3.03Wh Calculated Energy for a Defined Power Budget
Based on the 3.7V nominal platform and 820mAh rated capacity, the 102534 provides approximately 3.03Wh before system losses and application-specific derating.
3.7V Lithium Polymer Battery · 500–1000mAh Range
3.7 V 820mAh Lithium Polymer Battery 102534
The 102534 LiPo battery is a 3.7V, 820mAh pouch-cell reference with a 10mm × 25mm × 34mm envelope and approximately 3.03Wh of calculated energy. Its short rectangular footprint gives OEM teams a practical starting point for comparing battery-pocket fit, runtime planning and connection access before the final configuration is confirmed.
820mAh Compact LiPo ReferenceOfficial ZERNE battery image with ZN-102634 product marking
3.7V · 820mAhProduct Snapshot
Key 102534 LiPo Battery Selection Data
The 102534 LiPo battery combines a 3.7V platform, 820mAh rated capacity and a 10mm × 25mm × 34mm rectangular pouch format. These references help you assess enclosure fit, energy planning and the early electrical requirements of a compact OEM product.
A Compact 25mm × 34mm Footprint with 10mm Depth
The 10mm × 25mm × 34mm envelope gives you a concrete starting point for battery-pocket planning, cushioning, retention and cable routing. Confirm final compression and protection requirements for the completed battery configuration.
3.7V · 820mAhNominal voltage · rated capacity
≈16.4gCalculated weight reference
≈410mA / 820mACharge current · standard / rapid
≈164mA / 820mADischarge current · standard / maximum
Current values are calculated references for early planning. Confirm final charging, discharge, protection and validation limits for the finished configuration.
Technical Data
102534 LiPo Battery Specifications
These specifications summarize the 102534 reference format. Calculated energy, current and weight values are presented as approximate references for product planning.
| 102534 Mechanical and Electrical Specifications | |
|---|---|
| Product Number | 102534 |
| Nominal Voltage | 3.7V |
| Rated Capacity | 820mAh |
| Battery Dimension | 10mm × 25mm × 34mm |
| Approximate Battery Weight | Approx. 16.4g |
| Calculated Electrical References | |
| Standard Charge Current | Approx. 410mA |
| Rapid Charge Current | Approx. 820mA |
| Standard Discharge Current | Approx. 164mA |
| Maximum Discharge Current | Approx. 820mA |
| Calculated Energy | Approx. 3.03Wh |
The direct 102534 values are used as the model reference. Current, energy and weight figures are calculated references rather than measured production results. The current references use 0.5C standard charge, 1.0C rapid charge, 0.2C standard discharge and 1.0C maximum discharge assumptions. Confirm the final charging profile, discharge demand, protection configuration, connector, tolerances and validation conditions with ZERNE for the finished device.
Product Characteristics & Advantages
Why Evaluate the 102534 820mAh LiPo Battery?
The 102534 model combines a 10mm profile, 25mm × 34mm rectangular footprint and 820mAh energy target, giving you a focused reference for compact product designs.
The 102534 lithium polymer battery brings together a compact pouch envelope and a defined energy budget for products where enclosure depth and battery-pocket geometry matter. Its listed dimensions support mechanical planning, while the calculated electrical references help you begin charger, load and protection discussions without treating this reference format as a fixed standard SKU.
820mAh for a Defined Power Budget
The rated capacity provides a clear starting point for comparing runtime targets, standby intervals and power budgets in compact rechargeable products.
10mm Depth for Space-Constrained Enclosures
The listed thickness can help you review depth-limited housings, layered assemblies and clearance around adjacent components.
25mm × 34mm for Compact Battery Pockets
The rectangular envelope provides a concrete reference for retention features, cushioning, cable exit and PCB placement during mechanical design.
Approximately 3.03Wh for Runtime Planning
The calculated energy value helps you compare the battery with load demand, duty cycle and target operating time before sample validation.
A Reference Format That Can Be Adapted
When the listed capacity or rectangular envelope does not match your finished product, ZERNE can discuss alternate dimensions, protection, wiring and connector requirements.
Battery Calculation
Check 102534 Energy and Estimated Runtime
Use the prefilled 102534 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
410mA is the calculated 0.5C family reference for 820mAh.
3.03WhEstimated Energy
5.46hEstimated Runtime
2.00hIdeal Charge Time
How to Use the Result
The 102534 values are prefilled: 3.7V and 820mAh. Adjust the load power and efficiency to compare different operating scenarios. The charge-time field starts with the calculated 0.5C reference of approximately 410mA; use approximately 820mA when reviewing the 1.0C rapid-charge reference.
- Energy is estimated from nominal voltage and capacity
- Runtime estimate = energy × efficiency ÷ load power
- Ideal charge time = capacity ÷ entered charge current
- Actual runtime depends on load profile, cutoff, temperature and system losses
Use the result as an initial estimate, then discuss charger validation and the final battery specification with ZERNE.
Integration Guidance
Plan the 102534 Battery Around a Compact Rectangular Pocket
The 102534 battery should be evaluated as part of your finished device: reserve the 25mm × 34mm footprint, allow for the 10mm depth, use the calculated current references for early power-path planning and confirm the final protection, connector and enclosure requirements.
Reserve the 25mm × 34mm Battery Area
Allow space for the rectangular pouch cell, enclosure walls, cushioning, retention features, cable exit and service access around the listed footprint.
Check the 10mm Profile in the Stack-Up
Review compression risk, enclosure tolerances and adjacent components around the listed battery before finalizing the mechanical design.
Match Energy to the Real Load
Approximately 3.03Wh supports early runtime comparison, but radio bursts, motors, displays, sensing intervals and cutoff settings can change the usable operating window. Review continuous and peak demand together.
Confirm Electrical and Protection Requirements
Use the calculated 410mA standard-charge, 820mA rapid-charge, 164mA standard-discharge and 820mA maximum-discharge references for early review, then validate the finished battery assembly.
Use the listed dimensions as a starting point for your product. Confirm the finished battery drawing, tolerance, protection, connector and test conditions with ZERNE before production release.
Applications & Solutions
Applications for the 102534 820mAh LiPo Battery
The 102534 format can be considered for compact products that need a defined rectangular battery pocket and an 820mAh energy target. Final suitability depends on device load, runtime, enclosure, charging and connector requirements.
01GPS Tracking
The 820 mAh capacity can be compared with reporting intervals, standby time and communication bursts in compact tracking devices. Review the 10 mm × 25 mm × 34 mm envelope, connector access and required service interval.
View GPS Tracking solutions →
02POS Machines
The 10 mm × 25 mm × 34 mm plan area can be assessed in a POS terminal where display, scanner, controls and enclosure clearance influence the battery pocket.
View POS Machines solutions →
03Bluetooth Headsets
The pouch can be assessed against headset comfort, speaker placement and cable routing while the 820 mAh reference is checked against the duty cycle.
View Bluetooth Headsets solutions →
04Sensors
The 820 mAh and 10 mm × 25 mm × 34 mm reference can be compared with sensing, wireless communication, standby time and enclosure constraints.
View Sensors solutions →The 102534 is positioned within ZERNE's 3.7V 500–1000mAh lithium polymer battery range. Ask ZERNE to confirm the final construction, protection, connector, charging limits and validation plan for your device.
Related Technical Articles
Technical Guidance for 102534 LiPo Integration
Use these resources to review energy planning, current demand, temperature effects and safe integration when a compact rectangular pouch battery is considered for an OEM device.
C-RatingWhat Is the C Rating of a LiPo Battery and Why It Matters
Relate device current demand to charge, discharge and protection planning before finalizing the battery configuration.
Read the technical guide →
TemperatureHow Temperature Affects the Performance of a LiPo Battery
Keep temperature, resistance, charging limits and the usable energy window in the final validation plan.
Read the technical guide →
Energy DensityWhat Is Energy Density in a Lithium Polymer Battery?
Review how watt-hours, capacity and physical volume work together when the battery must fit a defined enclosure.
Read the technical guide →
SafetyWhy Do LiPo Batteries Explode and How to Prevent It
Review charging, handling, storage and protection considerations before integrating a lithium polymer battery.
Read the technical guide →OEM Battery Support
Start the 102534 Battery Inquiry with the Device Power Profile
A complete inquiry can include the required runtime, device load, 10mm × 25mm × 34mm battery pocket, charger, connector and documentation needed to evaluate this 820mAh reference format.
Information to Include in Your Inquiry
Share the product conditions that determine how the 102534 format will fit and perform in your finished device, especially its battery pocket, load and charging window.
- Target runtime and duty cycle
- Voltage, capacity and battery pocket
- 10mm depth and enclosure clearance
- Charger and charging conditions
- Operating and storage environment
- Connector, quantity and approval timing
When the Reference Format Is Not Enough
ZERNE can discuss alternate capacity, geometry, protection, connector and assembly requirements when the 102534 specification does not match your finished product.
Discuss a Custom BatteryFAQ
102534 LiPo Battery Questions
Find answers about the 102534 3.7V 820mAh lithium polymer battery, including its compact rectangular dimensions, calculated energy, current references and OEM integration considerations.
What Are the Dimensions of the 102534 LiPo Battery?
The 102534 battery measures 10mm in thickness, 25mm in width and 34mm in length.
What Capacity and Energy Does the 102534 Battery Provide?
The listed rated capacity is 820mAh at a nominal voltage of 3.7V. The calculated energy is approximately 3.03Wh before system losses.
What Charge and Discharge Current References Apply to 102534?
The calculated references are approximately 410mA for standard charging, 820mA for rapid charging, 164mA for standard discharge and 820mA for maximum discharge. Confirm the final production limits and test conditions with ZERNE.
What Is the Approximate Weight of the 102534 Battery?
The calculated weight reference is approximately 16.4g. Final weight can vary with the completed battery configuration and should be confirmed during sampling.
What Is the Main Advantage of the 102534 Battery Format?
The 102534 provides an 820mAh-class capacity in a 10mm × 25mm × 34mm rectangular pouch envelope, giving OEM teams a starting point for compact product designs.
Can the 102534 Battery Be Customized?
The 102534 is a reference model. ZERNE can discuss alternate capacity, dimensions, protection, connector and wiring requirements when the listed format does not match the finished product.
What Should Be Confirmed Before Integrating the 102534 Battery?
Review the 25mm × 34mm battery area, 10mm depth, load profile, charging conditions, protection design, connector, cable exit and enclosure retention with ZERNE.
Is the 102534 Suitable for Every 820mAh Device?
No. Final suitability depends on the device's load, runtime target, enclosure, charging method, protection requirements and operating conditions. Use the listed values as a starting point for project evaluation.
Lithium Polymer Battery Inquiry
Review the 102534 Battery Fit with ZERNE
Share the application, runtime target, load profile, 25mm × 34mm battery area, 10mm depth, charging conditions and annual demand so ZERNE can recommend the right sample and validation path.
- Product model and target application
- Required voltage, capacity and runtime
- Battery-pocket dimensions and clearance
- Charger, connector and documentation needs