Higher Reserve in a Broad Footprint
The 4400mAh configuration provides a clear energy step above the 3Ah class while keeping a 60mm × 65mm plan area.
3.7 V Lithium Polymer Battery
3.7 V 4400mAh Lithium Polymer Battery 106065
The 106065 lipo battery provides a 4400mAh rated capacity in a 10mm × 60mm × 65mm pouch. Its approximately 16.28Wh calculated energy reference suits portable products that can accept a broad 60mm × 65mm battery area and a 10mm depth.
106065 LiPo Battery Reference10mm × 60mm × 65mm Format
3.7 V · ≈16.28WhProduct Snapshot
A Broad 4.4Ah Format for Higher-Energy Devices
The 106065 combines a larger capacity with a broad, nearly square plan area. It can help teams compare energy reserve, enclosure depth, approximate mass and service interval in a single rectangular battery bay.
Depth and Mass Need Equal Attention
The 10mm profile and approximately 88g weight influence enclosure height, retention, mounting and the finished product balance.
4400mAhRated Capacity
16.28WhCalculated Energy
88gApproximate Weight
60mm × 65mmBattery Footprint
Technical Data
106065 LiPo Battery Specifications
The table separates confirmed configuration data from calculated electrical references so the 106065 format can be reviewed quickly during product planning.
| 106065 Configuration and Mechanical Specifications | |
|---|---|
| Product number | 106065 |
| Nominal voltage | 3.7V |
| Rated capacity | 4400mAh min. / 4410mAh typ. |
| Battery dimensions | 10mm × 60mm × 65mm |
| Approximate battery weight | Approx. 88g |
| Lithium battery PCM | Yes |
| NTC | No |
| Configuration | 1S1P |
| Confirmed Electrical Specifications | |
| Operating voltage range | 2.75V to 4.20V |
| Maximum charge voltage | 4.2V ±50mV |
| Maximum charge current | 2200mA |
| Discharge current | 4400mA |
| Discharge cut-off | 2.75V |
| Internal impedance | <200mΩ |
| Expected cycle life | 500 cycles ≥80% @ 0.5C/0.5C, 23±5°C |
| Calculated Electrical References | |
| Standard charge current | Approx. 2200mA |
| Rapid charge current | Approx. 4400mA |
| Standard discharge current | Approx. 880mA |
| Maximum discharge current | Approx. 4400mA |
| Calculated energy | Approx. 16.28Wh |
Confirmed configuration data is presented separately from calculated planning references. Current and energy values are approximate references, not measured limits; internal impedance and confirmed charge/discharge values should be validated with the finished battery, protection system and load profile.
Product Characteristics & Advantages
Broad 4.4Ah Reserve for Portable Equipment: Why Evaluate the 106065 LiPo Battery?
The 106065 owns the broad 4.4Ah comparison point in this group. Its 10mm depth, 60mm × 65mm area, approximately 88g weight and confirmed electrical references make it relevant to portable products with a more generous battery bay.
The 106065 owns the broad 4.4Ah comparison point in this group. Its 10mm depth, 60mm × 65mm area, approximately 88g weight and confirmed electrical references make it relevant to portable products with a more generous battery bay. The calculated electrical references provide a structured starting point for charger, load and protection discussions, while the final battery remains a configurable OEM design.
4400mAh for Longer Active Sessions
Use the capacity and calculated energy to compare service intervals, not to promise a fixed runtime without the finished load profile.
60mm × 65mm for Broad Placement
The near-square plan area can be easier to allocate beside a board, display or power-management section.
10mm Enclosure Boundary
Review the cell, cushioning, protection and connector together inside the actual 10mm-class stack-up.
Approx. 88g for Product Balance
Include the confirmed approximate weight in mounting, drop and user-handling discussions.
Defined 2200mA Charge Reference
The confirmed charge and discharge values provide starting points for charger, protection and power-path review.
Battery Calculation
Check 106065 Energy and Estimated Runtime
Use the prefilled 106065 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Approx. 2200mA is the approximate standard-charge reference for 4400mAh.
16.28WhEstimated Energy
—Estimated Runtime
—Ideal Charge Time
How to Use the Result
The 106065 reference values are prefilled: 3.7 V, 4400mAh and a standard-charge reference of approximately 2200mA. Adjust the load power and efficiency to compare operating scenarios; the calculator does not infer safe limits from capacity alone.
- Energy = voltage × capacity ÷ 1000
- Runtime estimate = energy × efficiency ÷ load power
- Ideal charge time = capacity ÷ entered charge current
- Actual runtime depends on load profile, temperature, cutoff and system losses
Use the result for early comparison, then confirm the charger, protection, connector and final battery specification through sample testing.
Integration Guidance
Place the 106065 in a Broad, Supported Battery Pocket
The 106065 should be checked as a broad rectangular power source. Confirm the 10mm depth, 60mm × 65mm pocket, support area, connector position and actual load before finalizing the mechanical design.
Use the Broad Area Deliberately
A 60mm × 65mm footprint can sit beside a display or board, but it needs support across the pouch and a clear cable route.
Keep the 10mm Stack-Up Realistic
Add cushioning, protection and connector height when the available device depth is compared with the nominal cell dimension.
Link Energy to Duty Cycle
The approximately 16.28Wh reference supports early comparison, while usable output depends on cutoff, load, temperature and system losses.
Confirm the Charge Path
The confirmed 2200mA maximum charge and 4400mA discharge references should be reviewed with the final charger and protection design.
The stated dimensions and calculated values are reference inputs for design planning. Confirm the finished battery drawing, tolerance, protection, connector and test conditions before production release.
Applications & Solutions
Applications for the Broad 106065 LiPo Battery
The 106065 can be evaluated in portable products that need a broad battery bay, a 4.4Ah energy target and a clear enclosure-depth discussion.
01Portable ECG Monitors
The broad 60mm × 65mm pocket can support longer measurement intervals when the device can allocate 10mm depth and approximately 88g mass.
View Portable ECG Battery Solutions →
02Handheld Instruments
The 4400mAh target can be compared with active handheld sessions where grip balance, board placement and a broad battery support area matter.
View Handheld Device Solutions →
03Security Cameras
The energy reference may support extended standby and wireless activity when the camera enclosure can provide the required area, support and protection.
View Security Camera Battery Solutions →These application paths are starting points for OEM evaluation. Final suitability depends on actual load, runtime, temperature, protection, connector and assembly requirements.
Related Technical Articles
Guidance for 106065 Battery Selection
Use these technical guides to connect the 106065 geometry, energy target, current references and finished-device requirements.
Energy PlanningWhat Is Energy Density in a Lithium Polymer Battery?
Use energy-density guidance to relate the 16.28Wh reference to the 10mm × 60mm × 65mm envelope.
Read the energy planning guide →
Current DemandWhat Is the C Rating of a LiPo Battery and Why It Matters
Compare the 2200mA charge and 4400mA discharge references with actual device demand and protection.
Read the current demand guide →
Operating ConditionsHow Temperature Affects the Performance of a LiPo Battery
Check how temperature can influence capacity, resistance, charging and usable operating windows.
Read the operating conditions guide →OEM Battery Support
Review the 106065 Broad Battery Bay with ZERNE
Share the 60mm × 65mm pocket, 10mm depth, weight limit, runtime target, load profile and connector route so the 4.4Ah reference can be evaluated for the finished product.
Useful RFQ Inputs
Include the conditions that determine whether this reference is suitable for the finished product.
- 60mm × 65mm pocket and 10mm depth
- 4400mAh target and approximately 16.28Wh energy
- 2200mA charge and 4400mA discharge references
- Approx. 88g weight, protection, connector and samples
When the Broad 4.4Ah Format Needs Adjustment
ZERNE can review a thinner, smaller, higher-capacity or custom battery configuration when the 106065 area, depth or weight does not fit the device.
Discuss a Custom BatteryFAQ
106065 LiPo Battery Questions
Find answers about the 106065 3.7 V 4400mAh lithium polymer battery, including its dimensions, energy reference, confirmed electrical data and OEM integration path.
What are the dimensions of the 106065 LiPo battery?
The 106065 reference is 10mm × 60mm × 65mm in thickness × width × length order. Allow additional space for cushioning, PCM, leads, connector, retention and the finished assembly.
How much energy does the 106065 battery provide?
At 3.7 V nominal voltage and a 4400mAh rated capacity, the calculated energy is approximately 16.28Wh before cutoff, load, temperature, resistance, protection and system losses.
What current references are shown for 106065?
The table includes Approx. 2200mA standard charge, Approx. 4400mA rapid charge, Approx. 880mA standard discharge and Approx. 4400mA maximum discharge planning references. The confirmed product specification separately lists 2200mA maximum charge and 4400mA discharge references; confirm the final safe limits for the completed battery.
What is the main 106065 packaging point?
The 106065 uses a 10mm × 60mm × 65mm format and approximately 88g; the broad area, depth and support method should be confirmed together.
How should the 16.28Wh reference be used?
Use it for early runtime and service-interval comparison. Confirm the actual usable energy with load, cutoff, temperature, resistance and conversion losses.
Can ZERNE customize the 106065 battery configuration?
Yes. Share the required pocket, depth, runtime, load profile, charging conditions, connector, protection, environment, quantity and documentation needs for a configuration review.
Technical Inquiry
Discuss the 106065 4.4Ah Battery Fit
Include the 60mm × 65mm pocket, 10mm depth, 88g weight allowance, runtime, load, charger and connector requirements so ZERNE can review the 4400mAh configuration.
- 4400mAh target and approximately 16.28Wh calculated energy
- 10mm depth and broad 60mm × 65mm support area
- 2200mA charge and 4400mA discharge references
- Approx. 88g weight and complete connector plan