3.33Wh Calculated Energy for Early Runtime Planning
The confirmed 3.7V nominal voltage and 900mAh rated capacity provide approximately 3.33Wh before system losses, cutoff effects and application-specific derating.
3.7V Lithium Polymer Battery · 500–1000mAh Range
3.7 V 900mAh Lithium Polymer Battery 4022102
The 4022102 LiPo battery provides a 3.7V nominal platform and 900mAh rated capacity in a 4.0mm × 22mm × 102mm pouch format. An ultra-thin 900mAh format with a 4.0mm profile and 102mm length for extended battery channels.
402210222mm102mm4.0mm
4022102900mAh · 3.7V4.0mm × 22mm × 102mm
4022102 LiPo BatteryApprox. 3.33Wh calculated energy in a 900mAh-class pouch format
3.7V · 4.0mm × 22mm × 102mm reference visualProduct snapshot
A 900mAh ultra-thin extended reference for long handheld and rail-style products
The 4022102 model is positioned around ultra-thin extended geometry rather than capacity alone. It is suitable for early review of long handheld products, rails and slim enclosures with a linear battery path. An ultra-thin 900mAh format with a 4.0mm profile and 102mm length for extended battery channels.
A 22mm × 102mm Ultra-Thin Extended Footprint
The 4.0mm × 22mm × 102mm envelope supports early review of the battery pocket, enclosure depth, cushioning, retention and connector access.
Selection focus for 4022102
An ultra-thin 900mAh format with a 4.0mm profile and 102mm length for extended battery channels. The first engineering screen is the 22mm × 102mm plan area, followed by the 4.0mm stack-up and the 900mAh energy target. Treat this as a channel-design problem: verify support, edge protection, connector routing and compression across the entire 102mm length. For the device team, It is suitable for early review of long handheld products, rails and slim enclosures with a linear battery path. Send the full 102mm channel drawing, 22mm width, 4.0mm depth and retention details. This sequence keeps geometry, energy planning and electrical validation in one practical selection path.
3.7V · 900mAhNominal voltage · rated capacity
≈18gCalculated weight reference
≈450 / 900mACharge current · standard / rapid
≈180 / 900mADischarge current · standard / maximum
Current, energy and weight values are calculated references for early planning. Confirm final limits and the finished battery configuration with ZERNE.
Technical data
4022102 LiPo Battery Specifications
These specifications summarize the 4022102 reference format. An ultra-thin 900mAh format with a 4.0mm profile and 102mm length for extended battery channels. Confirm final construction, protection, connector and validation conditions for the finished OEM battery configuration.
| 4022102 Mechanical and Electrical Specifications | |
|---|---|
| Product number | 4022102 |
| Nominal voltage | 3.7V |
| Rated capacity | 900mAh |
| Confirmed C-rate | 1C |
| Battery dimension | 4.0mm × 22mm × 102mm |
| Listed internal resistance | 70mΩ |
| Calculated Electrical References | |
| Standard charge current | Approx. 450mA |
| Rapid charge current | Approx. 900mA |
| Standard discharge current | Approx. 180mA |
| Maximum discharge current | Approx. 900mA |
| Calculated energy | Approx. 3.33Wh |
The direct 4022102 values are used as the model reference. Current, energy and weight figures are calculated references rather than measured production results. Confirm the final charging profile, discharge demand, protection configuration, connector, tolerances and validation conditions with ZERNE for the finished device.
Product characteristics & advantages
Why Evaluate the 4022102 900mAh LiPo Battery?
The 4022102 model is positioned around ultra-thin extended geometry rather than capacity alone. It is suitable for early review of long handheld products, rails and slim enclosures with a linear battery path. An ultra-thin 900mAh format with a 4.0mm profile and 102mm length for extended battery channels. The geometry and energy-planning tradeoff are the primary selection focus for this reference model.
The 4022102 page focuses on the decision most relevant to this reference: An ultra-thin 900mAh format with a 4.0mm profile and 102mm length for extended battery channels. Its capacity, geometry, listed resistance and 1C family rate should be evaluated together with the finished device load and enclosure.
900mAh for Long Handheld And Rail-Style Products
The 900mAh rated capacity provides a defined basis for comparing runtime, standby intervals and service targets in long handheld and rail-style products.
22mm × 102mm Battery Footprint
The 4.0mm × 22mm × 102mm envelope gives engineering teams a concrete reference for enclosure clearance, retention, cable exit and component placement.
4.0mm Thickness to Check Early
Review the listed 4.0mm profile with housing tolerances, cushioning and nearby electronics before finalizing the battery pocket.
70mΩ Internal Resistance Reference
The listed 70mΩ resistance can support early voltage-drop discussion for this ultra-thin extended format; validate the finished battery under actual load and temperature conditions.
Battery calculation
Check 4022102 Energy and Estimated Runtime
Use the prefilled 4022102 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Runtime is an estimate, not guaranteed product performance.
3.33WhEstimated energy
5.99hEstimated runtime
How to Use the Result
The 4022102 values are prefilled: 3.7V and 900mAh. Adjust the load power and efficiency to compare different operating scenarios.
- Energy is estimated from nominal voltage and capacity
- Runtime estimate = energy × efficiency ÷ load power
- Actual runtime depends on load profile, cutoff, temperature and system losses
- Use sample testing to validate the final battery and device combination
Use the result as an initial estimate, then discuss charger validation and the final battery specification with ZERNE.
Integration guidance
Plan the 4022102 Battery Around the 4.0mm × 22mm × 102mm Envelope
Reserve the stated battery pocket, allow for the 4.0mm thickness, review cable and connector access, and validate the charger, protection and finished load profile before production. Treat this as a channel-design problem: verify support, edge protection, connector routing and compression across the entire 102mm length.
Reserve the 22mm × 102mm Battery Area
Allow space for the pouch cell, enclosure walls, cushioning, retention features, cable exit and service access around the listed footprint.
Check the 4.0mm Profile
Review compression risk, enclosure tolerances and adjacent components around the battery before finalizing the mechanical design.
Confirm Electrical and Protection Requirements
Use the calculated 450mA standard-charge, 900mA rapid-charge, 180mA standard-discharge and 900mA maximum-discharge references for early review, then validate the finished battery assembly.
Applications & solution paths
Applications for the 4022102 900mAh LiPo Battery
The 4022102 format can be considered for products that match its 4.0mm × 22mm × 102mm envelope and 900mAh energy target. It is suitable for early review of long handheld products, rails and slim enclosures with a linear battery path. Final suitability depends on device load, runtime, enclosure, charging and connector requirements.
01Bike Computer GPS
The compact 4 mm × 22 mm × 102 mm format can be compared with bike-computer display space, vibration exposure, cable routing and the expected ride interval.
View Bike Computer GPS solutions →
02PDA Machines
The 4 mm × 22 mm × 102 mm format can be assessed beside the display, scanner, controls and grip structure in a PDA enclosure.
View PDA Machines solutions →
03Sensors
The 900 mAh and 4 mm × 22 mm × 102 mm reference can be compared with sensing, wireless communication, standby time and enclosure constraints.
View Sensors solutions →
04Wearable Devices
The 4 mm × 22 mm × 102 mm pouch can be compared with wearable housing space, comfort, sensor placement and cable routing before finalizing the battery.
View Wearable Devices solutions →The 4022102 is positioned within ZERNE's 3.7V 500–1000mAh lithium polymer battery range. Ask ZERNE to confirm the final construction, protection, connector, charging limits and validation plan for the required device.
Related technical articles
Technical Guidance for 4022102 LiPo Integration
Use these resources to review the energy, geometry, current and safety questions most relevant to a 4.0mm × 22mm × 102mm pouch battery.
Energy DensityWhat Is Energy Density in a Lithium Polymer Battery?
Review how watt-hours, capacity and physical volume work together when the battery must fit a defined enclosure.
Read the technical guide →
RuntimeHow Long Does a Lithium Polymer Battery Work?
Translate the capacity reference into a realistic runtime discussion using the actual device load and cutoff.
Read the technical guide →
C-RatingWhat Is the C Rating of a LiPo Battery and Why It Matters
Relate device current demand to charge, discharge and protection planning before finalizing the battery configuration.
Read the technical guide →OEM battery support
Start the 4022102 Battery Inquiry with the Device Power Profile
A complete inquiry can include the required runtime, device load, 4.0mm × 22mm × 102mm battery pocket, charger, connector and documentation needed to evaluate this 900mAh reference format. Send the full 102mm channel drawing, 22mm width, 4.0mm depth and retention details.
Information to Include in Your Inquiry
Share the product conditions that determine how the 4022102 format will fit and perform in the finished device, especially its battery pocket, load and charging window.
- Target runtime and duty cycle
- Voltage, capacity and battery pocket
- 4.0mm depth and enclosure clearance
- Charger and charging conditions
- Operating and storage environment
- Connector, quantity and approval timing
When the Reference Format Is Not Enough
ZERNE can discuss alternate capacity, geometry, protection, connector and assembly requirements when the 4022102 specification does not match the finished product.
Discuss a Custom BatteryFAQ
4022102 LiPo Battery Questions
Find answers about the 4022102 3.7V 900mAh lithium polymer battery, including its dimensions, calculated energy, current references and OEM integration considerations.
What Are the Dimensions of the 4022102 LiPo Battery?
The 4022102 battery measures 4.0mm in thickness, 22mm in width and 102mm in length.
What Capacity and Energy Does the 4022102 Battery Provide?
The listed rated capacity is 900mAh at a nominal voltage of 3.7V. The calculated energy is approximately 3.33Wh before system losses.
What Charge and Discharge Current References Apply to 4022102?
The calculated references are approximately 450mA for standard charging, 900mA for rapid charging, 180mA for standard discharge and 900mA for maximum discharge. Confirm the final production limits and test conditions with ZERNE.
What Is the Approximate Weight of the 4022102 Battery?
The calculated weight reference is approximately 18g. Final weight can vary with the completed battery configuration and should be confirmed during sampling.
What Internal Resistance Is Listed for the 4022102 Battery?
The supplied reference lists internal resistance of 70mΩ. Actual system behavior should be checked under the finished load, temperature and assembly conditions.
How Should the 4022102 Format Be Screened During Early Design?
An ultra-thin 900mAh format with a 4.0mm profile and 102mm length for extended battery channels. Confirm the usable pocket and calculated electrical references before requesting samples.
What Is the Main Advantage of the 4022102 Battery Format?
The 4022102 provides a 900mAh-class capacity in a 4.0mm × 22mm × 102mm pouch envelope, giving OEM teams a concrete starting point for product-space and energy planning.
Can the 4022102 Battery Be Customized?
The 4022102 is a reference model. ZERNE can discuss alternate capacity, dimensions, protection, connector and wiring requirements when the listed format does not match the finished product.
What Should Be Confirmed Before Integrating the 4022102 Battery?
Review the stated battery area, 4.0mm depth, load profile, charging conditions, protection design, connector, cable exit and enclosure retention with ZERNE.
Lithium polymer battery inquiry
Review the 4022102 Battery Fit with ZERNE
Share the application, runtime target, load profile, 4.0mm × 22mm × 102mm battery area, charging conditions and annual demand so ZERNE can recommend the right sample and validation path. Send the full 102mm channel drawing, 22mm width, 4.0mm depth and retention details.
- Product model and target application
- Required voltage, capacity and runtime
- Battery-pocket dimensions and clearance
- Charger, connector and documentation needs