More Energy in a Contained Footprint
The 3000mAh configuration offers a step above small compact cells while keeping the plan area below the broader 4.4Ah and 6.2Ah alternatives.
3.7 V Lithium Polymer Battery
3.7 V 3000mAh Lithium Polymer Battery 104656
The 104656 lipo battery combines a 3000mAh rated capacity with a 10mm × 46mm × 56mm pouch. Its approximately 11.10Wh calculated energy reference fits product designs that need a compact high-energy rectangle without the length of larger 4.4Ah and 6.2Ah formats.
104656 LiPo Battery Reference10mm × 46mm × 56mm Format
3.7 V · ≈11.10WhProduct Snapshot
A Compact 3Ah Reference for Portable Systems
The 104656 delivers a 3000mAh target in a 46mm × 56mm plan area. It is positioned around compact energy reserve, a 10mm depth boundary and a clear footprint for portable products.
A 10mm Package for Enclosure Review
The product team should check the pouch, cushioning, protection, connector and board clearance against the actual 10mm-class pocket.
3000mAhRated Capacity
11.10WhCalculated Energy
10mmCell Thickness
46mm × 56mmBattery Footprint
Technical Data
104656 LiPo Battery Specifications
The table separates confirmed configuration data from calculated electrical references so the 104656 format can be reviewed quickly during product planning.
| 104656 Configuration and Mechanical Specifications | |
|---|---|
| Product number | 104656 |
| Nominal voltage | 3.7V |
| Rated capacity | 3000mAh min. / 3010mAh typ. |
| Battery dimensions | 10mm × 46mm × 56mm |
| Approximate battery weight | Approx. 60g |
| Lithium battery PCM | Yes |
| NTC | No |
| Configuration | 1S1P |
| Confirmed Electrical Specifications | |
| Operating voltage range | 2.75V to 4.20V |
| Maximum charge voltage | 4.2V ±50mV |
| Maximum charge current | 1500mA |
| Discharge current | 3000mA |
| Discharge cut-off | 2.75V |
| Internal impedance | <200mΩ |
| Expected cycle life | 500 cycles ≥80% @ 0.5C/0.5C, 23±5°C |
| Calculated Electrical References | |
| Standard charge current | Approx. 1500mA |
| Rapid charge current | Approx. 3000mA |
| Standard discharge current | Approx. 600mA |
| Maximum discharge current | Approx. 3000mA |
| Calculated energy | Approx. 11.10Wh |
Confirmed configuration data is presented separately from calculated planning references. Current and energy values are approximate references, not measured limits; internal impedance and confirmed charge/discharge values should be validated with the finished battery, protection system and load profile.
Product Characteristics & Advantages
Compact 3Ah Reserve in a 46mm-By-56mm Footprint: Why Evaluate the 104656 LiPo Battery?
The 104656 owns a compact 3Ah position: 10mm thickness, 46mm × 56mm plan area, approximately 60g weight and 11.10Wh calculated energy. It is a practical comparison point when a product needs more reserve without a long battery route.
The 104656 owns a compact 3Ah position: 10mm thickness, 46mm × 56mm plan area, approximately 60g weight and 11.10Wh calculated energy. It is a practical comparison point when a product needs more reserve without a long battery route. The calculated electrical references provide a structured starting point for charger, load and protection discussions, while the final battery remains a configurable OEM design.
3000mAh for Portable Runtime Planning
Use the energy target to compare the real device duty cycle, display use, wireless activity and recharge interval.
46mm × 56mm for Contained Placement
The compact rectangle can fit beside a board or mechanism when a longer 60mm-plus route is difficult.
10mm with a Complete-Assembly Review
Include cushioning, PCM, connector height and tolerance in the final battery pocket.
Approx. 60g for Portable Balance
Carry the confirmed approximate weight into mounting, drop and handling decisions.
1500mA Charge Reference
The confirmed charge and discharge values help structure the early charger, protection and wiring discussion.
Battery Calculation
Check 104656 Energy and Estimated Runtime
Use the prefilled 104656 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Approx. 1500mA is the approximate standard-charge reference for 3000mAh.
11.10WhEstimated Energy
—Estimated Runtime
—Ideal Charge Time
How to Use the Result
The 104656 reference values are prefilled: 3.7 V, 3000mAh and a standard-charge reference of approximately 1500mA. Adjust the load power and efficiency to compare operating scenarios; the calculator does not infer safe limits from capacity alone.
- Energy = voltage × capacity ÷ 1000
- Runtime estimate = energy × efficiency ÷ load power
- Ideal charge time = capacity ÷ entered charge current
- Actual runtime depends on load profile, temperature, cutoff and system losses
Use the result for early comparison, then confirm the charger, protection, connector and final battery specification through sample testing.
Integration Guidance
Place the 104656 Between Compact and High-Reserve Designs
The 104656 should be compared by its 46mm × 56mm footprint and 10mm depth. Review how the compact rectangle sits beside the PCB, display, connector and enclosure support.
Use the Contained Footprint
The 46mm × 56mm area can simplify placement when a broad 60mm-plus battery bay is not available.
Keep the 10mm Stack-Up Honest
Measure the finished assembly with cushioning, PCM, leads and connector rather than using the bare pouch dimension as the complete requirement.
Translate 11.10Wh Carefully
The calculated energy is a planning reference; validate usable energy with load, cutoff, temperature and conversion losses.
Coordinate Charging and Discharge
Compare the confirmed 1500mA charge and 3000mA discharge references with the charger, protection and actual device demand.
The stated dimensions and calculated values are reference inputs for design planning. Confirm the finished battery drawing, tolerance, protection, connector and test conditions before production release.
Applications & Solutions
Applications for the Compact 104656 LiPo Battery
The 104656 can be evaluated in portable devices that need a contained 3Ah battery bay, moderate mass and enough energy for active sessions or longer standby.
01Portable Printers
The 3000mAh target can be compared with print-session duty and motor pulses while the 46mm × 56mm pocket is checked against the housing.
View Portable Printer Battery Solutions →
02Handheld Diagnostic Instruments
The compact plan area and approximately 60g reference can support handheld layouts where board placement, grip balance and connector access matter.
View Handheld Device Solutions →
03Security Cameras
The 11.10Wh reference can be evaluated for standby and wireless activity when the camera housing can provide 10mm depth and protected support.
View Security Camera Battery Solutions →These application paths are starting points for OEM evaluation. Final suitability depends on actual load, runtime, temperature, protection, connector and assembly requirements.
Related Technical Articles
Guidance for 104656 Battery Selection
Use these technical guides to connect the 104656 geometry, energy target, current references and finished-device requirements.
Energy PlanningWhat Is Energy Density in a Lithium Polymer Battery?
Relate the 11.10Wh reference to the contained 46mm × 56mm footprint and 10mm profile.
Read the energy planning guide →
Current DemandWhat Is the C Rating of a LiPo Battery and Why It Matters
Compare the 1500mA charge and 3000mA discharge references with actual load and protection.
Read the current demand guide →
Operating ConditionsHow Temperature Affects the Performance of a LiPo Battery
Review how temperature can affect usable capacity, resistance and charge acceptance in the finished enclosure.
Read the operating conditions guide →OEM Battery Support
Review the 104656 Compact 3Ah Battery Bay
Share the 46mm × 56mm pocket, 10mm depth, 60g weight allowance, runtime, load profile and connector route so the 3000mAh format can be evaluated.
Useful RFQ Inputs
Include the conditions that determine whether this reference is suitable for the finished product.
- 46mm × 56mm pocket and 10mm depth
- 3000mAh target and approximately 11.10Wh energy
- 1500mA charge and 3000mA discharge references
- Approx. 60g weight, PCM, connector and sample plan
When the Compact 3Ah Format Needs Adjustment
ZERNE can review a shorter, thinner, higher-capacity or custom configuration when the 104656 footprint, depth or energy target does not match the finished product.
Discuss a Custom BatteryFAQ
104656 LiPo Battery Questions
Find answers about the 104656 3.7 V 3000mAh lithium polymer battery, including its dimensions, energy reference, confirmed electrical data and OEM integration path.
What are the dimensions of the 104656 LiPo battery?
The 104656 reference is 10mm × 46mm × 56mm in thickness × width × length order. Allow additional space for cushioning, PCM, leads, connector, retention and the finished assembly.
How much energy does the 104656 battery provide?
At 3.7 V nominal voltage and a 3000mAh rated capacity, the calculated energy is approximately 11.10Wh before cutoff, load, temperature, resistance, protection and system losses.
What current references are shown for 104656?
The table includes Approx. 1500mA standard charge, Approx. 3000mA rapid charge, Approx. 600mA standard discharge and Approx. 3000mA maximum discharge planning references. The confirmed product specification separately lists 1500mA maximum charge and 3000mA discharge references; confirm the final safe limits for the completed battery.
Why compare 104656 with 114050?
The 114050 uses a smaller 40mm × 50mm plan area but a deeper 11mm profile, making it useful when length and width are tighter than depth.
Does the 104656 product image match this configuration?
Yes. The image is marked ZN-104656 and shows the 3.7 V 3000mAh configuration used on this page.
Can ZERNE customize the 104656 battery configuration?
Yes. Share the required pocket, depth, runtime, load profile, charging conditions, connector, protection, environment, quantity and documentation needs for a configuration review.
Technical Inquiry
Discuss the 104656 Compact 3Ah Battery
Include the 46mm × 56mm pocket, 10mm depth, 60g weight allowance, operating interval, load, charger and connector needs so ZERNE can review the complete 3000mAh configuration.
- 3000mAh target and approximately 11.10Wh calculated energy
- 10mm depth and contained 46mm × 56mm footprint
- 1500mA charge and 3000mA discharge references
- ZN-104656 image, PCM, connector and sample validation