3.33Wh Calculated Energy for Longer Duty Cycles
This 3.7 V lithium polymer battery provides a starting point for runtime planning in trackers, sensors, portable instruments and other products with regular operating or communication periods.
3.7 V Curved Lithium Polymer Battery
3.7 V 900mAh Lithium Polymer Battery 6015100
The 6015100 lipo battery combines 3.7 V nominal voltage, 900mAh capacity, a 6.0 mm × 15 mm × 100 mm pouch envelope, a 1C charging rate and 160mΩ internal resistance. Its long, narrow format provides approximately 3.33Wh of calculated energy for curved or space-constrained electronic products that can accommodate a linear battery pocket.
601510015 × 100 mm6.0 mm profile
900mAh LiPo6015100 reference format
6015100 Curved LiPo BatteryNeutral reference visual for long narrow curved-device battery channel
3.7 V · 3.33 WhProduct snapshot
A 900mAh LiPo Format for Linear Battery-Pocket Integration
The 6015100 LiPo battery combines 900mAh capacity with a 6.0 mm × 15 mm × 100 mm pouch envelope. Its long narrow footprint gives product teams a defined linear battery reference when the enclosure provides length but limited width. See the curved lithium polymer battery range when comparing nearby formats.
100 mm Length for a Dedicated Narrow Channel
The listed 6.0 mm thickness, 15 mm width and 100 mm length help engineering teams review linear battery-pocket fit, retention, cable routing and service clearance.
3.7 VNominal voltage
≈3.33WhCalculated energy
6.0 mmBattery thickness
100 mmBattery length
Technical data
6015100 Battery Specifications
The 6015100 lipo battery combines a 3.7 V nominal voltage, 900mAh capacity, 1C charge rate and 6.0 mm × 15 mm × 100 mm dimensions for extended-runtime electronics and curved-battery integration evaluation.
| 6015100 Mechanical and Electrical Specifications | |
|---|---|
| Product number | 6015100 |
| Nominal voltage | 3.7 V |
| Rated capacity | 900mAh |
| Charge rate | 1C |
| Battery dimensions | 6.0 mm × 15 mm × 100 mm |
| Internal resistance | 160mΩ |
| Calculated Electrical References | |
| Standard charge current | Approx. 450mA |
| Rapid charge current | Approx. 900mA |
| Standard discharge current | Approx. 180mA |
| Maximum discharge current | Approx. 900mA |
| Calculated energy | Approx. 3.33Wh |
The 6015100 lithium polymer battery is listed at 3.7 V, 900mAh, 1C charging, 6.0 mm × 15 mm × 100 mm and 160mΩ internal resistance. Confirm charging, discharge, protection, connector and curved-device integration information for your intended product and operating conditions.
Product characteristics & advantages
Why Evaluate the 6015100 900mAh Curved LiPo Battery?
The 6015100 model brings together a 3.33Wh calculated energy budget, 6.0 mm profile, 15 mm × 100 mm footprint, 900mAh capacity and 160mΩ internal resistance. Its main design value is extended energy storage in a long narrow battery format.
The 6015100 lithium polymer battery is intended for OEM teams that need more energy than a compact short cell can provide and can reserve a dedicated linear battery channel. Its approximately 3.33Wh calculated energy supports early comparisons of longer reporting intervals, regular sensing and repeated communication cycles. The 15 mm × 100 mm footprint provides a long-format packaging reference, while the 6.0 mm thickness helps define the enclosure-depth conversation. The listed 1C charge rate and 160mΩ internal resistance provide starting points for charger matching and voltage-drop evaluation. Confirm the final battery construction, connector, protection design and curved-device requirements.
900mAh for Longer Operating Plans
The 900mAh capacity and approximately 3.33Wh calculated energy help compare longer reporting intervals, more frequent sensing and reduced service frequency in selected OEM devices.
15 mm × 100 mm Area for Linear Battery Channels
The long narrow footprint provides a defined reference for products with available length but limited width. Review retention, cable exit and service access.
6.0 mm Thickness for a Controlled Stack-Up
The 6.0 mm profile helps establish available depth around the pouch cell. Include cushioning, protection components and adjacent parts in the enclosure review.
160mΩ for Voltage-Drop Evaluation
The listed internal resistance provides an initial reference for load discussions. Test the finished battery configuration under the intended operating conditions.
Curved Battery Category for Elongated Product Concepts
6015100 is included in ZERNE's curved lithium polymer battery range. Confirm the suitable construction, assembly method, protection and final device integration requirements.
Battery calculation
Check Capacity, Energy and Estimated Runtime
Use the prefilled 6015100 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Runtime and charge time are estimates, not guaranteed product performance.
3.33WhEstimated energy
5.99hEstimated runtime
1.00hIdeal charge time
How to Use the Result
The 6015100 values are prefilled: 3.7 V, 900mAh and an approximate 900mA current derived from the listed 1C charge rate. Adjust the load power and efficiency to compare different operating scenarios.
- Use the displayed energy reference for an initial runtime comparison.
- Compare the estimate with measured device load and system efficiency.
- Review charger settings and protection limits for the finished configuration.
- Temperature, resistance growth and cutoff conditions affect actual performance.
Use the result as an initial estimate, then discuss sample testing, charger validation and the final battery specification with ZERNE.
Integration guidance
Plan the 6015100 Battery Around a Long Narrow Channel
The 6015100 battery should be evaluated as part of the finished device: reserve the 15 mm × 100 mm footprint, allow for the 6.0 mm depth, match the 1C charge rate and review the construction requirements for the curved product design.
Reserve the 15 mm × 100 mm Battery Area
Allow space for the pouch cell, enclosure walls, cushioning, retention features, cable exit and service access along the long battery channel.
Integrate the 6.0 mm Profile Into the Enclosure
Check enclosure depth, compression risk and adjacent components around the long pouch cell before finalizing the mechanical stack-up.
Confirm the Final Elongated-Device Construction
Discuss the required form factor, bend or contour conditions, protection, connector exit and assembly method with ZERNE before freezing the product enclosure.
Applications & Solutions
Applications for the 6015100 900mAh Curved LiPo Battery
The 6015100 format is best evaluated against application-specific pocket geometry, energy demand and device shape rather than a generic category. These three paths reflect its 6.0 mm × 15 mm × 100 mm envelope and 900mAh capacity.
01Container Tracking Devices
The 6.0 mm × 15 mm × 100 mm long channel can be evaluated for tracking equipment where extended reporting intervals, antenna placement and service access drive the battery layout.
Explore Container Tracking Devices →
02Bar-Code Scanners
The 100 mm length can be compared with industrial scanner or terminal housings that provide a linear battery route, balanced grip clearance and controlled cable routing.
Explore Bar-Code Scanners →
03Smart Watches and Wearables
The 3.33Wh reference is intended as a geometry comparison for larger connected wearables only when the long pouch, retention and thermal path can be accommodated.
Explore Smart Watches and Wearables →These application paths are starting points for OEM evaluation. Final suitability depends on actual load, runtime, temperature, protection, connector and assembly requirements.
READY FOR A FIT REVIEW?
Request a Technical Review →Confirm the 6015100 Battery Fit
Share the finished-device pocket, load profile and temperature conditions to receive a focused recommendation for this 900mAh format.
Related Technical Articles
Technical Guidance for Selecting a 900mAh Curved LiPo Battery
Use these resources to connect the 6015100 geometry and energy target with temperature effects, current demand, energy planning and safe operation.
Temperature PlanningHow Temperature Affects the Performance of a LiPo Battery
Understand how temperature changes capacity, resistance, charging and usable LiPo battery performance in the finished device.
Read the Temperature Guide →
Current DemandWhat Is the C Rating of a LiPo Battery and Why It Matters
Review how current demand and C-rating concepts affect peak-load discussions, startup behavior and battery selection.
Read the C-Rating Guide →
Energy PlanningWhat Is Energy Density in a Lithium Polymer Battery?
Relate the 3.33Wh reference to the 6.0 mm × 15 mm × 100 mm envelope when comparing runtime planning, usable volume and the final battery pocket.
Read the Energy-Density Guide →LiPoSAFE
DESIGNCharging · protection · heat
Protection PlanningDESIGNCharging · protection · heat
Why Do LiPo Batteries Explode and How to Prevent It
Review charging, handling, storage and protection considerations before integrating a lithium polymer battery near heat sources.
Read the LiPo Safety Guide →OEM curved battery support
Start the 6015100 Inquiry with the Linear Battery Channel
A complete inquiry can include the required runtime, device load, 15 mm × 100 mm battery pocket, 6.0 mm depth, device shape, charger and documentation needed to evaluate this 900mAh curved cell.
Information to Include in Your Inquiry
Share the product conditions that determine how the 6015100 model will perform in the finished device, especially its long battery channel, runtime target, load and charging window.
- Target runtime and duty cycle
- Voltage, capacity and battery pocket
- Device shape and available clearance
- Charger and charging conditions
- Operating and storage environment
- Connector, quantity and approval timing
When a Standard Format Is Not Enough
ZERNE can discuss alternate curved-battery capacity, geometry, protection, connector and assembly requirements when the 6015100 specification does not match the finished product.
Discuss a Custom BatteryFAQ
6015100 Curved Battery Questions
Find answers about the 6015100 3.7 V 900mAh lithium polymer battery, including its 6.0 mm profile, 15 mm × 100 mm footprint, 1C charge rate, 160mΩ internal resistance and curved-device design considerations.
What Are the Dimensions of the 6015100 LiPo Battery?
The 6015100 battery measures 6.0 mm in thickness, 15 mm in width and 100 mm in length.
How Much Capacity and Energy Does the 6015100 Battery Provide?
The rated capacity is 900mAh at a nominal voltage of 3.7 V. Its calculated energy is approximately 3.33Wh before system losses.
What Charging Rate Is Listed for the 6015100 Battery?
The 6015100 battery has a listed 1C charging rate. Confirm the charging current, charging conditions and protection limits for your configuration.
What Is the Internal Resistance of the 6015100 Battery?
The listed internal resistance is 160mΩ. Resistance can vary with temperature, state of charge, test method and production tolerance, so voltage stability can be assessed under the intended device load.
Is the 6015100 Battery Suitable for Curved Devices?
6015100 is included in ZERNE's curved lithium polymer battery range. Confirm the suitable construction, assembly method, protection, connector and final device integration requirements.
What Should Be Checked Before Integrating the 6015100 Battery?
Review the 15 mm × 100 mm battery area, 6.0 mm depth, device shape, retention, cable exit, protection design, charger, peak load and connector requirements with ZERNE.
Curved battery inquiry
Review the 6015100 Battery Fit with ZERNE
Share the application, runtime target, load profile, 15 mm × 100 mm battery area, 6.0 mm depth, device shape, charging conditions and annual demand so ZERNE can recommend the right sample and validation path.
- Product model and target application
- Required voltage, capacity and runtime
- Device contour and battery-pocket dimensions
- Charger, connector and documentation needs