2.59Wh Calculated Energy for Early Runtime Planning
The confirmed 3.7V nominal voltage and 700mAh rated capacity provide approximately 2.59Wh before system losses, cutoff effects and application-specific derating.
3.7V Lithium Polymer Battery · 500–1000mAh Range
3.7 V 700mAh Lithium Polymer Battery 483046
The 483046 LiPo battery provides a 3.7V nominal platform and 700mAh rated capacity in a 4.8mm × 30mm × 46mm pouch format. A thin 700mAh format with a 4.8mm profile and 30mm × 46mm footprint.
48304630mm46mm4.8mm
483046700mAh · 3.7V4.8mm × 30mm × 46mm
483046 LiPo BatteryApprox. 2.59Wh calculated energy in a 700mAh-class pouch format
3.7V · 4.8mm × 30mm × 46mm reference visualProduct snapshot
A 700mAh thin broad reference for slim connected products
The 483046 model is positioned around thin broad geometry rather than capacity alone. It can be evaluated for slim connected products and compact handheld layouts with moderate planar width. A thin 700mAh format with a 4.8mm profile and 30mm × 46mm footprint.
A 30mm × 46mm Thin Broad Footprint
The 4.8mm × 30mm × 46mm envelope supports early review of the battery pocket, enclosure depth, cushioning, retention and connector access.
Selection focus for 483046
A thin 700mAh format with a 4.8mm profile and 30mm × 46mm footprint. The first engineering screen is the 30mm × 46mm plan area, followed by the 4.8mm stack-up and the 700mAh energy target. Check the 4.8mm stack-up and the 46mm length together; thinness does not remove the need for cushioning, retention and edge protection. For the device team, It can be evaluated for slim connected products and compact handheld layouts with moderate planar width. Provide the 30mm × 46mm pocket, 4.8mm depth, support method and peak-current requirements. This sequence keeps geometry, energy planning and electrical validation in one practical selection path.
3.7V · 700mAhNominal voltage · rated capacity
≈14gCalculated weight reference
≈350 / 700mACharge current · standard / rapid
≈140 / 700mADischarge current · standard / maximum
Current, energy and weight values are calculated references for early planning. Confirm final limits and the finished battery configuration with ZERNE.
Technical data
483046 LiPo Battery Specifications
These specifications summarize the 483046 reference format. A thin 700mAh format with a 4.8mm profile and 30mm × 46mm footprint. Confirm final construction, protection, connector and validation conditions for the finished OEM battery configuration.
| 483046 Mechanical and Electrical Specifications | |
|---|---|
| Product number | 483046 |
| Nominal voltage | 3.7V |
| Rated capacity | 700mAh |
| Confirmed C-rate | 1C |
| Battery dimension | 4.8mm × 30mm × 46mm |
| Listed internal resistance | 80mΩ |
| Calculated Electrical References | |
| Standard charge current | Approx. 350mA |
| Rapid charge current | Approx. 700mA |
| Standard discharge current | Approx. 140mA |
| Maximum discharge current | Approx. 700mA |
| Calculated energy | Approx. 2.59Wh |
The direct 483046 values are used as the model reference. Current, energy and weight figures are calculated references rather than measured production results. Confirm the final charging profile, discharge demand, protection configuration, connector, tolerances and validation conditions with ZERNE for the finished device.
Product characteristics & advantages
Why Evaluate the 483046 700mAh LiPo Battery?
The 483046 model is positioned around thin broad geometry rather than capacity alone. It can be evaluated for slim connected products and compact handheld layouts with moderate planar width. A thin 700mAh format with a 4.8mm profile and 30mm × 46mm footprint. The geometry and energy-planning tradeoff are the primary selection focus for this reference model.
The 483046 page focuses on the decision most relevant to this reference: A thin 700mAh format with a 4.8mm profile and 30mm × 46mm footprint. Its capacity, geometry, listed resistance and 1C family rate should be evaluated together with the finished device load and enclosure.
700mAh for Slim Connected Products
The 700mAh rated capacity provides a defined basis for comparing runtime, standby intervals and service targets in slim connected products.
30mm × 46mm Battery Footprint
The 4.8mm × 30mm × 46mm envelope gives engineering teams a concrete reference for enclosure clearance, retention, cable exit and component placement.
4.8mm Thickness to Check Early
Review the listed 4.8mm profile with housing tolerances, cushioning and nearby electronics before finalizing the battery pocket.
80mΩ Internal Resistance Reference
The listed 80mΩ resistance can support early voltage-drop discussion for this thin broad format; validate the finished battery under actual load and temperature conditions.
Battery calculation
Check 483046 Energy and Estimated Runtime
Use the prefilled 483046 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Runtime is an estimate, not guaranteed product performance.
2.59WhEstimated energy
4.66hEstimated runtime
How to Use the Result
The 483046 values are prefilled: 3.7V and 700mAh. Adjust the load power and efficiency to compare different operating scenarios.
- Energy is estimated from nominal voltage and capacity
- Runtime estimate = energy × efficiency ÷ load power
- Actual runtime depends on load profile, cutoff, temperature and system losses
- Use sample testing to validate the final battery and device combination
Use the result as an initial estimate, then discuss charger validation and the final battery specification with ZERNE.
Integration guidance
Plan the 483046 Battery Around the 4.8mm × 30mm × 46mm Envelope
Reserve the stated battery pocket, allow for the 4.8mm thickness, review cable and connector access, and validate the charger, protection and finished load profile before production. Check the 4.8mm stack-up and the 46mm length together; thinness does not remove the need for cushioning, retention and edge protection.
Reserve the 30mm × 46mm Battery Area
Allow space for the pouch cell, enclosure walls, cushioning, retention features, cable exit and service access around the listed footprint.
Check the 4.8mm Profile
Review compression risk, enclosure tolerances and adjacent components around the battery before finalizing the mechanical design.
Confirm Electrical and Protection Requirements
Use the calculated 350mA standard-charge, 700mA rapid-charge, 140mA standard-discharge and 700mA maximum-discharge references for early review, then validate the finished battery assembly.
Applications & solution paths
Applications for the 483046 700mAh LiPo Battery
The 483046 format can be considered for products that match its 4.8mm × 30mm × 46mm envelope and 700mAh energy target. It can be evaluated for slim connected products and compact handheld layouts with moderate planar width. Final suitability depends on device load, runtime, enclosure, charging and connector requirements.
01Personal Trackers
The 700 mAh capacity can be compared with location-reporting intervals, wearable comfort and the available 4.8 mm × 30 mm × 46 mm enclosure space.
View Personal Trackers solutions →
02Hearing Aids
The compact pouch can be reviewed against hearing-aid enclosure space, comfort, cable routing and the expected duty cycle.
View Hearing Aids solutions →
03Game Controllers
The 700 mAh reference can support early runtime planning in a game controller where grip, vibration load and service access affect the battery pocket.
View Game Controllers solutions →
04Sensors
The 700 mAh and 4.8 mm × 30 mm × 46 mm reference can be compared with sensing, wireless communication, standby time and enclosure constraints.
View Sensors solutions →The 483046 is positioned within ZERNE's 3.7V 500–1000mAh lithium polymer battery range. Ask ZERNE to confirm the final construction, protection, connector, charging limits and validation plan for the required device.
Related technical articles
Technical Guidance for 483046 LiPo Integration
Use these resources to review the energy, geometry, current and safety questions most relevant to a 4.8mm × 30mm × 46mm pouch battery.
TemperatureHow Temperature Affects the Performance of a LiPo Battery
Keep temperature, resistance, charging limits and the usable energy window in the final validation plan.
Read the technical guide →
C-RatingWhat Is the C Rating of a LiPo Battery and Why It Matters
Relate device current demand to charge, discharge and protection planning before finalizing the battery configuration.
Read the technical guide →
Energy DensityWhat Is Energy Density in a Lithium Polymer Battery?
Review how watt-hours, capacity and physical volume work together when the battery must fit a defined enclosure.
Read the technical guide →OEM battery support
Start the 483046 Battery Inquiry with the Device Power Profile
A complete inquiry can include the required runtime, device load, 4.8mm × 30mm × 46mm battery pocket, charger, connector and documentation needed to evaluate this 700mAh reference format. Provide the 30mm × 46mm pocket, 4.8mm depth, support method and peak-current requirements.
Information to Include in Your Inquiry
Share the product conditions that determine how the 483046 format will fit and perform in the finished device, especially its battery pocket, load and charging window.
- Target runtime and duty cycle
- Voltage, capacity and battery pocket
- 4.8mm depth and enclosure clearance
- Charger and charging conditions
- Operating and storage environment
- Connector, quantity and approval timing
When the Reference Format Is Not Enough
ZERNE can discuss alternate capacity, geometry, protection, connector and assembly requirements when the 483046 specification does not match the finished product.
Discuss a Custom BatteryFAQ
483046 LiPo Battery Questions
Find answers about the 483046 3.7V 700mAh lithium polymer battery, including its dimensions, calculated energy, current references and OEM integration considerations.
What Are the Dimensions of the 483046 LiPo Battery?
The 483046 battery measures 4.8mm in thickness, 30mm in width and 46mm in length.
What Capacity and Energy Does the 483046 Battery Provide?
The listed rated capacity is 700mAh at a nominal voltage of 3.7V. The calculated energy is approximately 2.59Wh before system losses.
What Charge and Discharge Current References Apply to 483046?
The calculated references are approximately 350mA for standard charging, 700mA for rapid charging, 140mA for standard discharge and 700mA for maximum discharge. Confirm the final production limits and test conditions with ZERNE.
What Is the Approximate Weight of the 483046 Battery?
The calculated weight reference is approximately 14g. Final weight can vary with the completed battery configuration and should be confirmed during sampling.
What Internal Resistance Is Listed for the 483046 Battery?
The supplied reference lists internal resistance of 80mΩ. Actual system behavior should be checked under the finished load, temperature and assembly conditions.
How Should the 483046 Format Be Screened During Early Design?
A thin 700mAh format with a 4.8mm profile and 30mm × 46mm footprint. Confirm the usable pocket and calculated electrical references before requesting samples.
What Is the Main Advantage of the 483046 Battery Format?
The 483046 provides a 700mAh-class capacity in a 4.8mm × 30mm × 46mm pouch envelope, giving OEM teams a concrete starting point for product-space and energy planning.
Can the 483046 Battery Be Customized?
The 483046 is a reference model. ZERNE can discuss alternate capacity, dimensions, protection, connector and wiring requirements when the listed format does not match the finished product.
What Should Be Confirmed Before Integrating the 483046 Battery?
Review the stated battery area, 4.8mm depth, load profile, charging conditions, protection design, connector, cable exit and enclosure retention with ZERNE.
Lithium polymer battery inquiry
Review the 483046 Battery Fit with ZERNE
Share the application, runtime target, load profile, 4.8mm × 30mm × 46mm battery area, charging conditions and annual demand so ZERNE can recommend the right sample and validation path. Provide the 30mm × 46mm pocket, 4.8mm depth, support method and peak-current requirements.
- Product model and target application
- Required voltage, capacity and runtime
- Battery-pocket dimensions and clearance
- Charger, connector and documentation needs