4.81Wh Calculated Energy for Moderate Runtime Targets
The 3.7V nominal platform and 1300mAh rated capacity provide approximately 4.81Wh before system losses and application-specific derating.
3.7V Lithium Polymer Battery · 1000–2000mAh Range
3.7 V 1300mAh Lithium Polymer Battery 902355
The 902355 LiPo battery combines a 3.7V platform, 1300mAh rated capacity and a 9.0mm × 23mm × 55mm pouch format. Its narrower width and moderate length create a focused reference for devices that need more capacity without a broad battery pocket.
90235523mm55mm9.0mm
9023551300mAh · 3.7V9.0mm × 23mm × 55mm
902355 LiPo BatteryApprox. 4.81Wh calculated energy in a 1300mAh-class pouch format
3.7V · 9.0mm × 23mm × 55mm reference visualProduct snapshot
A narrow 1300mAh format for compact rectangular product layouts
The 902355 sits at the intersection of moderate capacity and a narrow rectangular footprint, helping teams compare width, length and enclosure depth together. A narrow 23mm-wide 1300mAh alternative for moderate-length layouts that cannot accept a broad mid-capacity pouch.
A Narrow 23mm × 55mm Battery Footprint
The 9.0mm × 23mm × 55mm envelope gives teams a defined reference for narrow housings, side channels and retention points.
3.7V · 1300mAhNominal voltage · rated capacity
≈26gCalculated weight reference
≈650 / 1300mACharge current · standard / rapid
≈260 / 1300mADischarge current · standard / maximum
Current, energy and weight values are calculated references for early planning. Confirm final limits and the finished battery configuration with ZERNE.
Technical data
902355 LiPo Battery Specifications
These specifications summarize the 902355 reference format. A narrow 23mm-wide 1300mAh alternative for moderate-length layouts that cannot accept a broad mid-capacity pouch. Confirm final construction, protection, connector and validation conditions for the finished OEM battery configuration.
| 902355 Mechanical and Electrical Specifications | |
|---|---|
| Product number | 902355 |
| Nominal voltage | 3.7V |
| Rated capacity | 1300mAh |
| Confirmed C-rate | 1C |
| Battery dimension | 9.0mm × 23mm × 55mm |
| Listed internal resistance | 70mΩ |
| Calculated Electrical References | |
| Standard charge current | Approx. 650mA |
| Rapid charge current | Approx. 1300mA |
| Standard discharge current | Approx. 260mA |
| Maximum discharge current | Approx. 1300mA |
| Calculated energy | Approx. 4.81Wh |
The direct 902355 values are used as the model reference. Current, energy and weight figures are calculated references rather than measured production results. Confirm the final charging profile, discharge demand, protection configuration, connector, tolerances and validation conditions with ZERNE for the finished device.
Product characteristics & advantages
Why Evaluate the 902355 1300mAh LiPo Battery?
The 902355 sits at the intersection of moderate capacity and a narrow rectangular footprint, helping teams compare width, length and enclosure depth together. A narrow 23mm-wide 1300mAh alternative for moderate-length layouts that cannot accept a broad mid-capacity pouch. The geometry and energy-planning tradeoff are the primary selection focus for this reference model.
The 902355 is a geometry-led alternative to wider 1200–1350mAh formats. It can be evaluated when the product has moderate length available but limited width.
1300mAh for Practical Runtime Planning
The capacity supports a defined starting point for runtime, standby and duty-cycle comparison.
23mm Width for Space-Constrained Layouts
The width can help teams place the pouch alongside PCBs, displays or structural features.
A Manageable Linear Pocket
The length provides a clear reference for enclosure fit, cable exit and service clearance.
70mΩ for Initial Load Discussion
The listed resistance can frame early voltage-drop review; confirm performance with the finished configuration.
Battery calculation
Check 902355 Energy and Estimated Runtime
Use the prefilled 902355 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Runtime is an estimate, not guaranteed product performance.
4.81WhEstimated energy
8.66hEstimated runtime
How to Use the Result
The 902355 values are prefilled: 3.7V and 1300mAh. Adjust the load power and efficiency to compare different operating scenarios.
- Energy is estimated from nominal voltage and capacity
- Runtime estimate = energy × efficiency ÷ load power
- Actual runtime depends on load profile, cutoff, temperature and system losses
- Use sample testing to validate the final battery and device combination
Use the result as an initial estimate, then discuss charger validation and the final battery specification with ZERNE.
Integration guidance
Plan the 902355 Battery Around the 9.0mm × 23mm × 55mm Envelope
Reserve the stated battery pocket, allow for the 9.0mm thickness, review cable and connector access, and validate the charger, protection and finished load profile before production. Review 23mm width beside the PCB and display, then check 55mm length and 9.0mm depth. Use the listed 70mΩ as an initial voltage-drop reference only.
Reserve the 23mm × 55mm Battery Area
Allow space for the pouch cell, enclosure walls, cushioning, retention features, cable exit and service access around the listed footprint.
Check the 9.0mm Profile
Review compression risk, enclosure tolerances and adjacent components around the battery before finalizing the mechanical design.
Confirm Electrical and Protection Requirements
Use the calculated 650mA standard-charge, 1300mA rapid-charge, 260mA standard-discharge and 1300mA maximum-discharge references for early review, then validate the finished battery assembly.
Applications & solution paths
Applications for the 902355 1300mAh LiPo Battery
The 902355 format can be considered for products that match its 9.0mm × 23mm × 55mm envelope and 1300mAh energy target. Fits early layouts with moderate length but limited width, including selected trackers, wearables and compact instruments. Final suitability depends on device load, runtime, enclosure, charging and connector requirements.
01Motorcycle GPS
The 1300 mAh reference can be assessed against motorcycle-GPS reporting intervals, vibration exposure, connector access and the 9.0 mm × 23 mm × 55 mm enclosure space.
View Motorcycle GPS solutions →
02Asset Trackers
The 1300 mAh capacity and 9.0 mm × 23 mm × 55 mm envelope can be compared with asset-tracker reporting intervals, enclosure space and service access.
View Asset Trackers solutions →
03Portable ECG Monitors
The 1300 mAh and calculated energy reference can support early runtime comparisons in portable ECG equipment; confirm load profile, protection and documentation needs.
View Portable ECG Monitors solutions →
04Pet Feeders
The reference can support early review of connected pet-feeder layouts where motor demand, wireless standby and service access must be balanced.
View Pet Feeders solutions →The 902355 is positioned within ZERNE's 3.7V 1000–2000mAh lithium polymer battery range. Ask ZERNE to confirm the final construction, protection, connector, charging limits and validation plan for the required device.
Related technical articles
Technical Guidance for 902355 LiPo Integration
Use these resources to review the energy, geometry, current and safety questions most relevant to a 9.0mm × 23mm × 55mm pouch battery.
TemperatureHow Temperature Affects the Performance of a LiPo Battery
Keep temperature, resistance, charging limits and the usable energy window in the final validation plan.
Read the technical guide →
Energy DensityWhat Is Energy Density in a Lithium Polymer Battery?
Review how watt-hours, capacity and physical volume work together when the battery must fit a defined enclosure.
Read the technical guide →
C-RatingWhat Is the C Rating of a LiPo Battery and Why It Matters
Relate device current demand to charge, discharge and protection planning before finalizing the battery configuration.
Read the technical guide →OEM battery support
Start the 902355 Battery Inquiry with the Device Power Profile
A complete inquiry can include the required runtime, device load, 9.0mm × 23mm × 55mm battery pocket, charger, connector and documentation needed to evaluate this 1300mAh reference format. Send maximum width, usable 55mm length, 9.0mm depth, peak current and expected cable route.
Information to Include in Your Inquiry
Share the product conditions that determine how the 902355 format will fit and perform in the finished device, especially its battery pocket, load and charging window.
- Target runtime and duty cycle
- Voltage, capacity and battery pocket
- 9.0mm depth and enclosure clearance
- Charger and charging conditions
- Operating and storage environment
- Connector, quantity and approval timing
When the Reference Format Is Not Enough
ZERNE can discuss alternate capacity, geometry, protection, connector and assembly requirements when the 902355 specification does not match the finished product.
Discuss a Custom BatteryFAQ
902355 LiPo Battery Questions
Find answers about the 902355 3.7V 1300mAh lithium polymer battery, including its dimensions, calculated energy, current references and OEM integration considerations.
What Are the Dimensions of the 902355 LiPo Battery?
The 902355 battery measures 9.0mm in thickness, 23mm in width and 55mm in length.
What Capacity and Energy Does the 902355 Battery Provide?
The listed rated capacity is 1300mAh at a nominal voltage of 3.7V. The calculated energy is approximately 4.81Wh before system losses.
What Charge and Discharge Current References Apply to 902355?
The calculated references are approximately 650mA for standard charging, 1300mA for rapid charging, 260mA for standard discharge and 1300mA for maximum discharge. Confirm the final production limits and test conditions with ZERNE.
What Is the Approximate Weight of the 902355 Battery?
The calculated weight reference is approximately 26g. Final weight can vary with the completed battery configuration and should be confirmed during sampling.
What Internal Resistance Is Listed for the 902355 Battery?
The supplied reference lists internal resistance of 70mΩ. Actual system behavior should be checked under the finished load, temperature and assembly conditions.
How Should the 902355 Format Be Screened During Early Design?
A narrow 23mm-wide 1300mAh alternative for moderate-length layouts that cannot accept a broad mid-capacity pouch. Confirm the usable pocket and calculated electrical references before requesting samples.
What Is the Main Advantage of the 902355 Battery Format?
The 902355 provides a 1300mAh-class capacity in a 9.0mm × 23mm × 55mm pouch envelope, giving OEM teams a concrete starting point for product-space and energy planning.
Can the 902355 Battery Be Customized?
The 902355 is a reference model. ZERNE can discuss alternate capacity, dimensions, protection, connector and wiring requirements when the listed format does not match the finished product.
What Should Be Confirmed Before Integrating the 902355 Battery?
Review the stated battery area, 9.0mm depth, load profile, charging conditions, protection design, connector, cable exit and enclosure retention with ZERNE.
Lithium polymer battery inquiry
Review the 902355 Battery Fit with ZERNE
Share the application, runtime target, load profile, 9.0mm × 23mm × 55mm battery area, charging conditions and annual demand so ZERNE can recommend the right sample and validation path. Send maximum width, usable 55mm length, 9.0mm depth, peak current and expected cable route.
- Product model and target application
- Required voltage, capacity and runtime
- Battery-pocket dimensions and clearance
- Charger, connector and documentation needs