3.811Wh Calculated Energy for Linear Device Planning
The 3.7V nominal platform and 1030mAh rated capacity provide approximately 3.81Wh before system losses and application-specific derating.
3.7V Lithium Polymer Battery · 1000–2000mAh Range
3.7 V 1030mAh Lithium Polymer Battery 782059
The 782059 LiPo battery provides a 3.7V platform, 1030mAh rated capacity and a 7.8mm × 20mm × 59mm elongated pouch format. Its narrow width can help OEM teams evaluate linear battery placement alongside a PCB, frame or internal channel.
78205920mm59mm7.8mm
7820591030mAh · 3.7V7.8mm × 20mm × 59mm
782059 LiPo BatteryApprox. 3.81Wh calculated energy in a 1030mAh-class pouch format
3.7V · 7.8mm × 20mm × 59mm reference visualProduct snapshot
A narrow elongated format for linear battery pockets
The 782059 model is defined by its narrow 20mm width and 59mm length, making battery-pocket geometry as important as its 1030mAh energy target. A narrow, elongated 20mm × 59mm layout for side channels or linear pockets where a wider pouch would obstruct the product architecture.
A Narrow 20mm × 59mm Battery Footprint
The 7.8mm × 20mm × 59mm envelope can be evaluated for elongated housings, edge channels and layouts with limited width.
3.7V · 1030mAhNominal voltage · rated capacity
≈21gCalculated weight reference
≈515 / 1030mACharge current · standard / rapid
≈206 / 1030mADischarge current · standard / maximum
Current, energy and weight values are calculated references for early planning. Confirm final limits and the finished battery configuration with ZERNE.
Technical data
782059 LiPo Battery Specifications
These specifications summarize the 782059 reference format. A narrow, elongated 20mm × 59mm layout for side channels or linear pockets where a wider pouch would obstruct the product architecture. Confirm final construction, protection, connector and validation conditions for the finished OEM battery configuration.
| 782059 Mechanical and Electrical Specifications | |
|---|---|
| Product number | 782059 |
| Nominal voltage | 3.7V |
| Rated capacity | 1030mAh |
| Confirmed C-rate | 1C |
| Battery dimension | 7.8mm × 20mm × 59mm |
| Listed internal resistance | 60mΩ |
| Calculated Electrical References | |
| Standard charge current | Approx. 515mA |
| Rapid charge current | Approx. 1030mA |
| Standard discharge current | Approx. 206mA |
| Maximum discharge current | Approx. 1030mA |
| Calculated energy | Approx. 3.81Wh |
The direct 782059 values are used as the model reference. Current, energy and weight figures are calculated references rather than measured production results. Confirm the final charging profile, discharge demand, protection configuration, connector, tolerances and validation conditions with ZERNE for the finished device.
Product characteristics & advantages
Why Evaluate the 782059 1030mAh LiPo Battery?
The 782059 model is defined by its narrow 20mm width and 59mm length, making battery-pocket geometry as important as its 1030mAh energy target. A narrow, elongated 20mm × 59mm layout for side channels or linear pockets where a wider pouch would obstruct the product architecture. The geometry and energy-planning tradeoff are the primary selection focus for this reference model.
The 782059 is primarily a packaging reference. Its narrow width and elongated length create a different integration path from squarer 1000–1200mAh battery formats.
20mm for Linear Battery Placement
The narrow dimension can help teams review side-mounted or channel-style battery pockets.
59mm for Distributed Enclosures
The length gives designers a clear reference for retention, cable exit and structural clearance.
A Small Step Above 1000mAh
The capacity supports early comparison of runtime and standby requirements without moving far beyond the compact range.
60mΩ for Initial Load Review
The listed internal resistance can help frame early voltage-drop discussions; validate the finished configuration under its actual load and temperature.
Battery calculation
Check 782059 Energy and Estimated Runtime
Use the prefilled 782059 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Runtime is an estimate, not guaranteed product performance.
3.81WhEstimated energy
6.86hEstimated runtime
How to Use the Result
The 782059 values are prefilled: 3.7V and 1030mAh. Adjust the load power and efficiency to compare different operating scenarios.
- Energy is estimated from nominal voltage and capacity
- Runtime estimate = energy × efficiency ÷ load power
- Actual runtime depends on load profile, cutoff, temperature and system losses
- Use sample testing to validate the final battery and device combination
Use the result as an initial estimate, then discuss charger validation and the final battery specification with ZERNE.
Integration guidance
Plan the 782059 Battery Around the 7.8mm × 20mm × 59mm Envelope
Reserve the stated battery pocket, allow for the 7.8mm thickness, review cable and connector access, and validate the charger, protection and finished load profile before production. Measure the complete 59mm path including connector and retention clearance. Check the 20mm width against rails and PCBs, then verify the 7.8mm depth throughout.
Reserve the 20mm × 59mm Battery Area
Allow space for the pouch cell, enclosure walls, cushioning, retention features, cable exit and service access around the listed footprint.
Check the 7.8mm Profile
Review compression risk, enclosure tolerances and adjacent components around the battery before finalizing the mechanical design.
Confirm Electrical and Protection Requirements
Use the calculated 515mA standard-charge, 1030mA rapid-charge, 206mA standard-discharge and 1030mA maximum-discharge references for early review, then validate the finished battery assembly.
Applications & solution paths
Applications for the 782059 1030mAh LiPo Battery
The 782059 format can be considered for products that match its 7.8mm × 20mm × 59mm envelope and 1030mAh energy target. Relevant to slim or elongated products where width is more restricted than length and a 1030mAh-class target is appropriate. Final suitability depends on device load, runtime, enclosure, charging and connector requirements.
01IoT Devices
The 1030 mAh reference can be compared with sensing, wireless communication, standby time and the available 7.8 mm × 20 mm × 59 mm enclosure space.
View IoT Devices solutions →
02GPS Tracking
The 1030 mAh capacity can be compared with reporting intervals, standby time and communication bursts in compact tracking devices. Review the 7.8 mm × 20 mm × 59 mm envelope, connector access and required service interval.
View GPS Tracking solutions →
03Hearing Aids
The compact pouch can be reviewed against hearing-aid enclosure space, comfort, cable routing and the expected duty cycle.
View Hearing Aids solutions →
04POS Machines
The 7.8 mm × 20 mm × 59 mm plan area can be assessed in a POS terminal where display, scanner, controls and enclosure clearance influence the battery pocket.
View POS Machines solutions →The 782059 is positioned within ZERNE's 3.7V 1000–2000mAh lithium polymer battery range. Ask ZERNE to confirm the final construction, protection, connector, charging limits and validation plan for the required device.
Related technical articles
Technical Guidance for 782059 LiPo Integration
Use these resources to review the energy, geometry, current and safety questions most relevant to a 7.8mm × 20mm × 59mm pouch battery.
Energy DensityWhat Is Energy Density in a Lithium Polymer Battery?
Review how watt-hours, capacity and physical volume work together when the battery must fit a defined enclosure.
Read the technical guide →
RuntimeHow Long Does a Lithium Polymer Battery Work?
Translate the capacity reference into a realistic runtime discussion using the actual device load and cutoff.
Read the technical guide →
TemperatureHow Temperature Affects the Performance of a LiPo Battery
Keep temperature, resistance, charging limits and the usable energy window in the final validation plan.
Read the technical guide →OEM battery support
Start the 782059 Battery Inquiry with the Device Power Profile
A complete inquiry can include the required runtime, device load, 7.8mm × 20mm × 59mm battery pocket, charger, connector and documentation needed to evaluate this 1030mAh reference format. Include the linear-channel length, 20mm width, 7.8mm depth allowance and any bending or cable-routing restrictions.
Information to Include in Your Inquiry
Share the product conditions that determine how the 782059 format will fit and perform in the finished device, especially its battery pocket, load and charging window.
- Target runtime and duty cycle
- Voltage, capacity and battery pocket
- 7.8mm depth and enclosure clearance
- Charger and charging conditions
- Operating and storage environment
- Connector, quantity and approval timing
When the Reference Format Is Not Enough
ZERNE can discuss alternate capacity, geometry, protection, connector and assembly requirements when the 782059 specification does not match the finished product.
Discuss a Custom BatteryFAQ
782059 LiPo Battery Questions
Find answers about the 782059 3.7V 1030mAh lithium polymer battery, including its dimensions, calculated energy, current references and OEM integration considerations.
What Are the Dimensions of the 782059 LiPo Battery?
The 782059 battery measures 7.8mm in thickness, 20mm in width and 59mm in length.
What Capacity and Energy Does the 782059 Battery Provide?
The listed rated capacity is 1030mAh at a nominal voltage of 3.7V. The calculated energy is approximately 3.81Wh before system losses.
What Charge and Discharge Current References Apply to 782059?
The calculated references are approximately 515mA for standard charging, 1030mA for rapid charging, 206mA for standard discharge and 1030mA for maximum discharge. Confirm the final production limits and test conditions with ZERNE.
What Is the Approximate Weight of the 782059 Battery?
The calculated weight reference is approximately 21g. Final weight can vary with the completed battery configuration and should be confirmed during sampling.
What Internal Resistance Is Listed for the 782059 Battery?
The supplied reference lists internal resistance of 60mΩ. Actual system behavior should be checked under the finished load, temperature and assembly conditions.
How Should the 782059 Format Be Screened During Early Design?
A narrow, elongated 20mm × 59mm layout for side channels or linear pockets where a wider pouch would obstruct the product architecture. Confirm the usable pocket and calculated electrical references before requesting samples.
What Is the Main Advantage of the 782059 Battery Format?
The 782059 provides a 1030mAh-class capacity in a 7.8mm × 20mm × 59mm pouch envelope, giving OEM teams a concrete starting point for product-space and energy planning.
Can the 782059 Battery Be Customized?
The 782059 is a reference model. ZERNE can discuss alternate capacity, dimensions, protection, connector and wiring requirements when the listed format does not match the finished product.
What Should Be Confirmed Before Integrating the 782059 Battery?
Review the stated battery area, 7.8mm depth, load profile, charging conditions, protection design, connector, cable exit and enclosure retention with ZERNE.
Lithium polymer battery inquiry
Review the 782059 Battery Fit with ZERNE
Share the application, runtime target, load profile, 7.8mm × 20mm × 59mm battery area, charging conditions and annual demand so ZERNE can recommend the right sample and validation path. Include the linear-channel length, 20mm width, 7.8mm depth allowance and any bending or cable-routing restrictions.
- Product model and target application
- Required voltage, capacity and runtime
- Battery-pocket dimensions and clearance
- Charger, connector and documentation needs