Short Plan Area for Compact Placement
The 40mm × 50mm footprint can fit around a board or mechanism when length is limited and the product architecture has a deeper battery pocket.
3.7 V Lithium Polymer Battery
3.7 V 2400mAh Lithium Polymer Battery 114050
The 114050 lipo battery provides a 2400mAh rated capacity in an 11mm × 40mm × 50mm pouch. Its approximately 8.88Wh calculated energy reference suits compact products that have limited length but can accept a deeper battery stack-up.
114050 LiPo Battery Reference11mm × 40mm × 50mm Format
3.7 V · ≈8.88WhProduct Snapshot
A Short Footprint with an 11mm Depth Trade-Off
The 114050 concentrates 2400mAh into a 40mm × 50mm plan area. It is a useful reference when the product cannot spare a long battery route but has enough depth to review an 11mm pouch and its finished assembly.
Depth Is the Central Selection Axis
The 11mm profile must be reviewed with cushioning, PCM, connector height, enclosure wall and service access.
2400mAhRated Capacity
11mmCell Thickness
8.88WhCalculated Energy
40mm × 50mmBattery Footprint
Technical Data
114050 LiPo Battery Specifications
The table separates confirmed configuration data from calculated electrical references so the 114050 format can be reviewed quickly during product planning.
| 114050 Configuration and Mechanical Specifications | |
|---|---|
| Product number | 114050 |
| Nominal voltage | 3.7V |
| Rated capacity | 2400mAh min. / 2410mAh typ. |
| Battery dimensions | 11mm × 40mm × 50mm |
| Approximate battery weight | Approx. 48g |
| Lithium battery PCM | Yes |
| NTC | No |
| Configuration | 1S1P |
| Confirmed Electrical Specifications | |
| Operating voltage range | 2.75V to 4.20V |
| Maximum charge voltage | 4.2V ±50mV |
| Maximum charge current | 1200mA |
| Discharge current | 2400mA |
| Discharge cut-off | 2.75V |
| Internal impedance | <200mΩ |
| Expected cycle life | 500 cycles ≥80% @ 0.5C/0.5C, 23±5°C |
| Calculated Electrical References | |
| Standard charge current | Approx. 1200mA |
| Rapid charge current | Approx. 2400mA |
| Standard discharge current | Approx. 480mA |
| Maximum discharge current | Approx. 2400mA |
| Calculated energy | Approx. 8.88Wh |
Confirmed configuration data is presented separately from calculated planning references. Current and energy values are approximate references, not measured limits; internal impedance and confirmed charge/discharge values should be validated with the finished battery, protection system and load profile.
Product Characteristics & Advantages
High-Capacity Energy in a Short, Deep 40mm-By-50mm Pocket: Why Evaluate the 114050 LiPo Battery?
The 114050 owns the short, deep 2.4Ah option in this group. Its confirmed approximately 48g weight, 11mm depth and 40mm × 50mm area should be compared with products that value compact plan area over a thin stack-up.
The 114050 owns the short, deep 2.4Ah option in this group. Its confirmed approximately 48g weight, 11mm depth and 40mm × 50mm area should be compared with products that value compact plan area over a thin stack-up. The calculated electrical references provide a structured starting point for charger, load and protection discussions, while the final battery remains a configurable OEM design.
40mm × 50mm for Short Placement
The compact plan area can leave more room along the device length for controls, connectors or a board extension.
11mm as the Main Trade-Off
Review the complete assembly height, cushioning and protection rather than using the nominal pouch depth alone.
2400mAh for a Compact Reserve
Use the approximately 8.88Wh reference to compare the operating window with the actual load and cutoff.
Approx. 48g in the Product Budget
Include the confirmed approximate weight in mounting, balance and drop discussions.
PCM and 1S1P Configuration
The confirmed configuration provides a clear starting point for protection and connection review.
Battery Calculation
Check 114050 Energy and Estimated Runtime
Use the prefilled 114050 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Approx. 1200mA is the approximate standard-charge reference for 2400mAh.
8.88WhEstimated Energy
—Estimated Runtime
—Ideal Charge Time
How to Use the Result
The 114050 reference values are prefilled: 3.7 V, 2400mAh and a standard-charge reference of approximately 1200mA. Adjust the load power and efficiency to compare operating scenarios; the calculator does not infer safe limits from capacity alone.
- Energy = voltage × capacity ÷ 1000
- Runtime estimate = energy × efficiency ÷ load power
- Ideal charge time = capacity ÷ entered charge current
- Actual runtime depends on load profile, temperature, cutoff and system losses
Use the result for early comparison, then confirm the charger, protection, connector and final battery specification through sample testing.
Integration Guidance
Use the 114050 When Length Is Tighter Than Depth
The 114050 should be evaluated inside a short, deep cavity. Confirm the 40mm × 50mm pocket, 11mm stack-up, cable route, connector height and surrounding electronics before selecting it.
Check the Actual Stack-Up
Add cushioning, PCM, leads and connector clearance to the 11mm nominal dimension when measuring the product cavity.
Keep the Short Footprint Useful
Place the 40mm × 50mm area beside the board or mechanism so the battery does not obstruct controls or service access.
Review the Energy Target
The approximately 8.88Wh reference helps compare operating windows, but actual usable energy depends on cutoff, load, temperature and conversion losses.
Confirm the Power Path
The confirmed 1200mA charge and 2400mA discharge references should be reviewed with charger, protection and wiring.
The stated dimensions and calculated values are reference inputs for design planning. Confirm the finished battery drawing, tolerance, protection, connector and test conditions before production release.
Applications & Solutions
Applications for the Short-Format 114050 LiPo Battery
The 114050 can be evaluated in compact products that need a short battery pocket and can accept an 11mm profile, including access-control, networking and portable equipment.
01Smart Door Locks
The 40mm × 50mm pocket can be compared with compact lock housings where mechanism clearance is more important than a long battery channel.
View Smart Door Lock Battery Solutions →
02WiFi Routers
The 2400mAh reference can support a portable networking review where backup interval, board placement and a short battery area must be balanced.
View WiFi Router Battery Solutions →
03Portable Printers
The compact plan area can be considered in a small printer housing when motor pulses, depth and connector access are checked together.
View Portable Printer Battery Solutions →These application paths are starting points for OEM evaluation. Final suitability depends on actual load, runtime, temperature, protection, connector and assembly requirements.
Related Technical Articles
Guidance for 114050 Battery Selection
Use these technical guides to connect the 114050 geometry, energy target, current references and finished-device requirements.
Energy PlanningWhat Is Energy Density in a Lithium Polymer Battery?
Compare the 8.88Wh reference with the short 40mm × 50mm plan area and 11mm depth.
Read the energy planning guide →
Current DemandWhat Is the C Rating of a LiPo Battery and Why It Matters
Use the confirmed 1200mA charge and 2400mA discharge references in charger and load planning.
Read the current demand guide →
Operating ConditionsHow Temperature Affects the Performance of a LiPo Battery
Review temperature effects when a deep pouch sits near electronics or enclosed product surfaces.
Read the operating conditions guide →OEM Battery Support
Review the 114050 Short, Deep Battery Pocket
Share the 40mm × 50mm bay, 11mm depth allowance, operating interval, load, charger, connector route and service clearance so the 2400mAh configuration can be assessed.
Useful RFQ Inputs
Include the conditions that determine whether this reference is suitable for the finished product.
- 40mm × 50mm pocket and 11mm stack-up
- 2400mAh target and approximately 8.88Wh energy
- 1200mA charge and 2400mA discharge references
- Approx. 48g weight, PCM, connector and samples
When the Short Format Needs a Different Depth
ZERNE can review a thinner, longer, higher-capacity or custom configuration when the 114050 pocket is not compatible with the final enclosure or runtime target.
Discuss a Custom BatteryFAQ
114050 LiPo Battery Questions
Find answers about the 114050 3.7 V 2400mAh lithium polymer battery, including its dimensions, energy reference, confirmed electrical data and OEM integration path.
What are the dimensions of the 114050 LiPo battery?
The 114050 reference is 11mm × 40mm × 50mm in thickness × width × length order. Allow additional space for cushioning, PCM, leads, connector, retention and the finished assembly.
How much energy does the 114050 battery provide?
At 3.7 V nominal voltage and a 2400mAh rated capacity, the calculated energy is approximately 8.88Wh before cutoff, load, temperature, resistance, protection and system losses.
What current references are shown for 114050?
The table includes Approx. 1200mA standard charge, Approx. 2400mA rapid charge, Approx. 480mA standard discharge and Approx. 2400mA maximum discharge planning references. The confirmed product specification separately lists 1200mA maximum charge and 2400mA discharge references; confirm the final safe limits for the completed battery.
What is the main trade-off of 114050?
The 114050 keeps a short 40mm × 50mm plan area but uses an 11mm depth and approximately 48g; check finished assembly height and support.
Does the 114050 product image match this configuration?
Yes. The image is marked ZN-114050 and shows the 3.7 V 2400mAh configuration used on this page.
Can ZERNE customize the 114050 battery configuration?
Yes. Share the required pocket, depth, runtime, load profile, charging conditions, connector, protection, environment, quantity and documentation needs for a configuration review.
Technical Inquiry
Discuss the 114050 Short-Format 2.4Ah Battery
Include the 40mm × 50mm pocket, 11mm depth, 48g weight allowance, runtime, power profile and connector requirements so ZERNE can review the short battery route.
- 2400mAh target and approximately 8.88Wh calculated energy
- 11mm depth and short 40mm × 50mm footprint
- 1200mA charge and 2400mA discharge references
- ZN-114050 image, PCM, connector and sample plan