Why Evaluate the 762525 Format?
The near-square footprint can simplify placement in a compact housing where a long battery would compete with the PCB or enclosure edge.
3.7 V Lithium Polymer Battery
3.7 V 265mAh Lithium Polymer Battery 762525
The 762525 LiPo battery provides a 265mAh rated capacity in a 7.6mm × 25mm × 25mm near-square envelope. Its approximately 0.98Wh energy reference gives OEM teams a practical mid-range option when the enclosure offers a broad compact pocket rather than a long channel.
762525 LiPo Battery Reference7.6mm × 25mm × 25mm Format
3.7 V · ≈0.98WhProduct Snapshot
A Near-Square Pocket for a 265mAh Target
The 762525 format uses its 25mm × 25mm plan area to concentrate a mid-range capacity. It is useful for comparing compact energy reserve against the depth and width available around a board, sensor or display.
Compare Energy with the Depth Limit
The 265mAh capacity and approximately 0.98Wh calculated energy provide a clear step above smaller cells, while the 7.6mm thickness must be reserved honestly in the stack-up.
265mAhRated Capacity
0.98WhCalculated Energy
7.6mmCell Thickness
120mΩInternal Resistance
Technical Data
762525 LiPo Battery Specifications
The table separates confirmed configuration data from calculated electrical references so the 762525 format can be reviewed quickly during product planning.
| Mechanical and Electrical Specifications | |
|---|---|
| Product number | 762525 |
| Nominal voltage | 3.7 V |
| Rated capacity | 265mAh |
| Battery dimensions | 7.6mm × 25mm × 25mm |
| Approximate battery weight | Approx. 5.3g |
| C-rate | 1C |
| Internal resistance | 120mΩ |
| Calculated Electrical References | |
| Standard charge current | Approx. 132.5mA |
| Rapid charge current | Approx. 265mA |
| Standard discharge current | Approx. 53mA |
| Maximum discharge current | Approx. 265mA |
| Calculated energy | Approx. 0.98Wh |
Approximate weight follows the 3.7 V LiPo family reference. Current and energy values are calculated planning references, while internal resistance is a supplied reference; confirm the final charger, protection and load specification for the finished battery.
Product Characteristics & Advantages
Square Footprint for Mid-Range Energy: Why Evaluate the 762525 LiPo Battery?
The 762525 is a square-pocket reference for products that need more energy than a very small cell but do not have a long battery channel. Its main selection question is how much depth and plan area the 265mAh target can use.
The 762525 is a square-pocket reference for products that need more energy than a very small cell but do not have a long battery channel. Its main selection question is how much depth and plan area the 265mAh target can use. The calculated electrical references provide a structured starting point for charger, load and protection discussions, while the final battery remains a configurable OEM design.
25mm × 25mm for Compact Placement
The near-square outline can sit beneath or beside a compact electronics assembly without creating a long internal route.
0.98Wh for a Mid-Range Operating Window
The calculated energy can support early comparisons of sensor activity, wireless reporting and short portable sessions.
7.6mm for a Deeper Compact Bay
Check the thickness against housing ribs, display height, cushioning and the finished protection or connector arrangement.
120mΩ for Peak-Load Planning
The listed resistance is a useful reference for voltage-drop and startup questions, not a replacement for complete battery testing.
Approx. 5.3g Family Reference
Use the derived mass in early enclosure and handling discussions, then confirm the assembled product weight before release.
Battery Calculation
Check 762525 Energy and Estimated Runtime
Use the prefilled 762525 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Approx. 132.5mA is the approximate standard-charge reference for 265mAh.
0.98WhEstimated Energy
—Estimated Runtime
—Ideal Charge Time
How to Use the Result
The 762525 reference values are prefilled: 3.7 V, 265mAh and a standard-charge reference of approximately 132.5mA. Adjust the load power and efficiency to compare operating scenarios; the calculator does not infer safe limits from capacity alone.
- Energy = voltage × capacity ÷ 1000
- Runtime estimate = energy × efficiency ÷ load power
- Ideal charge time = capacity ÷ entered charge current
- Actual runtime depends on load profile, temperature, cutoff and system losses
Use the result for early comparison, then confirm the charger, protection, connector and final battery specification through sample testing.
Integration Guidance
Fit the 762525 Battery in a Broad Compact Bay
The 762525 should be evaluated as a compact, deeper package. Review the 25mm × 25mm plan area, 7.6mm depth, connector route and 265mAh energy target together.
Reserve the Square Outline
Keep the full 25mm × 25mm area clear of sharp housing features and plan the retention method before placing the board around it.
Check the Depth with Neighboring Parts
The 7.6mm profile should be assessed with displays, buttons, sensors, cushioning and connector height rather than treated as the only assembly dimension.
Use 0.98Wh for Early Runtime Work
Compare the calculated energy with active load and recharge expectations, remembering that cutoff, temperature and system losses affect usable energy.
Review Voltage Drop at Peaks
The 120mΩ listing can guide early power-path questions. Validate peak load, cable and protection behavior on the finished battery.
The stated dimensions and calculated values are reference inputs for design planning. Confirm the finished battery drawing, tolerance, protection, connector and test conditions before production release.
Applications & Solutions
Applications for the 762525 Square-Pocket LiPo Battery
The 762525 format can be considered for compact devices with a broad battery bay, moderate energy requirements and enough depth to accommodate the pouch and finished assembly.
01PDA Machines
The 7.6mm × 25mm × 25mm format can be evaluated in a compact PDA or handheld terminal where the battery pocket sits behind the display or beside the main board.
View PDA Machine Battery Solutions →
02Game Controllers
The 265mAh reference is useful for controller layouts that need a compact rectangular cell, predictable cable exit and enough reserve for repeated wireless use.
View Game Controller Battery Solutions →
03Barcode Scanners
The 25mm × 25mm plan area can be compared with handheld barcode scanners where grip geometry, trigger clearance and scan-session duty cycle shape the battery choice.
View Barcode Scanner Battery Solutions →These application paths are starting points for OEM evaluation. Final suitability depends on actual load, runtime, temperature, protection, connector and assembly requirements.
Related Technical Articles
Guidance for 762525 Battery Selection
These articles support the decisions around energy density, C-rate and temperature for a compact mid-range pouch cell.
Energy PlanningWhat Is Energy Density in a Lithium Polymer Battery?
Relate the 0.98Wh target to the near-square volume available in the product.
Read the energy planning guide →
Current DemandWhat Is the C Rating of a LiPo Battery and Why It Matters
Use the 120mΩ reference and calculated current values to frame peak-load review.
Read the current demand guide →
Operating ConditionsHow Temperature Affects the Performance of a LiPo Battery
Check how heat and charging conditions can influence a deeper compact cell.
Read the operating conditions guide →OEM Battery Support
Start the 762525 Inquiry with the Broad Pocket
Share the 25mm × 25mm pocket, 7.6mm depth, target runtime and load profile so the 265mAh reference can be compared with the full enclosure.
Useful RFQ Inputs
A useful RFQ should clarify whether the device has more usable width or more usable length around the battery bay.
- 25mm × 25mm pocket and 7.6mm clearance
- 265mAh energy target and runtime
- Continuous/peak load profile
- Charger, protection and thermal conditions
- Connector, cable route and retention
- Samples, quantity and documentation needs
When the Square Pocket Is Not the Best Fit
ZERNE can compare a thinner long format, a narrower deeper cell or a custom geometry when the 762525 plan area does not match the housing.
Discuss a Custom BatteryFAQ
762525 LiPo Battery Questions
Find answers about the 762525 3.7 V 265mAh lithium polymer battery, including its near-square dimensions, calculated energy, current references and enclosure fit.
What are the dimensions of the 762525 LiPo battery?
The 762525 reference is specified as 7.6mm × 25mm × 25mm in thickness × width × length order. Allow additional room for cushioning, retention, leads, connector and protection.
How much energy does the 762525 battery provide?
The rated capacity is 265mAh at a nominal voltage of 3.7 V. The calculated energy is approximately 0.98Wh before cutoff, load, temperature, resistance, protection and system losses.
What is the approximate weight of the 762525 battery?
Using the 3.7 V LiPo family weight reference, the 265mAh configuration is approximately 5.3g. Finished weight depends on leads, connector, protection and assembly details.
What current references apply to the 762525 configuration?
The calculated current references are approximately 132.5mA standard charge, 265mA rapid charge, 53mA standard discharge and 265mA maximum discharge. Confirm the final safe limits for the completed battery.
What is the main packaging advantage of 762525?
The 762525 provides a near-square 25mm × 25mm plan area, which can be easier to place in a broad compact bay than a long rectangular battery.
Should 762525 be selected only by its 265mAh capacity?
No. Compare the capacity with the 7.6mm depth, pocket area, load profile, resistance, connector path and required operating interval.
Technical Inquiry
Review the 762525 Compact Battery Bay with ZERNE
Share the broad pocket, available depth, operating interval and peak-load conditions so the 265mAh format can be reviewed with the enclosure and charger design.
- 7.6mm depth and 25mm × 25mm pocket
- 265mAh target and operating interval
- Load, charger and 120mΩ resistance reference
- Connector, samples and production plan