4.995Wh Calculated Energy for a Moderate Capacity Step
Based on the confirmed 3.7V platform and 1350mAh rated capacity, the 103542 provides approximately 5.00Wh before system losses and application-specific derating.
3.7V Lithium Polymer Battery · 1000–2000mAh Range
3.7 V 1350mAh Lithium Polymer Battery 103542
The 103542 LiPo battery provides a 3.7V platform, 1350mAh rated capacity and a 10mm × 35mm × 42mm pouch format. It gives OEM teams a defined step up from compact 1200mAh-class references while keeping the battery footprint relatively controlled.
103542 LiPo BatteryApprox. 5.00Wh calculated energy in a 1350mAh-class pouch format
3.7V · 10mm × 35mm × 42mmProduct snapshot
A compact 1350mAh step-up for broader rectangular battery pockets
The 103542 format is useful when a project needs more capacity than a compact 1200mAh reference but still has a defined rectangular battery pocket. A controlled capacity step with a 35mm × 42mm footprint for products that can offer slightly more planar area than a compact 30mm × 40mm reference.
A Controlled 35mm × 42mm Battery Footprint
The 10mm × 35mm × 42mm envelope gives teams a clear basis for reviewing width, length, depth and surrounding component clearance.
3.7V · 1350mAhNominal voltage · rated capacity
≈27gCalculated weight reference
≈675 / 1350mACharge current · standard / rapid
≈270 / 1350mADischarge current · standard / maximum
Current, energy and weight values are calculated references for early planning. Confirm final limits and the finished battery configuration with ZERNE.
Technical data
103542 LiPo Battery Specifications
These specifications summarize the 103542 reference format. A controlled capacity step with a 35mm × 42mm footprint for products that can offer slightly more planar area than a compact 30mm × 40mm reference. Confirm final construction, protection, connector and validation conditions for the finished OEM battery configuration.
| 103542 Mechanical and Electrical Specifications | |
|---|---|
| Product number | 103542 |
| Nominal voltage | 3.7V |
| Rated capacity | 1350mAh |
| Confirmed C-rate | 1C |
| Battery dimension | 10mm × 35mm × 42mm |
| Calculated Electrical References | |
| Standard charge current | Approx. 675mA |
| Rapid charge current | Approx. 1350mA |
| Standard discharge current | Approx. 270mA |
| Maximum discharge current | Approx. 1350mA |
| Calculated energy | Approx. 5.00Wh |
The direct 103542 values are used as the model reference. Current, energy and weight figures are calculated references rather than measured production results. Confirm the final charging profile, discharge demand, protection configuration, connector, tolerances and validation conditions with ZERNE for the finished device.
Product characteristics & advantages
Why Evaluate the 103542 1350mAh LiPo Battery?
The 103542 format is useful when a project needs more capacity than a compact 1200mAh reference but still has a defined rectangular battery pocket. A controlled capacity step with a 35mm × 42mm footprint for products that can offer slightly more planar area than a compact 30mm × 40mm reference. The geometry and energy-planning tradeoff are the primary selection focus for this reference model.
The 103542 sits between compact 1200mAh references and larger 1800mAh formats. Its value for early engineering work is the combination of a modest capacity increase and a still-manageable rectangular envelope.
1350mAh for a Larger Energy Budget
The rated capacity supports a more substantial runtime or standby target than smaller 1000–1200mAh references.
35mm × 42mm for Layout Review
The defined footprint helps teams compare pocket width, length and component clearance during mechanical planning.
10mm Profile to Check Early
Review the 10mm thickness in the enclosure stack, including cushioning, housing tolerances and cable exit.
A Starting Point for OEM Adaptation
ZERNE can evaluate alternate capacity, dimensions, protection and connector requirements around the device power profile.
Battery calculation
Check 103542 Energy and Estimated Runtime
Use the prefilled 103542 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Runtime is an estimate, not guaranteed product performance.
5.00WhEstimated energy
8.99hEstimated runtime
How to Use the Result
The 103542 values are prefilled: 3.7V and 1350mAh. Adjust the load power and efficiency to compare different operating scenarios.
- Energy is estimated from nominal voltage and capacity
- Runtime estimate = energy × efficiency ÷ load power
- Actual runtime depends on load profile, cutoff, temperature and system losses
- Use sample testing to validate the final battery and device combination
Use the result as an initial estimate, then discuss charger validation and the final battery specification with ZERNE.
Integration guidance
Plan the 103542 Battery Around the 10mm × 35mm × 42mm Envelope
Reserve the stated battery pocket, allow for the 10mm thickness, review cable and connector access, and validate the charger, protection and finished load profile before production. Confirm the extra width and length before increasing capacity, then review the 10mm thickness, cable exit, foam clearance and retention together.
Reserve the 35mm × 42mm Battery Area
Allow space for the pouch cell, enclosure walls, cushioning, retention features, cable exit and service access around the listed footprint.
Check the 10mm Profile
Review compression risk, enclosure tolerances and adjacent components around the battery before finalizing the mechanical design.
Confirm Electrical and Protection Requirements
Use the calculated 675mA standard-charge, 1350mA rapid-charge, 270mA standard-discharge and 1350mA maximum-discharge references for early review, then validate the finished battery assembly.
Applications & solution paths
Applications for the 103542 1350mAh LiPo Battery
The 103542 format can be considered for products that match its 10mm × 35mm × 42mm envelope and 1350mAh energy target. Useful for compact instruments and connected products that need a 1350mAh-class target without moving to a much longer battery channel. Final suitability depends on device load, runtime, enclosure, charging and connector requirements.
01GPS Card Batteries
The compact 10 mm × 35 mm × 42 mm format can be reviewed against card-style tracker packaging, antenna clearance and the required reporting interval.
View GPS Card Batteries solutions →
02Bluetooth Headsets
The pouch can be assessed against headset comfort, speaker placement and cable routing while the 1350 mAh reference is checked against the duty cycle.
View Bluetooth Headsets solutions →
03Wildlife Research Trackers
The 1350 mAh capacity can be compared with long reporting intervals, environmental exposure and the available 10 mm × 35 mm × 42 mm tracker enclosure space.
View Wildlife Research Trackers solutions →
04IoT Devices
The 1350 mAh reference can be compared with sensing, wireless communication, standby time and the available 10 mm × 35 mm × 42 mm enclosure space.
View IoT Devices solutions →The 103542 is positioned within ZERNE's 3.7V 1000–2000mAh lithium polymer battery range. Ask ZERNE to confirm the final construction, protection, connector, charging limits and validation plan for the required device.
Related technical articles
Technical Guidance for 103542 LiPo Integration
Use these resources to review the energy, geometry, current and safety questions most relevant to a 10mm × 35mm × 42mm pouch battery.
SafetyWhy Do LiPo Batteries Explode and How to Prevent It
Review charging, handling, storage and protection considerations before integrating a lithium polymer battery.
Read the technical guide →
RuntimeHow Long Does a Lithium Polymer Battery Work?
Translate the capacity reference into a realistic runtime discussion using the actual device load and cutoff.
Read the technical guide →
TemperatureHow Temperature Affects the Performance of a LiPo Battery
Keep temperature, resistance, charging limits and the usable energy window in the final validation plan.
Read the technical guide →OEM battery support
Start the 103542 Battery Inquiry with the Device Power Profile
A complete inquiry can include the required runtime, device load, 10mm × 35mm × 42mm battery pocket, charger, connector and documentation needed to evaluate this 1350mAh reference format. Share available width and length, the 10mm depth limit, connector location and the runtime target behind the capacity step.
Information to Include in Your Inquiry
Share the product conditions that determine how the 103542 format will fit and perform in the finished device, especially its battery pocket, load and charging window.
- Target runtime and duty cycle
- Voltage, capacity and battery pocket
- 10mm depth and enclosure clearance
- Charger and charging conditions
- Operating and storage environment
- Connector, quantity and approval timing
When the Reference Format Is Not Enough
ZERNE can discuss alternate capacity, geometry, protection, connector and assembly requirements when the 103542 specification does not match the finished product.
Discuss a Custom BatteryFAQ
103542 LiPo Battery Questions
Find answers about the 103542 3.7V 1350mAh lithium polymer battery, including its dimensions, calculated energy, current references and OEM integration considerations.
What Are the Dimensions of the 103542 LiPo Battery?
The 103542 battery measures 10mm in thickness, 35mm in width and 42mm in length.
What Capacity and Energy Does the 103542 Battery Provide?
The listed rated capacity is 1350mAh at a nominal voltage of 3.7V. The calculated energy is approximately 5.00Wh before system losses.
What Charge and Discharge Current References Apply to 103542?
The calculated references are approximately 675mA for standard charging, 1350mA for rapid charging, 270mA for standard discharge and 1350mA for maximum discharge. Confirm the final production limits and test conditions with ZERNE.
What Is the Approximate Weight of the 103542 Battery?
The calculated weight reference is approximately 27g. Final weight can vary with the completed battery configuration and should be confirmed during sampling.
How Should the 103542 Format Be Screened During Early Design?
A controlled capacity step with a 35mm × 42mm footprint for products that can offer slightly more planar area than a compact 30mm × 40mm reference. Confirm the usable pocket and calculated electrical references before requesting samples.
What Is the Main Advantage of the 103542 Battery Format?
The 103542 provides a 1350mAh-class capacity in a 10mm × 35mm × 42mm pouch envelope, giving OEM teams a concrete starting point for product-space and energy planning.
Can the 103542 Battery Be Customized?
The 103542 is a reference model. ZERNE can discuss alternate capacity, dimensions, protection, connector and wiring requirements when the listed format does not match the finished product.
What Should Be Confirmed Before Integrating the 103542 Battery?
Review the stated battery area, 10mm depth, load profile, charging conditions, protection design, connector, cable exit and enclosure retention with ZERNE.
Lithium polymer battery inquiry
Review the 103542 Battery Fit with ZERNE
Share the application, runtime target, load profile, 10mm × 35mm × 42mm battery area, charging conditions and annual demand so ZERNE can recommend the right sample and validation path. Share available width and length, the 10mm depth limit, connector location and the runtime target behind the capacity step.
- Product model and target application
- Required voltage, capacity and runtime
- Battery-pocket dimensions and clearance
- Charger, connector and documentation needs