6.66Wh Calculated Energy for Extended Operating Intervals
The 3.7V nominal platform and 1800mAh rated capacity provide approximately 6.66Wh before system losses, cutoff effects and application-specific derating.
3.7V Lithium Polymer Battery · 1000–2000mAh Range
3.7 V 1800mAh Lithium Polymer Battery 103450
The 103450 LiPo battery combines a 3.7V nominal platform and 1800mAh rated capacity with a 10mm × 34mm × 50mm pouch format. Its 50mm length gives OEM teams a defined path to a higher energy budget without moving immediately to a much wider battery pocket.
103450 LiPo BatteryApprox. 6.66Wh calculated energy in a 1800mAh-class pouch format
3.7V · 10mm × 34mm × 50mmProduct snapshot
A compact 1800mAh energy reserve in a 50mm-long format
The 103450 is an energy-reserve reference for devices that can accommodate a 50mm-long battery area and need more capacity than the 1200–1500mAh range. A 50mm-long 1800mAh reference that increases energy while keeping the listed width at 34mm.
A 34mm × 50mm Long-Rectangular Footprint
The 10mm × 34mm × 50mm envelope supports early review of length, enclosure depth, cable exit and retention in compact equipment.
3.7V · 1800mAhNominal voltage · rated capacity
≈36gCalculated weight reference
≈900 / 1800mACharge current · standard / rapid
≈360 / 1800mADischarge current · standard / maximum
Current, energy and weight values are calculated references for early planning. Confirm final limits and the finished battery configuration with ZERNE.
Technical data
103450 LiPo Battery Specifications
These specifications summarize the 103450 reference format. A 50mm-long 1800mAh reference that increases energy while keeping the listed width at 34mm. Confirm final construction, protection, connector and validation conditions for the finished OEM battery configuration.
| 103450 Mechanical and Electrical Specifications | |
|---|---|
| Product number | 103450 |
| Nominal voltage | 3.7V |
| Rated capacity | 1800mAh |
| Confirmed C-rate | 1C |
| Battery dimension | 10mm × 34mm × 50mm |
| Calculated Electrical References | |
| Standard charge current | Approx. 900mA |
| Rapid charge current | Approx. 1800mA |
| Standard discharge current | Approx. 360mA |
| Maximum discharge current | Approx. 1800mA |
| Calculated energy | Approx. 6.66Wh |
The direct 103450 values are used as the model reference. Current, energy and weight figures are calculated references rather than measured production results. Confirm the final charging profile, discharge demand, protection configuration, connector, tolerances and validation conditions with ZERNE for the finished device.
Product characteristics & advantages
Why Evaluate the 103450 1800mAh LiPo Battery?
The 103450 is an energy-reserve reference for devices that can accommodate a 50mm-long battery area and need more capacity than the 1200–1500mAh range. A 50mm-long 1800mAh reference that increases energy while keeping the listed width at 34mm. The geometry and energy-planning tradeoff are the primary selection focus for this reference model.
The 103450 emphasizes a practical balance between higher capacity and a contained rectangular footprint. It can help teams compare energy reserve against the available 50mm battery pocket before moving to a larger format.
1800mAh for Longer Operating Intervals
The rated capacity supports early comparison of runtime, reporting interval and service requirements.
34mm × 50mm for Defined Pockets
The length and width provide a measurable reference for enclosure planning and component clearance.
10mm Thickness in the Product Stack
Review the 10mm profile with compression, cushioning and adjacent PCB or structural parts.
Adapt the Energy-Geometry Balance
ZERNE can discuss alternate dimensions, protection and connectors when the 103450 reference does not match the finished design.
Battery calculation
Check 103450 Energy and Estimated Runtime
Use the prefilled 103450 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Runtime is an estimate, not guaranteed product performance.
6.66WhEstimated energy
11.99hEstimated runtime
How to Use the Result
The 103450 values are prefilled: 3.7V and 1800mAh. Adjust the load power and efficiency to compare different operating scenarios.
- Energy is estimated from nominal voltage and capacity
- Runtime estimate = energy × efficiency ÷ load power
- Actual runtime depends on load profile, cutoff, temperature and system losses
- Use sample testing to validate the final battery and device combination
Use the result as an initial estimate, then discuss charger validation and the final battery specification with ZERNE.
Integration guidance
Plan the 103450 Battery Around the 10mm × 34mm × 50mm Envelope
Reserve the stated battery pocket, allow for the 10mm thickness, review cable and connector access, and validate the charger, protection and finished load profile before production. Treat the 50mm length as the first checkpoint. Verify the cell can sit without bending or edge compression, then review 34mm width, 10mm depth and connector route.
Reserve the 34mm × 50mm Battery Area
Allow space for the pouch cell, enclosure walls, cushioning, retention features, cable exit and service access around the listed footprint.
Check the 10mm Profile
Review compression risk, enclosure tolerances and adjacent components around the battery before finalizing the mechanical design.
Confirm Electrical and Protection Requirements
Use the calculated 900mA standard-charge, 1800mA rapid-charge, 360mA standard-discharge and 1800mA maximum-discharge references for early review, then validate the finished battery assembly.
Applications & solution paths
Applications for the 103450 1800mAh LiPo Battery
The 103450 format can be considered for products that match its 10mm × 34mm × 50mm envelope and 1800mAh energy target. Relevant to products that can reserve a defined long-rectangular pocket and value higher energy over the smallest possible footprint. Final suitability depends on device load, runtime, enclosure, charging and connector requirements.
01Personal Trackers
The 1800 mAh capacity can be compared with location-reporting intervals, wearable comfort and the available 10 mm × 34 mm × 50 mm enclosure space.
View Personal Trackers solutions →
02Barcode Scanners
The format can be assessed beside the scan engine, trigger, display and grip structure in a handheld barcode-scanner enclosure.
View Barcode Scanners solutions →
03Smart Home Devices
The pouch format can support early review of a connected smart-home enclosure where battery space, wireless standby and service access must be balanced.
View Smart Home Devices solutions →
04Portable Printers
The 10 mm × 34 mm × 50 mm envelope can be checked against paper path, motor load, control placement and service access in a portable printer.
View Portable Printers solutions →The 103450 is positioned within ZERNE's 3.7V 1000–2000mAh lithium polymer battery range. Ask ZERNE to confirm the final construction, protection, connector, charging limits and validation plan for the required device.
Related technical articles
Technical Guidance for 103450 LiPo Integration
Use these resources to review the energy, geometry, current and safety questions most relevant to a 10mm × 34mm × 50mm pouch battery.
RuntimeHow Long Does a Lithium Polymer Battery Work?
Translate the capacity reference into a realistic runtime discussion using the actual device load and cutoff.
Read the technical guide →
Energy DensityWhat Is Energy Density in a Lithium Polymer Battery?
Review how watt-hours, capacity and physical volume work together when the battery must fit a defined enclosure.
Read the technical guide →
C-RatingWhat Is the C Rating of a LiPo Battery and Why It Matters
Relate device current demand to charge, discharge and protection planning before finalizing the battery configuration.
Read the technical guide →OEM battery support
Start the 103450 Battery Inquiry with the Device Power Profile
A complete inquiry can include the required runtime, device load, 10mm × 34mm × 50mm battery pocket, charger, connector and documentation needed to evaluate this 1800mAh reference format. Provide the 50mm length, 34mm width, 10mm depth, peak load and reporting interval so the energy reserve can be assessed realistically.
Information to Include in Your Inquiry
Share the product conditions that determine how the 103450 format will fit and perform in the finished device, especially its battery pocket, load and charging window.
- Target runtime and duty cycle
- Voltage, capacity and battery pocket
- 10mm depth and enclosure clearance
- Charger and charging conditions
- Operating and storage environment
- Connector, quantity and approval timing
When the Reference Format Is Not Enough
ZERNE can discuss alternate capacity, geometry, protection, connector and assembly requirements when the 103450 specification does not match the finished product.
Discuss a Custom BatteryFAQ
103450 LiPo Battery Questions
Find answers about the 103450 3.7V 1800mAh lithium polymer battery, including its dimensions, calculated energy, current references and OEM integration considerations.
What Are the Dimensions of the 103450 LiPo Battery?
The 103450 battery measures 10mm in thickness, 34mm in width and 50mm in length.
What Capacity and Energy Does the 103450 Battery Provide?
The listed rated capacity is 1800mAh at a nominal voltage of 3.7V. The calculated energy is approximately 6.66Wh before system losses.
What Charge and Discharge Current References Apply to 103450?
The calculated references are approximately 900mA for standard charging, 1800mA for rapid charging, 360mA for standard discharge and 1800mA for maximum discharge. Confirm the final production limits and test conditions with ZERNE.
What Is the Approximate Weight of the 103450 Battery?
The calculated weight reference is approximately 36g. Final weight can vary with the completed battery configuration and should be confirmed during sampling.
How Should the 103450 Format Be Screened During Early Design?
A 50mm-long 1800mAh reference that increases energy while keeping the listed width at 34mm. Confirm the usable pocket and calculated electrical references before requesting samples.
What Is the Main Advantage of the 103450 Battery Format?
The 103450 provides a 1800mAh-class capacity in a 10mm × 34mm × 50mm pouch envelope, giving OEM teams a concrete starting point for product-space and energy planning.
Can the 103450 Battery Be Customized?
The 103450 is a reference model. ZERNE can discuss alternate capacity, dimensions, protection, connector and wiring requirements when the listed format does not match the finished product.
What Should Be Confirmed Before Integrating the 103450 Battery?
Review the stated battery area, 10mm depth, load profile, charging conditions, protection design, connector, cable exit and enclosure retention with ZERNE.
Lithium polymer battery inquiry
Review the 103450 Battery Fit with ZERNE
Share the application, runtime target, load profile, 10mm × 34mm × 50mm battery area, charging conditions and annual demand so ZERNE can recommend the right sample and validation path. Provide the 50mm length, 34mm width, 10mm depth, peak load and reporting interval so the energy reserve can be assessed realistically.
- Product model and target application
- Required voltage, capacity and runtime
- Battery-pocket dimensions and clearance
- Charger, connector and documentation needs