Why Evaluate the 652023 Format?
The 6.5mm thickness and near-square 20mm × 23mm footprint can fit a compact electronics bay without requiring the long channel used by linear cells.
3.7 V Lithium Polymer Battery
3.7 V 220mAh Lithium Polymer Battery 652023
The 652023 LiPo battery provides a 220mAh rated capacity in a 6.5mm × 20mm × 23mm compact rectangular format. Its approximately 0.81Wh energy reference and 110mΩ listed resistance make it a useful starting point for short-pocket products that need a balanced package and early voltage-drop review.
652023 LiPo Battery Reference6.5mm × 20mm × 23mm Format
3.7 V · ≈0.81WhProduct Snapshot
A Compact 220mAh Format with a Balanced Footprint
The 652023 sits between very small cells and larger mid-range references. Its 20mm × 23mm plan area gives the design team a concentrated pocket, while the listed resistance supports an explicit discussion about startup and load response.
Keep Resistance in the Selection Discussion
The 110mΩ listing is a useful input for early voltage-drop questions. Pair it with actual peak load, charger behavior and connector resistance rather than reading it as a complete system limit.
220mAhRated Capacity
0.81WhCalculated Energy
6.5mmCell Thickness
110mΩInternal Resistance
Technical Data
652023 LiPo Battery Specifications
The table separates confirmed configuration data from calculated electrical references so the 652023 format can be reviewed quickly during product planning.
| Mechanical and Electrical Specifications | |
|---|---|
| Product number | 652023 |
| Nominal voltage | 3.7 V |
| Rated capacity | 220mAh |
| Battery dimensions | 6.5mm × 20mm × 23mm |
| Approximate battery weight | Approx. 4.4g |
| C-rate | 1C |
| Internal resistance | 110mΩ |
| Calculated Electrical References | |
| Standard charge current | Approx. 110mA |
| Rapid charge current | Approx. 220mA |
| Standard discharge current | Approx. 44mA |
| Maximum discharge current | Approx. 220mA |
| Calculated energy | Approx. 0.81Wh |
Approximate weight follows the 3.7 V LiPo family reference. Current and energy values are calculated planning references, while internal resistance is a supplied reference; confirm the final charger, protection and load specification for the finished battery.
Product Characteristics & Advantages
Moderate-Capacity Square-Pocket Balance: Why Evaluate the 652023 LiPo Battery?
The 652023 is positioned around a compact footprint and a relatively low listed resistance within this small-capacity series. It gives OEM teams a practical comparison point for energy, pocket size and power-path planning.
The 652023 is positioned around a compact footprint and a relatively low listed resistance within this small-capacity series. It gives OEM teams a practical comparison point for energy, pocket size and power-path planning. The calculated electrical references provide a structured starting point for charger, load and protection discussions, while the final battery remains a configurable OEM design.
20mm × 23mm for Compact Placement
The near-square plan area can sit close to a board or behind a small display without requiring a long internal battery channel.
0.81Wh for Moderate Low-Power Use
The calculated energy provides a defined basis for comparing sensing, periodic wireless activity and short portable operating periods.
110mΩ for Early Voltage-Drop Screening
The listed resistance can help the electrical team identify questions around startup, radio bursts and connector losses.
6.5mm for a Controlled Housing Stack
Review the cell thickness with cushioning, retention, PCB height and the finished protection arrangement before approving the pocket.
Approx. 4.4g Family Reference
The derived weight supports preliminary portable-device budgeting while final assembly details remain open for confirmation.
Battery Calculation
Check 652023 Energy and Estimated Runtime
Use the prefilled 652023 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Approx. 110mA is the approximate standard-charge reference for 220mAh.
0.81WhEstimated Energy
—Estimated Runtime
—Ideal Charge Time
How to Use the Result
The 652023 reference values are prefilled: 3.7 V, 220mAh and a standard-charge reference of approximately 110mA. Adjust the load power and efficiency to compare operating scenarios; the calculator does not infer safe limits from capacity alone.
- Energy = voltage × capacity ÷ 1000
- Runtime estimate = energy × efficiency ÷ load power
- Ideal charge time = capacity ÷ entered charge current
- Actual runtime depends on load profile, temperature, cutoff and system losses
Use the result for early comparison, then confirm the charger, protection, connector and final battery specification through sample testing.
Integration Guidance
Integrate the 652023 Battery Around the Power Path
The 652023 selection should connect the compact 20mm × 23mm pocket with the 220mAh energy target and the listed 110mΩ resistance. Review mechanical clearance and peak-load behavior together.
Keep the Package Square and Clear
Use the 20mm × 23mm outline to plan board-side placement, cushioning and retention without creating a pressure point at the pouch edge.
Make the Resistance Discussion Concrete
Compare the 110mΩ reference with peak load, cable length and connector resistance when reviewing startup voltage and system margin.
Set the Energy Target Early
Approximately 0.81Wh can be compared with the device duty cycle, standby interval and desired recharge frequency before sampling.
Confirm the Charging Arrangement
The capacity-derived current references support early charger selection, but the final charge, protection and thermal limits must be validated on the finished battery.
The stated dimensions and calculated values are reference inputs for design planning. Confirm the finished battery drawing, tolerance, protection, connector and test conditions before production release.
Applications & Solutions
Applications for the 652023 Compact LiPo Battery
The 652023 format can be evaluated in compact devices where a near-square battery pocket, moderate energy target and clear peak-load discussion are all important.
01Blood Pressure Monitors
The near-square 220mAh format can be screened for compact blood-pressure monitors where the battery pocket must coexist with sensing electronics, pump components and the enclosure shell.
View Blood Pressure Monitor Solutions →
02Blood Glucose Monitors
The 20mm × 23mm footprint offers a focused reference for portable glucose-monitor layouts that need a controlled battery pocket beside the display and sensing electronics.
View Blood Glucose Monitor Solutions →
03Personal Trackers
The compact format can also be compared with personal trackers that need a short battery pocket, wireless bursts and a defined standby target.
View Personal Tracker Battery Solutions →These application paths are starting points for OEM evaluation. Final suitability depends on actual load, runtime, temperature, protection, connector and assembly requirements.
Related Technical Articles
Guidance for 652023 Battery Selection
These resources support a focused review of resistance, energy and thermal conditions around a compact 652023 power source.
Current DemandWhat Is the C Rating of a LiPo Battery and Why It Matters
Use the listed 110mΩ value as an entry point for C-rate, startup and peak-load questions.
Read the current demand guide →
Energy PlanningWhat Is Energy Density in a Lithium Polymer Battery?
Relate the 0.81Wh reference to the compact plan area and expected device duty cycle.
Read the energy planning guide →
Operating ConditionsHow Temperature Affects the Performance of a LiPo Battery
Check how temperature may influence resistance and available capacity in a small enclosed product.
Read the operating conditions guide →OEM Battery Support
Start the 652023 Inquiry with the Power Budget
Share the 20mm × 23mm pocket, 6.5mm clearance, load profile and expected runtime so the 220mAh reference can be reviewed as part of the complete power path.
Useful RFQ Inputs
The RFQ should show how the compact pocket and the listed resistance relate to actual system demand.
- 20mm × 23mm pocket and 6.5mm depth
- 220mAh energy target and runtime
- Startup, continuous and peak load
- Charger, protection and thermal conditions
- Connector, cable route and retention
- Samples, quantity and documentation needs
When the Compact Pocket Needs Another Balance
ZERNE can compare a thinner, wider or higher-capacity configuration when the 652023 footprint does not meet the final enclosure or runtime target.
Discuss a Custom BatteryFAQ
652023 LiPo Battery Questions
Find answers about the 652023 3.7 V 220mAh lithium polymer battery, including its compact footprint, calculated current references, resistance and OEM fit.
What are the dimensions of the 652023 LiPo battery?
The 652023 reference is specified as 6.5mm × 20mm × 23mm in thickness × width × length order. Allow additional room for cushioning, retention, leads, connector and protection.
How much energy does the 652023 battery provide?
The rated capacity is 220mAh at a nominal voltage of 3.7 V. The calculated energy is approximately 0.81Wh before cutoff, load, temperature, resistance, protection and system losses.
What is the approximate weight of the 652023 battery?
Using the 3.7 V LiPo family weight reference, the 220mAh configuration is approximately 4.4g. Finished weight depends on leads, connector, protection and assembly details.
What current references apply to the 652023 configuration?
The calculated current references are approximately 110mA standard charge, 220mA rapid charge, 44mA standard discharge and 220mA maximum discharge. Confirm the final safe limits for the completed battery.
Why is the 110mΩ value relevant to 652023 selection?
The listed resistance helps frame early questions about voltage drop and startup behavior. It must be considered with the actual load, wires, connector and protection circuit.
What makes 652023 different from a long linear cell?
Its 20mm × 23mm plan area is concentrated rather than elongated, so it can suit a compact pocket where a 47mm or 50mm battery channel is not available.
Technical Inquiry
Review the 652023 Power Path with ZERNE
Share the compact battery pocket, peak-load behavior, expected runtime and connector plan so the 220mAh format can be assessed with the charger and protection design.
- 6.5mm depth and 20mm × 23mm pocket
- 220mAh target and operating interval
- Load, charger and 110mΩ resistance reference
- Connector, samples and production plan