High Capacity with a Defined Long Footprint
The 6200mAh configuration provides a clear energy starting point for products that need fewer recharge intervals and can allocate a 66mm × 104mm battery area.
3.7 V Lithium Polymer Battery
3.7 V 6200mAh Lithium Polymer Battery 8066104
The 8066104 lipo battery combines a 6200mAh rated capacity with an 8mm × 66mm × 104mm pouch format. Its approximately 22.94Wh calculated energy reference is intended for OEM designs that need a broad battery bay and a longer operating interval.
8066104 LiPo Battery Reference8mm × 66mm × 104mm Format
3.7 V · ≈22.94WhProduct Snapshot
A 6.2Ah Reference for Extended Runtime Planning
The 8066104 places a high energy target in a long, broad pouch. The 8mm depth, 66mm width and 104mm length should be reviewed together with the housing, retention system, connector route and the finished device load.
Mechanical Space Is Part of the Energy Decision
The long pouch can support a higher reserve, but the enclosure must allow distributed support, cable access and a controlled 8mm stack-up.
6200mAhRated Capacity
22.94WhCalculated Energy
124gApproximate Weight
66mm × 104mmBattery Footprint
Technical Data
8066104 LiPo Battery Specifications
The table separates confirmed configuration data from calculated electrical references so the 8066104 format can be reviewed quickly during product planning.
| 8066104 Configuration and Mechanical Specifications | |
|---|---|
| Product number | 8066104 |
| Nominal voltage | 3.7V |
| Rated capacity | 6200mAh min. / 6210mAh typ. |
| Battery dimensions | 8mm × 66mm × 104mm |
| Approximate battery weight | Approx. 124g |
| Lithium battery PCM | Yes |
| NTC | No |
| Configuration | 1S1P |
| Confirmed Electrical Specifications | |
| Operating voltage range | 2.75V to 4.20V |
| Maximum charge voltage | 4.2V ±50mV |
| Maximum charge current | 3100mA |
| Discharge current | 6200mA |
| Discharge cut-off | 2.75V |
| Internal impedance | <200mΩ |
| Expected cycle life | 500 cycles ≥80% @ 0.5C/0.5C, 23±5°C |
| Calculated Electrical References | |
| Standard charge current | Approx. 3100mA |
| Rapid charge current | Approx. 6200mA |
| Standard discharge current | Approx. 1240mA |
| Maximum discharge current | Approx. 6200mA |
| Calculated energy | Approx. 22.94Wh |
Confirmed configuration data is presented separately from calculated planning references. Current and energy values are approximate references, not measured limits; internal impedance and confirmed charge/discharge values should be validated with the finished battery, protection system and load profile.
Product Characteristics & Advantages
Large Energy Reserve for Long-Interval Portable Equipment: Why Evaluate the 8066104 LiPo Battery?
The 8066104 is differentiated by energy reserve and physical scale. Its confirmed 124g approximate weight, 8mm depth and 66mm × 104mm plan area make it a system-level packaging choice rather than a capacity-only selection.
The 8066104 is differentiated by energy reserve and physical scale. Its confirmed 124g approximate weight, 8mm depth and 66mm × 104mm plan area make it a system-level packaging choice rather than a capacity-only selection. The calculated electrical references provide a structured starting point for charger, load and protection discussions, while the final battery remains a configurable OEM design.
6.2Ah for Longer Service Intervals
Use the rated capacity and calculated energy to compare field runtime, recharge frequency and the actual duty cycle of the finished equipment.
A Broad 66mm × 104mm Battery Bay
The large plan area needs stable support and a clean cable route so the pouch is not treated as an unsupported insert.
Approx. 124g in the Product Budget
Include the confirmed approximate weight when reviewing mounting, balance, drop performance and operator handling.
Defined Charge and Discharge Boundaries
The confirmed 3100mA maximum charge and 6200mA discharge references give the power team concrete starting points for charger and load review.
500-Cycle Reference Under Stated Conditions
The confirmed cycle-life reference can guide the test discussion, while actual life depends on load, temperature, cutoff and charging conditions.
Battery Calculation
Check 8066104 Energy and Estimated Runtime
Use the prefilled 8066104 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Approx. 3100mA is the approximate standard-charge reference for 6200mAh.
22.94WhEstimated Energy
—Estimated Runtime
—Ideal Charge Time
How to Use the Result
The 8066104 reference values are prefilled: 3.7 V, 6200mAh and a standard-charge reference of approximately 3100mA. Adjust the load power and efficiency to compare operating scenarios; the calculator does not infer safe limits from capacity alone.
- Energy = voltage × capacity ÷ 1000
- Runtime estimate = energy × efficiency ÷ load power
- Ideal charge time = capacity ÷ entered charge current
- Actual runtime depends on load profile, temperature, cutoff and system losses
Use the result for early comparison, then confirm the charger, protection, connector and final battery specification through sample testing.
Integration Guidance
Integrate the 8066104 Around a Broad, Long Battery Bay
The 8066104 should be evaluated as a complete high-energy assembly. Start with the 8mm depth and 66mm × 104mm pocket, then review support, connector access, load profile and service interval together.
Support the Full Pouch Area
Use the long footprint to plan distributed support and avoid local compression around the cell, leads or protection assembly.
Keep Energy and Mass Visible
The approximately 22.94Wh reference and 124g weight should be carried into runtime, mounting and handling discussions.
Coordinate the Power Path
Compare the confirmed 3100mA charge and 6200mA discharge references with the charger, protection device, wiring and peak load.
Validate the Operating Window
The 2.75V to 4.20V operating range and 2.75V cutoff should be checked against the finished device and protection strategy.
The stated dimensions and calculated values are reference inputs for design planning. Confirm the finished battery drawing, tolerance, protection, connector and test conditions before production release.
Applications & Solutions
Applications for the 8066104 High-Capacity LiPo Battery
The 8066104 is suited to application reviews where a long, broad battery pocket can support higher reserve. These routes focus on runtime, mass, electronics access and the real enclosure rather than capacity alone.
01Portable ECG Monitors
The 8mm × 66mm × 104mm envelope and 22.94Wh reference can support longer measurement sessions when the product can reserve a broad battery bay and manage the approximately 124g mass.
View Portable ECG Battery Solutions →
02Vehicle Tracking Devices
The 6200mAh capacity can be compared with long service intervals and communication activity in vehicle equipment, subject to the final load, protection and environmental review.
View GPS Tracking Solutions →
03Portable Printers
The high-capacity format can support repeated print sessions where motor pulses, service interval and a long internal battery route are evaluated together.
View Portable Printer Battery Solutions →These application paths are starting points for OEM evaluation. Final suitability depends on actual load, runtime, temperature, protection, connector and assembly requirements.
Related Technical Articles
Guidance for 8066104 Battery Selection
Use these technical guides to connect the 8066104 geometry, energy target, current references and finished-device requirements.
Energy PlanningWhat Is Energy Density in a Lithium Polymer Battery?
Relate the 8066104 energy reference to device load, physical volume and usable runtime rather than treating nominal watt-hours as guaranteed output.
Read the energy planning guide →
Current DemandWhat Is the C Rating of a LiPo Battery and Why It Matters
Use current-demand guidance to compare the confirmed charge/discharge references with startup demand, wiring and protection.
Read the current demand guide →
Service LifeWhat Is Battery Cycle Life and How It Affects Longevity
Review the confirmed cycle-life reference alongside temperature, cutoff, load profile and charging conditions.
Read the service life guide →OEM Battery Support
Review the 8066104 Energy and Weight Budget with ZERNE
Share the 66mm × 104mm pocket, 8mm depth, operating interval, load profile and weight limit so the 6.2Ah reference can be assessed as a complete battery assembly.
Useful RFQ Inputs
Include the conditions that determine whether this reference is suitable for the finished product.
- Target runtime and duty cycle
- 66mm × 104mm pocket, 8mm depth and retention method
- 3100mA charge and 6200mA discharge references
- 124g approximate weight and device balance
- Connector, protection, samples and quantity
When the Large Reference Needs Adjustment
ZERNE can review capacity, dimensions, protection, connector and assembly requirements when the 8066104 format is too large, too heavy or not aligned with the final power path.
Discuss a Custom BatteryFAQ
8066104 LiPo Battery Questions
Find answers about the 8066104 3.7 V 6200mAh lithium polymer battery, including its dimensions, energy reference, confirmed electrical data and OEM integration path.
What are the dimensions of the 8066104 LiPo battery?
The 8066104 reference is 8mm × 66mm × 104mm in thickness × width × length order. Allow additional space for cushioning, PCM, leads, connector, retention and the finished assembly.
How much energy does the 8066104 battery provide?
At 3.7 V nominal voltage and a 6200mAh rated capacity, the calculated energy is approximately 22.94Wh before cutoff, load, temperature, resistance, protection and system losses.
What current references are shown for 8066104?
The table includes Approx. 3100mA standard charge, Approx. 6200mA rapid charge, Approx. 1240mA standard discharge and Approx. 6200mA maximum discharge planning references. The confirmed product specification separately lists 3100mA maximum charge and 6200mA discharge references; confirm the final safe limits for the completed battery.
How much energy does the 8066104 provide?
At 3.7 V nominal voltage and a 6200mAh rated capacity, the calculated energy is approximately 22.94Wh before cutoff, load, temperature, resistance, protection and system losses.
What is the key packaging issue with 8066104?
The 8mm × 66mm × 104mm format and approximately 124g mass require distributed support, a controlled cable route and a mounting review across the full pouch area.
Can ZERNE customize the 8066104 battery configuration?
Yes. Share the required pocket, depth, runtime, load profile, charging conditions, connector, protection, environment, quantity and documentation needs for a configuration review.
Technical Inquiry
Review the 8066104 Runtime, Mass and Battery Bay
Include the 66mm × 104mm pocket, 8mm depth, runtime target, peak load, charger, connector and weight limit so ZERNE can review the 6200mAh configuration accurately.
- 6200mAh target and approximately 22.94Wh calculated energy
- 8mm depth with full-area support
- 3100mA charge and 6200mA discharge references
- 124g approximate weight, connector and test plan