selection Data
The 103232 LiPo battery combines a 3.7V platform, 1150mAh rated capacity and a 10mm × 32mm × 32mm square pouch format. These references help OEM teams assess defined enclosure fit, energy planning and early electrical requirements.
An Ultra-Thin 32mm × 32mm Battery Footprint
The 10mm × 32mm × 32mm envelope gives teams a concrete starting point for 10mm profile and enclosure planning, cushioning, retention and cable routing. Confirm final compression and protection requirements for the completed battery configuration.
3.7V · 1150mAhNominal voltage · rated capacity
≈23gCalculated weight reference
≈575mA / 1150mACharge current · standard / rapid
≈230mA / 1150mADischarge current · standard / maximum
Current values are calculated references for early planning. Confirm final charging, discharge, protection and validation limits for the finished configuration.
Technical data
103232 LiPo Battery Specifications
These specifications summarize the 103232 reference format. Calculated energy, current and weight values are presented as approximate references for early product planning.
| 103232 Mechanical and Electrical Specifications | |
|---|---|
| Product number | 103232 |
| Nominal voltage | 3.7V |
| Rated capacity | 1150mAh |
| Battery dimension | 10mm × 32mm × 32mm |
| Approximate battery weight | Approx. 23g |
| Calculated Electrical References | |
| Standard charge current | Approx. 575mA |
| Rapid charge current | Approx. 1150mA |
| Standard discharge current | Approx. 230mA |
| Maximum discharge current | Approx. 1150mA |
| Calculated energy | Approx. 4.26Wh |
The direct 103232 values are used as the model reference. Current, energy and weight figures are calculated references rather than measured production results. Confirm the final charging profile, discharge demand, protection configuration, connector, tolerances and validation conditions with ZERNE for the finished device.
Product characteristics & advantages
Why Evaluate the 103232 1150mAh LiPo Battery?
The 103232 model is defined by its defined 10mm profile, square 32mm × 32mm footprint and 1150mAh energy target, giving OEM teams a focused reference for depth-limited product designs.
The 103232 lithium polymer battery brings together a thin pouch envelope and a moderate energy budget for compact products where enclosure depth and battery-pocket geometry matter. Its confirmed dimensions support early mechanical review, while the calculated electrical references help teams begin charger, load and protection discussions without treating the reference format as a fixed standard SKU.
1150mAh for a Defined Power Budget
The rated capacity provides a clear starting point for comparing runtime targets, standby intervals and power budgets in compact rechargeable products.
10mm Depth for Space-Constrained Enclosures
The listed thickness can help OEM teams review depth-limited housings, layered assemblies and clearance around adjacent components.
32mm × 32mm for Compact Battery Pockets
The square envelope provides a concrete reference for retention features, cushioning, cable exit and PCB placement during early mechanical design.
Approximately 23g for Early Weight Planning
The calculated weight reference helps teams compare the battery with a device mass budget. Confirm final production weight after configuration and validation.
A Reference Format That Can Be Adapted
When the listed capacity or square envelope does not match the finished product, ZERNE can discuss alternate dimensions, protection, wiring and connector requirements.
Battery calculation
Check 103232 Energy and Estimated Runtime
Use the prefilled 103232 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Runtime is an estimate, not guaranteed product performance.
4.26WhEstimated energy
7.66hEstimated runtime
How to Use the Result
The 103232 values are prefilled: 3.7V and 1150mAh. Adjust the load power and efficiency to compare different operating scenarios.
- Energy is estimated from nominal voltage and capacity
- Runtime estimate = energy × efficiency ÷ load power
- Actual runtime depends on load profile, cut-off, temperature and system losses
- Use sample testing to validate the final battery and device combination
Use the result as an initial estimate, then discuss charger validation and the final battery specification with ZERNE.
Integration guidance
Plan the 103232 Battery Around a Shallow Square Pocket
The 103232 battery should be evaluated as part of the finished device: reserve the 32mm × 32mm footprint, allow for the 10mm depth, use the calculated current references for early power-path planning and confirm the final protection, connector and enclosure requirements.
Reserve the 32mm × 32mm Battery Area
Allow space for the square pouch cell, enclosure walls, cushioning, retention features, cable exit and service access around the listed footprint.
Check the 10mm Profile in the Stack-Up
Review compression risk, enclosure tolerances and adjacent components around the listed battery before finalizing the mechanical design.
Confirm Electrical and Protection Requirements
Use the calculated 575mA standard-charge, 1150mA rapid-charge, 230mA standard-discharge and 1150mA maximum-discharge references for early review, then validate the finished battery assembly.
Applications & solution paths
Applications for the 103232 1150mAh LiPo Battery
The 103232 format can be considered for compact products that need a defined square battery pocket and a defined 1150mAh energy target. Final suitability depends on device load, runtime, enclosure, charging and connector requirements.
01Personal Trackers
The 1150 mAh capacity can be compared with location-reporting intervals, wearable comfort and the available 10 mm × 32 mm × 32 mm enclosure space.
View Personal Trackers solutions →
02Blood Glucose Monitors
The 1150 mAh reference can support early runtime and portability comparisons in a blood glucose monitor; confirm sensing, charging and protection requirements.
View Blood Glucose Monitors solutions →
03Wi-Fi Routers
The 1150 mAh reference can be compared with standby, wireless communication and enclosure requirements in a compact Wi-Fi router.
View Wi-Fi Routers solutions →
04VR/AR Devices
The pouch can be compared with headset balance, electronics placement and cable routing while the 1150 mAh reference is evaluated against the duty cycle.
View VR/AR Devices solutions →The 103232 is positioned within ZERNE's 3.7V 1000–2000mAh lithium polymer battery range. Ask ZERNE to confirm the final construction, protection, connector, charging limits and validation plan for the required device.
Related technical articles
Technical Guidance for 103232 LiPo Integration
Use these resources to review energy planning, current demand and safe operation when a thin square pouch battery is considered for an OEM device.
C-RatingWhat Is the C Rating of a LiPo Battery and Why It Matters
Relate device current demand to charge, discharge and protection planning before finalizing the battery configuration.
Read the technical guide →
TemperatureHow Temperature Affects the Performance of a LiPo Battery
Keep temperature, resistance, charging limits and the usable energy window in the final validation plan.
Read the technical guide →
Energy DensityWhat Is Energy Density in a Lithium Polymer Battery?
Review how watt-hours, capacity and physical volume work together when the battery must fit a defined enclosure.
Read the technical guide →OEM battery support
Start the 103232 Battery Inquiry with the Device Power Profile
A complete inquiry can include the required runtime, device load, 10mm × 32mm × 32mm battery pocket, charger, connector and documentation needed to evaluate this 1150mAh reference format.
Information to Include in Your Inquiry
Share the product conditions that determine how the 103232 format will fit and perform in the finished device, especially its defined battery pocket, load and charging window.
- Target runtime and duty cycle
- Voltage, capacity and battery pocket
- 10mm depth and enclosure clearance
- Charger and charging conditions
- Operating and storage environment
- Connector, quantity and approval timing
When the Reference Format Is Not Enough
ZERNE can discuss alternate capacity, geometry, protection, connector and assembly requirements when the 103232 specification does not match the finished product.
Discuss a Custom BatteryFAQ
103232 LiPo Battery Questions
Find answers about the 103232 3.7V 1150mAh lithium polymer battery, including its thin square dimensions, calculated energy, current references and OEM integration considerations.
What Are the Dimensions of the 103232 LiPo Battery?
The 103232 battery measures 10mm in thickness, 32mm in width and 32mm in length.
What Capacity and Energy Does the 103232 Battery Provide?
The listed rated capacity is 1150mAh at a nominal voltage of 3.7V. The calculated energy is approximately 4.26Wh before system losses.
What Charge and Discharge Current References Apply to 103232?
The calculated references are approximately 575mA for standard charging, 1150mA for rapid charging, 230mA for standard discharge and 1150mA for maximum discharge. Confirm the final production limits and test conditions with ZERNE.
What Is the Approximate Weight of the 103232 Battery?
The calculated weight reference is approximately 23g. Final weight can vary with the completed battery configuration and should be confirmed during sampling.
What Is the Main Advantage of the 103232 Battery Format?
The 103232 provides an 1150mAh-class capacity in a 10mm × 32mm × 32mm square pouch envelope, giving OEM teams a starting point for compact product designs.
Can the 103232 Battery Be Customized?
The 103232 is a reference model. ZERNE can discuss alternate capacity, dimensions, protection, connector and wiring requirements when the listed format does not match the finished product.
What Should Be Confirmed Before Integrating the 103232 Battery?
Review the 32mm × 32mm battery area, 10mm depth, load profile, charging conditions, protection design, connector, cable exit and enclosure retention with ZERNE.
Is the 103232 Suitable for Every 1150mAh Device?
No. Final suitability depends on the device's load, runtime target, enclosure, charging method, protection requirements and operating conditions. Use the listed values as a starting point for project evaluation.
Lithium polymer battery inquiry
Review the 103232 Battery Fit with ZERNE
Share the application, runtime target, load profile, 32mm × 32mm battery area, 10mm depth, charging conditions and annual demand so ZERNE can recommend the right sample and validation path.
- Product model and target application
- Required voltage, capacity and runtime
- Square battery-pocket dimensions and clearance
- Charger, connector and documentation needs