Why Evaluate the 321447 Format?
A 3.2mm thickness gives the mechanical team a concrete depth boundary, while the 14mm × 47mm plan area follows a long internal channel in a compact product.
3.7 V Lithium Polymer Battery
3.7 V 180mAh Lithium Polymer Battery 321447
The 321447 LiPo battery places a 180mAh rated capacity in a 3.2mm × 14mm × 47mm linear envelope. Its approximately 0.67Wh energy reference gives compact OEM products a clear starting point when length is available but cell depth is tightly limited.
321447 LiPo Battery Reference3.2mm × 14mm × 47mm Format
3.7 V · ≈0.67WhProduct Snapshot
A 3.2mm Profile for Long, Narrow Battery Channels
The 321447 format is defined by its thin profile and 47mm length rather than by capacity alone. It can help a design team compare a narrow battery route, lead exit and 180mAh energy target before the housing is finalized.
Use the Capacity with the Channel Design
The 180mAh rating is a starting point for low-power duty cycles. Compare it with reporting frequency, active sessions and the available charging interval instead of treating capacity as a runtime guarantee.
180mAhRated Capacity
0.67WhCalculated Energy
3.2mmCell Thickness
170mΩInternal Resistance
Technical Data
321447 LiPo Battery Specifications
The table separates confirmed configuration data from calculated electrical references so the 321447 format can be reviewed quickly during product planning.
| Mechanical and Electrical Specifications | |
|---|---|
| Product number | 321447 |
| Nominal voltage | 3.7 V |
| Rated capacity | 180mAh |
| Battery dimensions | 3.2mm × 14mm × 47mm |
| Approximate battery weight | Approx. 3.6g |
| C-rate | 1C |
| Internal resistance | 170mΩ |
| Calculated Electrical References | |
| Standard charge current | Approx. 90mA |
| Rapid charge current | Approx. 180mA |
| Standard discharge current | Approx. 36mA |
| Maximum discharge current | Approx. 180mA |
| Calculated energy | Approx. 0.67Wh |
Approximate weight follows the 3.7 V LiPo family reference. Current and energy values are calculated planning references, while internal resistance is a supplied reference; confirm the final charger, protection and load specification for the finished battery.
Product Characteristics & Advantages
Ultra-Thin Long-Channel Integration: Why Evaluate the 321447 LiPo Battery?
The 321447 is a thin linear reference for products where a long pocket is easier to provide than additional enclosure depth. The configuration keeps the selection discussion centered on depth, cable routing, energy planning and the listed 170mΩ resistance.
The 321447 is a thin linear reference for products where a long pocket is easier to provide than additional enclosure depth. The configuration keeps the selection discussion centered on depth, cable routing, energy planning and the listed 170mΩ resistance. The calculated electrical references provide a structured starting point for charger, load and protection discussions, while the final battery remains a configurable OEM design.
3.2mm for Shallow Enclosure Stacks
The thin cell profile can preserve room for a board, display or housing wall, provided the finished assembly also has cushioning and retention clearance.
47mm for a Linear Pocket
The long plan dimension can follow an enclosure edge or internal rail, with the lead exit placed to protect the board-side connection path.
0.67Wh for Low-Power Planning
The calculated energy supports early comparison of standby time, periodic communication and short active sessions.
170mΩ for Voltage-Drop Review
The listed resistance gives the electrical team a reference point for startup behavior and voltage-drop discussion; the finished assembly still requires validation.
Approx. 3.6g Family Reference
The calculated mass is useful in a preliminary portable-device budget, while final weight depends on leads, protection and connector details.
Battery Calculation
Check 321447 Energy and Estimated Runtime
Use the prefilled 321447 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Approx. 90mA is the approximate standard-charge reference for 180mAh.
0.67WhEstimated Energy
—Estimated Runtime
—Ideal Charge Time
How to Use the Result
The 321447 reference values are prefilled: 3.7 V, 180mAh and a standard-charge reference of approximately 90mA. Adjust the load power and efficiency to compare operating scenarios; the calculator does not infer safe limits from capacity alone.
- Energy = voltage × capacity ÷ 1000
- Runtime estimate = energy × efficiency ÷ load power
- Ideal charge time = capacity ÷ entered charge current
- Actual runtime depends on load profile, temperature, cutoff and system losses
Use the result for early comparison, then confirm the charger, protection, connector and final battery specification through sample testing.
Integration Guidance
Integrate the 321447 Battery Along a 47mm Pocket
The 321447 should be checked as a long, shallow battery assembly. Review the 3.2mm depth, 14mm width, 47mm length and lead path together with the 180mAh operating target.
Protect the Shallow Stack-Up
Reserve more than the 3.2mm cell dimension for cushioning, tolerance and the finished protection arrangement; avoid compression from housing ribs.
Use the Length to Free Board Space
A 47mm channel may allow the cell to sit beside the PCB, but confirm end retention and cable bend radius before the enclosure is released.
Relate Energy to the Duty Cycle
Use approximately 0.67Wh to compare reporting intervals and active load. Cutoff voltage, temperature and system losses determine the usable window.
Review Resistance Under Load
The listed 170mΩ value can guide early voltage-drop questions, but peak current, connector resistance and final protection must be checked on the complete battery.
The stated dimensions and calculated values are reference inputs for design planning. Confirm the finished battery drawing, tolerance, protection, connector and test conditions before production release.
Applications & Solutions
Applications for the 321447 Linear LiPo Battery
The 321447 format can be evaluated in compact products that provide a narrow, elongated battery route and need a modest energy reserve without adding much depth.
01GPS Card Battery Devices
The 3.2mm profile and 47mm length are a useful starting point for GPS card products that need a slim, elongated battery pocket and scheduled location updates.
View GPS Card Battery Solutions →
02Reading Pens
The long, narrow envelope can be compared with a reading-pen housing where the battery channel runs along the device body and connector access is concentrated at one end.
View Reading Pen Battery Solutions →
03Personal Trackers
The 180mAh reference supports an early comparison for personal trackers balancing a compact pocket, periodic radio activity and a defined operating interval.
View Personal Tracker Battery Solutions →These application paths are starting points for OEM evaluation. Final suitability depends on actual load, runtime, temperature, protection, connector and assembly requirements.
Related Technical Articles
Guidance for 321447 Battery Selection
These guides help connect the thin linear format with current demand, energy planning and temperature-dependent battery behavior.
Current DemandWhat Is the C Rating of a LiPo Battery and Why It Matters
Relate the 321447 resistance and calculated current references to actual startup and communication loads.
Read the current demand guide →
Energy PlanningWhat Is Energy Density in a Lithium Polymer Battery?
Compare the 0.67Wh reference with the long, shallow space available inside the enclosure.
Read the energy planning guide →
Operating ConditionsHow Temperature Affects the Performance of a LiPo Battery
Review how temperature can change capacity, resistance and charging behavior in the final product.
Read the operating conditions guide →OEM Battery Support
Start the 321447 Inquiry with the Battery Channel
Share the available 14mm × 47mm pocket, 3.2mm depth, operating interval and connector route so the 180mAh reference can be assessed in the finished device.
Useful RFQ Inputs
A useful RFQ links the narrow pocket with the actual load profile and the connection arrangement.
- 14mm × 47mm channel and depth clearance
- 180mAh energy target and duty cycle
- Continuous and peak load profile
- Charger, protection and resistance conditions
- Lead exit, connector and retention
- Samples, quantity and documentation needs
When the Linear Format Needs Adjustment
ZERNE can review another capacity, thickness, length, connector or protection arrangement when the 321447 pocket does not match the final product.
Discuss a Custom BatteryFAQ
321447 LiPo Battery Questions
Find answers about the 321447 3.7 V 180mAh lithium polymer battery, including its long thin format, calculated energy, resistance and integration path.
What are the dimensions of the 321447 LiPo battery?
The 321447 reference is specified as 3.2mm × 14mm × 47mm in thickness × width × length order. Allow additional room for cushioning, retention, leads, connector and protection.
How much energy does the 321447 battery provide?
The rated capacity is 180mAh at a nominal voltage of 3.7 V. The calculated energy is approximately 0.67Wh before cutoff, load, temperature, resistance, protection and system losses.
What is the approximate weight of the 321447 battery?
Using the 3.7 V LiPo family weight reference, the 180mAh configuration is approximately 3.6g. Finished weight depends on leads, connector, protection and assembly details.
What current references apply to the 321447 configuration?
The calculated current references are approximately 90mA standard charge, 180mA rapid charge, 36mA standard discharge and 180mA maximum discharge. Confirm the final safe limits for the completed battery.
What is the main packaging value of 321447?
The 321447 reference is only 3.2mm thick and 47mm long, so it is most useful when the device offers a narrow linear channel but limited depth.
Can the 321447 be adapted for a different connector or lead exit?
ZERNE can review connector, cable, protection and assembly requirements around the 321447 envelope as part of a custom OEM discussion.
Technical Inquiry
Review the 321447 Linear Battery Fit with ZERNE
Share the 47mm battery channel, depth clearance, load profile and required operating interval so the 180mAh format can be reviewed with the charger and connector plan.
- 3.2mm depth and 14mm × 47mm pocket
- 180mAh target and operating interval
- Load, charger and resistance conditions
- Connector, samples and production plan