0.43Wh Calculated Energy for Compact Electronics
This 3.7 V lithium polymer battery provides a starting point for runtime planning in low-power sensors, compact wearables and other small electronic products.
3.7 V Curved Lithium Polymer Battery
3.7 V 115mAh Lithium Polymer Battery 50093
The 50093 lipo battery combines 3.7 V nominal voltage, 115mAh capacity, a compact 5.0 mm × 9.0 mm × 35 mm pouch envelope, a 1C charging rate and 150mΩ internal resistance. Its narrow, low-capacity format provides approximately 0.43Wh of calculated energy for compact curved-device designs where battery-pocket space is tightly constrained.
500939.0 × 35 mm5.0 mm profile
115mAh LiPo50093 reference format
50093 Curved LiPo BatteryNeutral reference visual for narrow low-capacity curved-device format
3.7 V · 0.43 WhProduct snapshot
A Compact 115mAh LiPo Format for Curved-Device Integration
The 50093 LiPo battery combines 115mAh capacity with a 5.0 mm × 9.0 mm × 35 mm pouch envelope. Its narrow footprint gives product teams a small battery reference for curved or space-constrained devices that need a defined low-profile power source. See the curved lithium polymer battery range when comparing nearby formats.
5.0 mm Thickness for Limited Enclosure Depth
The listed 5.0 mm thickness and 9.0 mm × 35 mm footprint help engineering teams review battery-pocket fit, cushioning, cable routing and the available space around a compact cell.
3.7 VNominal voltage
≈0.43WhCalculated energy
5.0 mmBattery thickness
35 mmBattery length
Technical data
50093 Battery Specifications
The 50093 lipo battery combines a 3.7 V nominal voltage, 115mAh capacity, 1C charge rate and 5.0 mm × 9.0 mm × 35 mm dimensions for compact electronics and curved-battery integration evaluation.
| 50093 Mechanical and Electrical Specifications | |
|---|---|
| Product number | 50093 |
| Nominal voltage | 3.7 V |
| Rated capacity | 115mAh |
| Charge rate | 1C |
| Battery dimensions | 5.0 mm × 9.0 mm × 35 mm |
| Internal resistance | 150mΩ |
| Calculated Electrical References | |
| Standard charge current | Approx. 58mA |
| Rapid charge current | Approx. 115mA |
| Standard discharge current | Approx. 23mA |
| Maximum discharge current | Approx. 115mA |
| Calculated energy | Approx. 0.43Wh |
The 50093 lithium polymer battery is listed at 3.7 V, 115mAh, 1C charging, 5.0 mm × 9.0 mm × 35 mm and 150mΩ internal resistance. Confirm charging, discharge, protection, connector and curved-device integration information for your intended product and operating conditions.
Product characteristics & advantages
Why Evaluate the 50093 115mAh Curved LiPo Battery?
The 50093 model brings together a 0.43Wh calculated energy budget, 5.0 mm profile, 9.0 mm × 35 mm footprint, 115mAh capacity and 150mΩ internal resistance. Its main design value is compact packaging for products with limited battery-pocket space.
The 50093 lithium polymer battery is intended for OEM teams that need a small energy source and can benefit from a narrow, low-profile pouch format. Its approximately 0.43Wh calculated energy supports early comparisons of low-power sensing, intermittent communication and short operating cycles. The 9.0 mm × 35 mm footprint provides a compact packaging reference, while the 5.0 mm thickness helps define the enclosure stack-up. The listed 1C charge rate and 150mΩ internal resistance provide starting points for charger matching and voltage-drop discussions. Use the technical review to review the final battery arrangement, connector, protection design and curved-device requirements.
115mAh for Low-Power Device Planning
The 115mAh capacity and approximately 0.43Wh calculated energy help compare standby periods, sensor activity and intermittent communication in compact OEM electronics.
9.0 mm × 35 mm Area for Restricted Battery Pockets
The compact footprint provides a narrow rectangular reference for small devices. Review retention, cable exit, enclosure tolerance and the available space around the cell.
5.0 mm Thickness for Limited Enclosure Depth
The 5.0 mm profile helps establish available depth around a compact pouch cell. Include cushioning, protection components and nearby components in the mechanical review.
150mΩ for Voltage-Drop Evaluation
The listed internal resistance provides an initial reference for load and voltage stability discussions. Test the finished battery configuration under the intended operating conditions.
Curved Battery Category for Non-Flat Product Concepts
50093 is included in ZERNE's curved lithium polymer battery range. Confirm the suitable construction, assembly method, protection and final device integration requirements.
Battery calculation
Check Capacity, Energy and Estimated Runtime
Use the prefilled 50093 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Runtime and charge time are estimates, not guaranteed product performance.
0.43WhEstimated energy
0.77hEstimated runtime
1.00hIdeal charge time
How to Use the Result
The 50093 values are prefilled: 3.7 V, 115mAh and an approximate 115mA current derived from the listed 1C charge rate. Adjust the load power and efficiency to compare different operating scenarios.
- Use the displayed energy reference for an initial runtime comparison.
- Compare the estimate with measured device load and system efficiency.
- Review charger settings and protection limits for the finished configuration.
- Temperature, resistance growth and cutoff conditions affect actual performance.
Use the result as an initial estimate, then discuss sample testing, charger validation and the final battery specification with ZERNE.
Integration guidance
Plan the 50093 LiPo Battery Around a Narrow Battery Pocket
The 50093 battery should be evaluated as part of the finished device: reserve the 9.0 mm × 35 mm footprint, allow for the 5.0 mm depth, match the 1C charge rate and review the construction requirements for the curved product design.
Reserve the 9.0 mm × 35 mm Battery Area
Allow space for the pouch cell, enclosure walls, cushioning, retention features, cable exit and service access around the compact battery footprint.
Integrate the 5.0 mm Profile Into the Enclosure
Check enclosure depth, compression risk and adjacent components around the compact pouch cell before finalizing the mechanical stack-up.
Confirm the Final Curved-Device Construction
Discuss the required form factor, bend or contour conditions, protection, connector exit and assembly method with ZERNE before freezing the product enclosure.
Applications & Solutions
Applications for the 50093 115mAh Curved LiPo Battery
The 50093 format is best evaluated against application-specific pocket geometry, energy demand and device shape rather than a generic category. These three paths reflect its 5.0 mm × 9.0 mm × 35 mm envelope and 115mAh capacity.
01Smart Door Locks
The 5.0 mm × 9.0 mm × 35 mm profile can be compared with compact access-control housings where a narrow battery channel sits beside latch mechanics and a control board.
Explore Smart Door Locks →
02Smart Watches and Wearables
The 115mAh energy target suits an early review of compact wearables and small connected electronics where thickness, retention and low-duty-cycle runtime matter.
Explore Smart Watches and Wearables →
03Bar-Code Scanners
The narrow 9 mm width can be considered for handheld scanning accessories with a slim battery route, subject to grip clearance and connector placement.
Explore Bar-Code Scanners →These application paths are starting points for OEM evaluation. Final suitability depends on actual load, runtime, temperature, protection, connector and assembly requirements.
READY FOR A FIT REVIEW?
Request a Technical Review →Confirm the 50093 Battery Fit
Share the finished-device pocket, load profile and temperature conditions to receive a focused recommendation for this 115mAh format.
Related Technical Articles
Technical Guidance for Selecting a 115mAh Curved LiPo Battery
Use these resources to connect the 50093 geometry and energy target with temperature effects, current demand, energy planning and safe operation.
Temperature PlanningHow Temperature Affects the Performance of a LiPo Battery
Understand how temperature changes capacity, resistance, charging and usable LiPo battery performance in the finished device.
Read the Temperature Guide →
Current DemandWhat Is the C Rating of a LiPo Battery and Why It Matters
Review how current demand and C-rating concepts affect peak-load discussions, startup behavior and battery selection.
Read the C-Rating Guide →
Energy PlanningWhat Is Energy Density in a Lithium Polymer Battery?
Relate the 0.43Wh reference to the 5.0 mm × 9.0 mm × 35 mm envelope when comparing runtime planning, usable volume and the final battery pocket.
Read the Energy-Density Guide →LiPoSAFE
DESIGNCharging · protection · heat
Protection PlanningDESIGNCharging · protection · heat
Why Do LiPo Batteries Explode and How to Prevent It
Review charging, handling, storage and protection considerations before integrating a lithium polymer battery near heat sources.
Read the LiPo Safety Guide →OEM curved battery support
Start the 50093 Inquiry with the Enclosure Requirement
A complete inquiry can include the required runtime, device load, 9.0 mm × 35 mm battery pocket, 5.0 mm depth, device shape, charger and documentation needed to evaluate this 115mAh curved cell.
Information to Include in Your Inquiry
Share the product conditions that determine how the 50093 model will perform in the finished device, especially its battery pocket, device contour, runtime target, load and charging window.
- Target runtime and duty cycle
- Voltage, capacity and battery pocket
- Device shape and available clearance
- Charger and charging conditions
- Operating and storage environment
- Connector, quantity and approval timing
When a Standard Format Is Not Enough
ZERNE can discuss alternate curved-battery capacity, geometry, protection, connector and assembly requirements when the 50093 specification does not match the finished product.
Discuss a Custom BatteryFAQ
50093 Curved Battery Questions
Find answers about the 50093 3.7 V 115mAh lithium polymer battery, including its 5.0 mm profile, 9.0 mm × 35 mm footprint, 1C charge rate, 150mΩ internal resistance and curved-device design considerations.
What Are the Dimensions of the 50093 LiPo Battery?
The 50093 battery measures 5.0 mm in thickness, 9.0 mm in width and 35 mm in length.
How Much Capacity and Energy Does the 50093 Battery Provide?
The rated capacity is 115mAh at a nominal voltage of 3.7 V. Its calculated energy is approximately 0.43Wh before system losses.
What Charging Rate Is Listed for the 50093 Battery?
The 50093 battery has a listed 1C charging rate. Confirm the charging current, charging conditions and protection limits for your configuration.
What Is the Internal Resistance of the 50093 Battery?
The listed internal resistance is 150mΩ. Resistance can vary with temperature, state of charge, test method and production tolerance, so voltage stability can be assessed under the intended device load.
Is the 50093 Battery Suitable for Curved Devices?
50093 is included in ZERNE's curved lithium polymer battery range. Confirm the suitable construction, assembly method, protection, connector and final device integration requirements.
What Should Be Checked Before Integrating the 50093 Battery?
Review the 9.0 mm × 35 mm battery area, 5.0 mm depth, device shape, retention, cable exit, protection design, charger, peak load and connector requirements with ZERNE.
Curved battery inquiry
Review the 50093 Battery Fit with ZERNE
Share the application, runtime target, load profile, 9.0 mm × 35 mm battery area, 5.0 mm depth, device shape, charging conditions and annual demand so ZERNE can recommend the right sample and validation path.
- Product model and target application
- Required voltage, capacity and runtime
- Device contour and battery-pocket dimensions
- Charger, connector and documentation needs