5.55Wh Calculated Energy for Extended Device Operation
The 3.7V nominal platform and 1500mAh rated capacity provide approximately 5.55Wh before system losses and application-specific derating.
3.7V Lithium Polymer Battery · 1000–2000mAh Range
3.7 V 1500mAh Lithium Polymer Battery 4025130
The 4025130 LiPo battery combines a 3.7V platform and 1500mAh rated capacity with an ultra-thin 4.0mm × 25mm × 130mm pouch format. Its long, narrow envelope is intended for early evaluation in products where battery length is available but thickness is tightly constrained.
402513025mm130mm4.0mm
40251301500mAh · 3.7V4.0mm × 25mm × 130mm
4025130 LiPo BatteryApprox. 5.55Wh calculated energy in a 1500mAh-class pouch format
3.7V · 4.0mm × 25mm × 130mm reference visualProduct snapshot
An ultra-thin, extended-length format for linear battery channels
The 4025130 is a packaging-led reference: 1500mAh capacity in a 4.0mm-thick, 130mm-long format for extended battery channels. A geometry-led option defined by its thin 4.0mm profile and extended 130mm length for linear battery channels.
A 25mm × 130mm Linear Battery Channel
The 4.0mm × 25mm × 130mm envelope can be evaluated for long housings, rails, handles and distributed internal battery placement.
3.7V · 1500mAhNominal voltage · rated capacity
≈30gCalculated weight reference
≈750 / 1500mACharge current · standard / rapid
≈300 / 1500mADischarge current · standard / maximum
Current, energy and weight values are calculated references for early planning. Confirm final limits and the finished battery configuration with ZERNE.
Technical data
4025130 LiPo Battery Specifications
These specifications summarize the 4025130 reference format. A geometry-led option defined by its thin 4.0mm profile and extended 130mm length for linear battery channels. Confirm final construction, protection, connector and validation conditions for the finished OEM battery configuration.
| 4025130 Mechanical and Electrical Specifications | |
|---|---|
| Product number | 4025130 |
| Nominal voltage | 3.7V |
| Rated capacity | 1500mAh |
| Confirmed C-rate | 1C |
| Battery dimension | 4.0mm × 25mm × 130mm |
| Listed internal resistance | 60mΩ |
| Calculated Electrical References | |
| Standard charge current | Approx. 750mA |
| Rapid charge current | Approx. 1500mA |
| Standard discharge current | Approx. 300mA |
| Maximum discharge current | Approx. 1500mA |
| Calculated energy | Approx. 5.55Wh |
The direct 4025130 values are used as the model reference. Current, energy and weight figures are calculated references rather than measured production results. Confirm the final charging profile, discharge demand, protection configuration, connector, tolerances and validation conditions with ZERNE for the finished device.
Product characteristics & advantages
Why Evaluate the 4025130 1500mAh LiPo Battery?
The 4025130 is a packaging-led reference: 1500mAh capacity in a 4.0mm-thick, 130mm-long format for extended battery channels. A geometry-led option defined by its thin 4.0mm profile and extended 130mm length for linear battery channels. The geometry and energy-planning tradeoff are the primary selection focus for this reference model.
The 4025130 is differentiated by its extreme length-to-thickness relationship. It can help teams examine whether a long, shallow battery channel offers more packaging freedom than a compact square pouch.
4.0mm for Depth-Limited Assemblies
The thin profile can help teams review product stacks where enclosure depth is the main constraint.
130mm for Distributed Battery Space
The long envelope provides a reference for rails, handles, edge channels and separated internal components.
A Defined Mid-Range Power Budget
The rated capacity supports early runtime and standby comparisons for products with a long available battery area.
60mΩ for Early Voltage-Drop Discussion
The listed resistance can frame initial load review; confirm the final cell and assembly behavior under the finished duty cycle.
Battery calculation
Check 4025130 Energy and Estimated Runtime
Use the prefilled 4025130 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Runtime is an estimate, not guaranteed product performance.
5.55WhEstimated energy
9.99hEstimated runtime
How to Use the Result
The 4025130 values are prefilled: 3.7V and 1500mAh. Adjust the load power and efficiency to compare different operating scenarios.
- Energy is estimated from nominal voltage and capacity
- Runtime estimate = energy × efficiency ÷ load power
- Actual runtime depends on load profile, cutoff, temperature and system losses
- Use sample testing to validate the final battery and device combination
Use the result as an initial estimate, then discuss charger validation and the final battery specification with ZERNE.
Integration guidance
Plan the 4025130 Battery Around the 4.0mm × 25mm × 130mm Envelope
Reserve the stated battery pocket, allow for the 4.0mm thickness, review cable and connector access, and validate the charger, protection and finished load profile before production. Confirm the full channel, support points, bend restrictions, connector exit and local compression conditions; validate the 4.0mm profile across the entire assembly.
Reserve the 25mm × 130mm Battery Area
Allow space for the pouch cell, enclosure walls, cushioning, retention features, cable exit and service access around the listed footprint.
Check the 4.0mm Profile
Review compression risk, enclosure tolerances and adjacent components around the battery before finalizing the mechanical design.
Confirm Electrical and Protection Requirements
Use the calculated 750mA standard-charge, 1500mA rapid-charge, 300mA standard-discharge and 1500mA maximum-discharge references for early review, then validate the finished battery assembly.
Applications & solution paths
Applications for the 4025130 1500mAh LiPo Battery
The 4025130 format can be considered for products that match its 4.0mm × 25mm × 130mm envelope and 1500mAh energy target. Can suit long handheld housings, rails and other products with a narrow extended path and a 1500mAh-class target. Final suitability depends on device load, runtime, enclosure, charging and connector requirements.
01Container Trackers
The 1500 mAh capacity can be compared with long reporting intervals and the available 4.0 mm × 25 mm × 130 mm enclosure space in a container-tracking device.
View Container Trackers solutions →
02Body-Worn Cameras
The 4.0 mm × 25 mm × 130 mm format can be assessed in a body-worn camera housing where camera placement, cable exit and operating time must be balanced.
View Body-Worn Cameras solutions →
03Blood Glucose Monitors
The 1500 mAh reference can support early runtime and portability comparisons in a blood glucose monitor; confirm sensing, charging and protection requirements.
View Blood Glucose Monitors solutions →
04TWS Earphones
The pouch can be compared with earbud or charging-case space, acoustic packaging and the intended listening duty cycle.
View TWS Earphones solutions →The 4025130 is positioned within ZERNE's 3.7V 1000–2000mAh lithium polymer battery range. Ask ZERNE to confirm the final construction, protection, connector, charging limits and validation plan for the required device.
Related technical articles
Technical Guidance for 4025130 LiPo Integration
Use these resources to review the energy, geometry, current and safety questions most relevant to a 4.0mm × 25mm × 130mm pouch battery.
Energy DensityWhat Is Energy Density in a Lithium Polymer Battery?
Review how watt-hours, capacity and physical volume work together when the battery must fit a defined enclosure.
Read the technical guide →
SafetyWhy Do LiPo Batteries Explode and How to Prevent It
Review charging, handling, storage and protection considerations before integrating a lithium polymer battery.
Read the technical guide →
TemperatureHow Temperature Affects the Performance of a LiPo Battery
Keep temperature, resistance, charging limits and the usable energy window in the final validation plan.
Read the technical guide →OEM battery support
Start the 4025130 Battery Inquiry with the Device Power Profile
A complete inquiry can include the required runtime, device load, 4.0mm × 25mm × 130mm battery pocket, charger, connector and documentation needed to evaluate this 1500mAh reference format. Provide a drawing of the 130mm channel, 25mm width, 4.0mm depth, retention method and installation constraints.
Information to Include in Your Inquiry
Share the product conditions that determine how the 4025130 format will fit and perform in the finished device, especially its battery pocket, load and charging window.
- Target runtime and duty cycle
- Voltage, capacity and battery pocket
- 4.0mm depth and enclosure clearance
- Charger and charging conditions
- Operating and storage environment
- Connector, quantity and approval timing
When the Reference Format Is Not Enough
ZERNE can discuss alternate capacity, geometry, protection, connector and assembly requirements when the 4025130 specification does not match the finished product.
Discuss a Custom BatteryFAQ
4025130 LiPo Battery Questions
Find answers about the 4025130 3.7V 1500mAh lithium polymer battery, including its dimensions, calculated energy, current references and OEM integration considerations.
What Are the Dimensions of the 4025130 LiPo Battery?
The 4025130 battery measures 4.0mm in thickness, 25mm in width and 130mm in length.
What Capacity and Energy Does the 4025130 Battery Provide?
The listed rated capacity is 1500mAh at a nominal voltage of 3.7V. The calculated energy is approximately 5.55Wh before system losses.
What Charge and Discharge Current References Apply to 4025130?
The calculated references are approximately 750mA for standard charging, 1500mA for rapid charging, 300mA for standard discharge and 1500mA for maximum discharge. Confirm the final production limits and test conditions with ZERNE.
What Is the Approximate Weight of the 4025130 Battery?
The calculated weight reference is approximately 30g. Final weight can vary with the completed battery configuration and should be confirmed during sampling.
What Internal Resistance Is Listed for the 4025130 Battery?
The supplied reference lists internal resistance of 60mΩ. Actual system behavior should be checked under the finished load, temperature and assembly conditions.
How Should the 4025130 Format Be Screened During Early Design?
A geometry-led option defined by its thin 4.0mm profile and extended 130mm length for linear battery channels. Confirm the usable pocket and calculated electrical references before requesting samples.
What Is the Main Advantage of the 4025130 Battery Format?
The 4025130 provides a 1500mAh-class capacity in a 4.0mm × 25mm × 130mm pouch envelope, giving OEM teams a concrete starting point for product-space and energy planning.
Can the 4025130 Battery Be Customized?
The 4025130 is a reference model. ZERNE can discuss alternate capacity, dimensions, protection, connector and wiring requirements when the listed format does not match the finished product.
What Should Be Confirmed Before Integrating the 4025130 Battery?
Review the stated battery area, 4.0mm depth, load profile, charging conditions, protection design, connector, cable exit and enclosure retention with ZERNE.
Lithium polymer battery inquiry
Review the 4025130 Battery Fit with ZERNE
Share the application, runtime target, load profile, 4.0mm × 25mm × 130mm battery area, charging conditions and annual demand so ZERNE can recommend the right sample and validation path. Provide a drawing of the 130mm channel, 25mm width, 4.0mm depth, retention method and installation constraints.
- Product model and target application
- Required voltage, capacity and runtime
- Battery-pocket dimensions and clearance
- Charger, connector and documentation needs