1.04Wh Calculated Energy for Compact Duty Cycles
This 3.7 V lithium polymer battery provides a useful starting point for runtime planning in small sensors, wearables, compact trackers and intermittent communication devices.
3.7 V Curved Lithium Polymer Battery
3.7 V 280mAh Lithium Polymer Battery 701238
The 701238 lipo battery combines 3.7 V nominal voltage, 280mAh capacity, a 7.0 mm × 12 mm × 38 mm pouch envelope, a 1C charging rate and 120mΩ internal resistance. Its compact format provides approximately 1.04Wh of calculated energy for curved or space-constrained electronic products that need more reserve than a micro-capacity cell.
70123812 × 38 mm7.0 mm profile
280mAh LiPo701238 reference format
701238 Curved LiPo BatteryNeutral reference visual for compact moderate-capacity curved format
3.7 V · 1.04 WhProduct snapshot
A 280mAh LiPo Format for Compact Capacity Planning
The 701238 LiPo battery combines 280mAh capacity with a 7.0 mm × 12 mm × 38 mm pouch envelope. It gives product teams a compact step up from very small cells while keeping the battery pocket relatively short. See the curved lithium polymer battery range when comparing nearby formats.
Short 38 mm Length for Small Enclosure Layouts
The listed 7.0 mm thickness, 12 mm width and 38 mm length help engineering teams review battery-pocket fit, retention, cable routing and available clearance around a compact cell.
3.7 VNominal voltage
≈1.04WhCalculated energy
7.0 mmBattery thickness
38 mmBattery length
Technical data
701238 Battery Specifications
The 701238 lipo battery combines a 3.7 V nominal voltage, 280mAh capacity, 1C charge rate and 7.0 mm × 12 mm × 38 mm dimensions for compact electronics and curved-battery integration evaluation.
| 701238 Mechanical and Electrical Specifications | |
|---|---|
| Product number | 701238 |
| Nominal voltage | 3.7 V |
| Rated capacity | 280mAh |
| Charge rate | 1C |
| Battery dimensions | 7.0 mm × 12 mm × 38 mm |
| Internal resistance | 120mΩ |
| Calculated Electrical References | |
| Standard charge current | Approx. 140mA |
| Rapid charge current | Approx. 280mA |
| Standard discharge current | Approx. 56mA |
| Maximum discharge current | Approx. 280mA |
| Calculated energy | Approx. 1.04Wh |
The 701238 lithium polymer battery is listed at 3.7 V, 280mAh, 1C charging, 7.0 mm × 12 mm × 38 mm and 120mΩ internal resistance. Confirm charging, discharge, protection, connector and curved-device integration information for your intended product and operating conditions.
Product characteristics & advantages
Why Evaluate the 701238 280mAh Curved LiPo Battery?
The 701238 model brings together a 1.04Wh calculated energy budget, 7.0 mm profile, 12 mm × 38 mm footprint, 280mAh capacity and 120mΩ internal resistance. Its main design value is a balanced compact format for applications that need more energy than a micro cell without moving to a long battery strip.
The 701238 lithium polymer battery is intended for OEM teams that need a compact but useful energy reserve within a small enclosure. Its approximately 1.04Wh calculated energy supports early comparisons of sensor activity, intermittent wireless communication and short-to-moderate operating cycles. The 12 mm × 38 mm footprint keeps the battery pocket relatively compact, while the 7.0 mm thickness defines the enclosure-depth discussion. The listed 1C charge rate and 120mΩ internal resistance provide starting points for charger matching and voltage-drop evaluation. Confirm the final battery construction, connector, protection design and curved-device requirements.
280mAh for Compact Runtime Planning
The 280mAh capacity and approximately 1.04Wh calculated energy provide more reserve than micro-capacity formats while keeping the product footprint suitable for smaller OEM devices.
12 mm × 38 mm Area for Small Battery Pockets
The compact footprint supports early mechanical comparisons for small devices. Review retention, cable exit, enclosure tolerance and the available clearance around the cell.
7.0 mm Thickness for a Defined Stack-Up
The 7.0 mm profile helps establish available depth around the pouch cell. Include cushioning, protection components and nearby parts in the enclosure review.
120mΩ for Voltage-Drop Evaluation
The listed internal resistance provides an initial reference for load and voltage stability discussions. Test the finished battery configuration under the intended operating conditions.
Curved Battery Category for Shaped Product Concepts
701238 is included in ZERNE's curved lithium polymer battery range. Confirm the suitable construction, assembly method, protection and final device integration requirements.
Battery calculation
Check Capacity, Energy and Estimated Runtime
Use the prefilled 701238 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Runtime and charge time are estimates, not guaranteed product performance.
1.04WhEstimated energy
1.87hEstimated runtime
1.00hIdeal charge time
How to Use the Result
The 701238 values are prefilled: 3.7 V, 280mAh and an approximate 280mA current derived from the listed 1C charge rate. Adjust the load power and efficiency to compare different operating scenarios.
- Use the displayed energy reference for an initial runtime comparison.
- Compare the estimate with measured device load and system efficiency.
- Review charger settings and protection limits for the finished configuration.
- Temperature, resistance growth and cutoff conditions affect actual performance.
Use the result as an initial estimate, then discuss sample testing, charger validation and the final battery specification with ZERNE.
Integration guidance
Plan the 701238 LiPo Battery Around a Compact Enclosure
The 701238 battery should be evaluated as part of the finished device: reserve the 12 mm × 38 mm footprint, allow for the 7.0 mm depth, match the 1C charge rate and review the construction requirements for the curved product design.
Reserve the 12 mm × 38 mm Battery Area
Allow space for the pouch cell, enclosure walls, cushioning, retention features, cable exit and service access around the compact battery footprint.
Integrate the 7.0 mm Profile Into the Enclosure
Check enclosure depth, compression risk and adjacent components around the pouch cell before finalizing the mechanical stack-up.
Confirm the Final Curved-Device Construction
Discuss the required form factor, bend or contour conditions, protection, connector exit and assembly method with ZERNE before freezing the product enclosure.
Applications & Solutions
Applications for the 701238 280mAh Curved LiPo Battery
The 701238 format is best evaluated against application-specific pocket geometry, energy demand and device shape rather than a generic category. These three paths reflect its 7.0 mm × 12 mm × 38 mm envelope and 280mAh capacity.
01Bar-Code Scanners
The 7.0 mm × 12 mm × 38 mm envelope can be reviewed for compact scanner handles and terminals where battery depth, cable exit and grip space must be balanced.
Explore Bar-Code Scanners →
02Smart Door Locks
The 280mAh format offers a compact access-control reference when the pouch must fit beside a latch assembly and controller within a narrow housing.
Explore Smart Door Locks →
03Smart Watches and Wearables
The moderate 1.04Wh reference can support a first-pass wearable comparison where the 7 mm profile, board placement and service interval are understood.
Explore Smart Watches and Wearables →These application paths are starting points for OEM evaluation. Final suitability depends on actual load, runtime, temperature, protection, connector and assembly requirements.
READY FOR A FIT REVIEW?
Request a Technical Review →Confirm the 701238 Battery Fit
Share the finished-device pocket, load profile and temperature conditions to receive a focused recommendation for this 280mAh format.
Related Technical Articles
Technical Guidance for Selecting a 280mAh Curved LiPo Battery
Use these resources to connect the 701238 geometry and energy target with temperature effects, current demand, energy planning and safe operation.
Temperature PlanningHow Temperature Affects the Performance of a LiPo Battery
Understand how temperature changes capacity, resistance, charging and usable LiPo battery performance in the finished device.
Read the Temperature Guide →
Current DemandWhat Is the C Rating of a LiPo Battery and Why It Matters
Review how current demand and C-rating concepts affect peak-load discussions, startup behavior and battery selection.
Read the C-Rating Guide →
Energy PlanningWhat Is Energy Density in a Lithium Polymer Battery?
Relate the 1.04Wh reference to the 7.0 mm × 12 mm × 38 mm envelope when comparing runtime planning, usable volume and the final battery pocket.
Read the Energy-Density Guide →LiPoSAFE
DESIGNCharging · protection · heat
Protection PlanningDESIGNCharging · protection · heat
Why Do LiPo Batteries Explode and How to Prevent It
Review charging, handling, storage and protection considerations before integrating a lithium polymer battery near heat sources.
Read the LiPo Safety Guide →OEM curved battery support
Start the 701238 Inquiry with the Enclosure Requirement
A complete inquiry can include the required runtime, device load, 12 mm × 38 mm battery pocket, 7.0 mm depth, device shape, charger and documentation needed to evaluate this 280mAh curved cell.
Information to Include in Your Inquiry
Share the product conditions that determine how the 701238 model will perform in the finished device, especially its battery pocket, device contour, runtime target, load and charging window.
- Target runtime and duty cycle
- Voltage, capacity and battery pocket
- Device shape and available clearance
- Charger and charging conditions
- Operating and storage environment
- Connector, quantity and approval timing
When a Standard Format Is Not Enough
ZERNE can discuss alternate curved-battery capacity, geometry, protection, connector and assembly requirements when the 701238 specification does not match the finished product.
Discuss a Custom BatteryFAQ
701238 Curved Battery Questions
Find answers about the 701238 3.7 V 280mAh lithium polymer battery, including its 7.0 mm profile, 12 mm × 38 mm footprint, 1C charge rate, 120mΩ internal resistance and curved-device design considerations.
What Are the Dimensions of the 701238 LiPo Battery?
The 701238 battery measures 7.0 mm in thickness, 12 mm in width and 38 mm in length.
How Much Capacity and Energy Does the 701238 Battery Provide?
The rated capacity is 280mAh at a nominal voltage of 3.7 V. Its calculated energy is approximately 1.04Wh before system losses.
What Charging Rate Is Listed for the 701238 Battery?
The 701238 battery has a listed 1C charging rate. Confirm the charging current, charging conditions and protection limits for your configuration.
What Is the Internal Resistance of the 701238 Battery?
The listed internal resistance is 120mΩ. Resistance can vary with temperature, state of charge, test method and production tolerance, so voltage stability can be assessed under the intended device load.
Is the 701238 Battery Suitable for Curved Devices?
701238 is included in ZERNE's curved lithium polymer battery range. Confirm the suitable construction, assembly method, protection, connector and final device integration requirements.
What Should Be Checked Before Integrating the 701238 Battery?
Review the 12 mm × 38 mm battery area, 7.0 mm depth, device shape, retention, cable exit, protection design, charger, peak load and connector requirements with ZERNE.
Curved battery inquiry
Review the 701238 Battery Fit with ZERNE
Share the application, runtime target, load profile, 12 mm × 38 mm battery area, 7.0 mm depth, device shape, charging conditions and annual demand so ZERNE can recommend the right sample and validation path.
- Product model and target application
- Required voltage, capacity and runtime
- Device contour and battery-pocket dimensions
- Charger, connector and documentation needs