3.70Wh Calculated Energy for Compact Device Planning
The 3.7V nominal platform and 1000mAh rated capacity provide approximately 3.70Wh before system losses and application-specific derating.
3.7V Lithium Polymer Battery · 1000–2000mAh Range
3.7 V 1000mAh Lithium Polymer Battery 703048
The 703048 LiPo battery combines a 3.7V nominal platform and 1000mAh rated capacity with a 7.0mm × 30mm × 48mm pouch format. Its moderate thickness and rectangular footprint give OEM teams a defined starting point for compact tracking, IoT and handheld products.
703048 LiPo BatteryApprox. 3.70Wh calculated energy in a 1000mAh-class pouch format
3.7V · 7.0mm × 30mm × 48mmProduct snapshot
A 1000mAh rectangular reference for 30mm × 48mm device layouts
The 703048 is a practical 1000mAh reference for devices that need a rectangular battery area without moving to a very thin or very long pouch format. A compact 1000mAh rectangular baseline with a moderate 7.0mm profile for straightforward energy and enclosure checks.
A 30mm × 48mm Rectangular Battery Pocket
The 7.0mm × 30mm × 48mm envelope gives teams a concrete reference for enclosure clearance, retention and cable routing.
3.7V · 1000mAhNominal voltage · rated capacity
≈20gCalculated weight reference
≈500 / 1000mACharge current · standard / rapid
≈200 / 1000mADischarge current · standard / maximum
Current, energy and weight values are calculated references for early planning. Confirm final limits and the finished battery configuration with ZERNE.
Technical data
703048 LiPo Battery Specifications
These specifications summarize the 703048 reference format. A compact 1000mAh rectangular baseline with a moderate 7.0mm profile for straightforward energy and enclosure checks. Confirm final construction, protection, connector and validation conditions for the finished OEM battery configuration.
| 703048 Mechanical and Electrical Specifications | |
|---|---|
| Product number | 703048 |
| Nominal voltage | 3.7V |
| Rated capacity | 1000mAh |
| Confirmed C-rate | 1C |
| Battery dimension | 7.0mm × 30mm × 48mm |
| Calculated Electrical References | |
| Standard charge current | Approx. 500mA |
| Rapid charge current | Approx. 1000mA |
| Standard discharge current | Approx. 200mA |
| Maximum discharge current | Approx. 1000mA |
| Calculated energy | Approx. 3.70Wh |
The direct 703048 values are used as the model reference. Current, energy and weight figures are calculated references rather than measured production results. Confirm the final charging profile, discharge demand, protection configuration, connector, tolerances and validation conditions with ZERNE for the finished device.
Product characteristics & advantages
Why Evaluate the 703048 1000mAh LiPo Battery?
The 703048 is a practical 1000mAh reference for devices that need a rectangular battery area without moving to a very thin or very long pouch format. A compact 1000mAh rectangular baseline with a moderate 7.0mm profile for straightforward energy and enclosure checks. The geometry and energy-planning tradeoff are the primary selection focus for this reference model.
The 703048 focuses on a familiar rectangular layout: a 1000mAh energy target, a 7.0mm profile and a 30mm × 48mm footprint that can be compared directly with a compact device enclosure.
1000mAh for Controlled Energy Planning
The capacity provides an accessible starting point for runtime, standby and duty-cycle discussions.
30mm × 48mm for Defined Enclosures
The footprint helps teams compare battery placement with PCB, display and connector positions.
7.0mm Profile to Review in the Stack-Up
Check the profile with cushioning, enclosure tolerances and any compression-sensitive components.
A Reference Rather Than a Fixed Catalog Limit
ZERNE can discuss alternate dimensions, connectors, protection and capacity around the finished device.
Battery calculation
Check 703048 Energy and Estimated Runtime
Use the prefilled 703048 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Runtime is an estimate, not guaranteed product performance.
3.70WhEstimated energy
6.66hEstimated runtime
How to Use the Result
The 703048 values are prefilled: 3.7V and 1000mAh. Adjust the load power and efficiency to compare different operating scenarios.
- Energy is estimated from nominal voltage and capacity
- Runtime estimate = energy × efficiency ÷ load power
- Actual runtime depends on load profile, cutoff, temperature and system losses
- Use sample testing to validate the final battery and device combination
Use the result as an initial estimate, then discuss charger validation and the final battery specification with ZERNE.
Integration guidance
Plan the 703048 Battery Around the 7.0mm × 30mm × 48mm Envelope
Reserve the stated battery pocket, allow for the 7.0mm thickness, review cable and connector access, and validate the charger, protection and finished load profile before production. Start with the 30mm × 48mm pocket and verify the 7.0mm profile against the PCB, display and housing ribs; leave room for the cable route and retention.
Reserve the 30mm × 48mm Battery Area
Allow space for the pouch cell, enclosure walls, cushioning, retention features, cable exit and service access around the listed footprint.
Check the 7.0mm Profile
Review compression risk, enclosure tolerances and adjacent components around the battery before finalizing the mechanical design.
Confirm Electrical and Protection Requirements
Use the calculated 500mA standard-charge, 1000mA rapid-charge, 200mA standard-discharge and 1000mA maximum-discharge references for early review, then validate the finished battery assembly.
Applications & solution paths
Applications for the 703048 1000mAh LiPo Battery
The 703048 format can be considered for products that match its 7.0mm × 30mm × 48mm envelope and 1000mAh energy target. A practical first comparison for compact trackers, sensors and connected devices whose duty cycle matches a 1000mAh-class target. Final suitability depends on device load, runtime, enclosure, charging and connector requirements.
01Mineral Trackers
The 1000 mAh reference can be assessed against long-duration tracking, communication bursts and the available 7.0 mm × 30 mm × 48 mm enclosure space.
View Mineral Trackers solutions →
02Game Controllers
The 1000 mAh reference can support early runtime planning in a game controller where grip, vibration load and service access affect the battery pocket.
View Game Controllers solutions →
03Walkie-Talkies
The 7.0 mm × 30 mm × 48 mm envelope can be checked beside the radio body, controls and antenna clearance when a rechargeable pack must fit a handheld enclosure.
View Walkie-Talkies solutions →
04Pet Feeders
The reference can support early review of connected pet-feeder layouts where motor demand, wireless standby and service access must be balanced.
View Pet Feeders solutions →The 703048 is positioned within ZERNE's 3.7V 1000–2000mAh lithium polymer battery range. Ask ZERNE to confirm the final construction, protection, connector, charging limits and validation plan for the required device.
Related technical articles
Technical Guidance for 703048 LiPo Integration
Use these resources to review the energy, geometry, current and safety questions most relevant to a 7.0mm × 30mm × 48mm pouch battery.
RuntimeHow Long Does a Lithium Polymer Battery Work?
Translate the capacity reference into a realistic runtime discussion using the actual device load and cutoff.
Read the technical guide →
TemperatureHow Temperature Affects the Performance of a LiPo Battery
Keep temperature, resistance, charging limits and the usable energy window in the final validation plan.
Read the technical guide →
SafetyWhy Do LiPo Batteries Explode and How to Prevent It
Review charging, handling, storage and protection considerations before integrating a lithium polymer battery.
Read the technical guide →OEM battery support
Start the 703048 Battery Inquiry with the Device Power Profile
A complete inquiry can include the required runtime, device load, 7.0mm × 30mm × 48mm battery pocket, charger, connector and documentation needed to evaluate this 1000mAh reference format. State the service interval, average and peak load, 30mm × 48mm pocket limits and any height-sensitive components.
Information to Include in Your Inquiry
Share the product conditions that determine how the 703048 format will fit and perform in the finished device, especially its battery pocket, load and charging window.
- Target runtime and duty cycle
- Voltage, capacity and battery pocket
- 7.0mm depth and enclosure clearance
- Charger and charging conditions
- Operating and storage environment
- Connector, quantity and approval timing
When the Reference Format Is Not Enough
ZERNE can discuss alternate capacity, geometry, protection, connector and assembly requirements when the 703048 specification does not match the finished product.
Discuss a Custom BatteryFAQ
703048 LiPo Battery Questions
Find answers about the 703048 3.7V 1000mAh lithium polymer battery, including its dimensions, calculated energy, current references and OEM integration considerations.
What Are the Dimensions of the 703048 LiPo Battery?
The 703048 battery measures 7.0mm in thickness, 30mm in width and 48mm in length.
What Capacity and Energy Does the 703048 Battery Provide?
The listed rated capacity is 1000mAh at a nominal voltage of 3.7V. The calculated energy is approximately 3.70Wh before system losses.
What Charge and Discharge Current References Apply to 703048?
The calculated references are approximately 500mA for standard charging, 1000mA for rapid charging, 200mA for standard discharge and 1000mA for maximum discharge. Confirm the final production limits and test conditions with ZERNE.
What Is the Approximate Weight of the 703048 Battery?
The calculated weight reference is approximately 20g. Final weight can vary with the completed battery configuration and should be confirmed during sampling.
How Should the 703048 Format Be Screened During Early Design?
A compact 1000mAh rectangular baseline with a moderate 7.0mm profile for straightforward energy and enclosure checks. Confirm the usable pocket and calculated electrical references before requesting samples.
What Is the Main Advantage of the 703048 Battery Format?
The 703048 provides a 1000mAh-class capacity in a 7.0mm × 30mm × 48mm pouch envelope, giving OEM teams a concrete starting point for product-space and energy planning.
Can the 703048 Battery Be Customized?
The 703048 is a reference model. ZERNE can discuss alternate capacity, dimensions, protection, connector and wiring requirements when the listed format does not match the finished product.
What Should Be Confirmed Before Integrating the 703048 Battery?
Review the stated battery area, 7.0mm depth, load profile, charging conditions, protection design, connector, cable exit and enclosure retention with ZERNE.
Lithium polymer battery inquiry
Review the 703048 Battery Fit with ZERNE
Share the application, runtime target, load profile, 7.0mm × 30mm × 48mm battery area, charging conditions and annual demand so ZERNE can recommend the right sample and validation path. State the service interval, average and peak load, 30mm × 48mm pocket limits and any height-sensitive components.
- Product model and target application
- Required voltage, capacity and runtime
- Battery-pocket dimensions and clearance
- Charger, connector and documentation needs