Why Evaluate the 500935 Format?
The 9mm width can fit a slim edge channel, while the 35mm length provides more plan area than a micro-short cell without creating a broad pocket.
3.7 V Lithium Polymer Battery
3.7 V 115mAh Lithium Polymer Battery 500935
The 500935 LiPo battery combines a 115mAh rated capacity with a slim 5.0mm × 9mm × 35mm linear format. Its approximately 0.43Wh energy reference gives compact OEM products a narrow battery-pocket option when width is more constrained than length.
500935 LiPo Battery Reference5.0mm × 9mm × 35mm Format
3.7 V · ≈0.43WhProduct Snapshot
A 9mm-Wide Cell for Narrow Device Channels
The 500935 format is narrow and moderately long, creating a different packaging path from short compact cells. It gives designers a defined 115mAh reference for products with a 35mm internal battery route.
Use the Narrow Profile with the Duty Cycle
The 115mAh capacity and approximately 0.43Wh calculated energy should be compared with standby demand, update frequency and the required charging interval.
115mAhRated Capacity
0.43WhCalculated Energy
5.0mmCell Thickness
150mΩInternal Resistance
Technical Data
500935 LiPo Battery Specifications
The table separates confirmed configuration data from calculated electrical references so the 500935 format can be reviewed quickly during product planning.
| Mechanical and Electrical Specifications | |
|---|---|
| Product number | 500935 |
| Nominal voltage | 3.7 V |
| Rated capacity | 115mAh |
| Battery dimensions | 5.0mm × 9mm × 35mm |
| Approximate battery weight | Approx. 2.3g |
| C-rate | 1C |
| Internal resistance | 150mΩ |
| Calculated Electrical References | |
| Standard charge current | Approx. 57.5mA |
| Rapid charge current | Approx. 115mA |
| Standard discharge current | Approx. 23mA |
| Maximum discharge current | Approx. 115mA |
| Calculated energy | Approx. 0.43Wh |
Approximate weight follows the 3.7 V LiPo family reference. Current and energy values are calculated planning references, while internal resistance is a supplied reference; confirm the final charger, protection and load specification for the finished battery.
Product Characteristics & Advantages
Slim 9mm-Wide Linear Format: Why Evaluate the 500935 LiPo Battery?
The 500935 is a width-led reference for compact products that need a narrow pouch rather than a broad square cell. Its 5.0mm thickness, 35mm length and 150mΩ resistance establish the key mechanical and electrical questions.
The 500935 is a width-led reference for compact products that need a narrow pouch rather than a broad square cell. Its 5.0mm thickness, 35mm length and 150mΩ resistance establish the key mechanical and electrical questions. The calculated electrical references provide a structured starting point for charger, load and protection discussions, while the final battery remains a configurable OEM design.
9mm for a Narrow Battery Channel
The slim width can help preserve space for a board, optical path or housing wall in a small device.
35mm for Linear Placement
The length gives more energy room than a micro-short format while staying suitable for an edge-mounted battery pocket.
0.43Wh for Low-Power Operation
The calculated energy supports early comparison of standby, periodic communication and short active sessions.
150mΩ for Load Planning
The listed resistance can be considered in startup and voltage-drop review, with the complete battery path still requiring validation.
Approx. 2.3g Family Reference
The derived weight is useful for a portable-device estimate while final leads, connector and protection may change the assembled result.
Battery Calculation
Check 500935 Energy and Estimated Runtime
Use the prefilled 500935 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Approx. 57.5mA is the approximate standard-charge reference for 115mAh.
0.43WhEstimated Energy
—Estimated Runtime
—Ideal Charge Time
How to Use the Result
The 500935 reference values are prefilled: 3.7 V, 115mAh and a standard-charge reference of approximately 57.5mA. Adjust the load power and efficiency to compare operating scenarios; the calculator does not infer safe limits from capacity alone.
- Energy = voltage × capacity ÷ 1000
- Runtime estimate = energy × efficiency ÷ load power
- Ideal charge time = capacity ÷ entered charge current
- Actual runtime depends on load profile, temperature, cutoff and system losses
Use the result for early comparison, then confirm the charger, protection, connector and final battery specification through sample testing.
Integration Guidance
Integrate the 500935 Battery Along a Narrow Edge Channel
The 500935 should be reviewed as a 9mm-wide linear battery. Check the 5.0mm depth, 35mm length, lead exit and 115mAh operating target against the device stack-up.
Keep the Width Constraint Visible
Reserve the 9mm cell width plus the clearance needed for insulation, cushioning and housing tolerance near the channel wall.
Route the Cable at the Channel End
The 35mm length can follow an enclosure edge, but the connector and bend radius should be reserved before the board layout is fixed.
Compare 0.43Wh with the Active Window
Use the calculated energy to screen standby and communication patterns, recognizing that cut-off and system losses affect usable energy.
Check Resistance Under Burst Load
The 150mΩ listing can frame early voltage-margin questions when the product contains radios, motors or display wake events.
The stated dimensions and calculated values are reference inputs for design planning. Confirm the finished battery drawing, tolerance, protection, connector and test conditions before production release.
Applications & Solutions
Applications for the 500935 Slim Linear LiPo Battery
The 500935 can be evaluated in compact products with a narrow, 35mm-long battery route and a low-to-moderate energy requirement.
01Reading Pens
The 5mm × 9mm × 35mm envelope is a natural starting point for reading pens with a long internal battery channel and end-mounted electronics.
View Reading Pen Battery Solutions →
02Translation Pens
The 115mAh reference can be compared with translation-pen housings where screen, microphone, speaker and battery length must be coordinated.
View Translation Pen Battery Solutions →
03Personal Trackers
The long 35mm format can also be screened for slim personal trackers that need a defined battery rail and periodic wireless communication.
View Personal Tracker Battery Solutions →These application paths are starting points for OEM evaluation. Final suitability depends on actual load, runtime, temperature, protection, connector and assembly requirements.
Related Technical Articles
Guidance for 500935 Battery Selection
These resources help align a slim linear battery with current demand, energy planning and operating temperature.
Energy PlanningWhat Is Energy Density in a Lithium Polymer Battery?
Compare the 0.43Wh reference with a 9mm-wide, 35mm-long battery channel.
Read the energy planning guide →
Current DemandWhat Is the C Rating of a LiPo Battery and Why It Matters
Use the 150mΩ value to frame startup and radio-burst questions.
Read the current demand guide →
Operating ConditionsHow Temperature Affects the Performance of a LiPo Battery
Review temperature and charging conditions along a narrow edge-mounted cell.
Read the operating conditions guide →OEM Battery Support
Start the 500935 Inquiry with the Narrow Channel
Share the 9mm × 35mm pocket, 5.0mm depth, duty cycle and connector path so the 115mAh reference can be assessed in the actual enclosure.
Useful RFQ Inputs
The RFQ should make the width constraint and the available cable-exit space explicit.
- 9mm × 35mm channel and 5.0mm depth
- 115mAh target and runtime
- Standby, active and peak load
- Charger, protection and temperature conditions
- Connector, lead route and retention
- Samples, quantity and documentation needs
When a Narrower or Longer Cell Is Needed
ZERNE can compare a shorter compact model, a same-width capacity step or a custom linear geometry when the 500935 channel does not match the finished product.
Discuss a Custom BatteryFAQ
500935 LiPo Battery Questions
Find answers about the 500935 3.7 V 115mAh lithium polymer battery, including its narrow 9mm width, calculated energy, resistance and linear integration path.
What are the dimensions of the 500935 LiPo battery?
The 500935 reference is specified as 5.0mm × 9mm × 35mm in thickness × width × length order. Allow additional room for cushioning, retention, leads, connector and protection.
How much energy does the 500935 battery provide?
The rated capacity is 115mAh at a nominal voltage of 3.7 V. The calculated energy is approximately 0.43Wh before cutoff, load, temperature, resistance, protection and system losses.
What is the approximate weight of the 500935 battery?
Using the 3.7 V LiPo family weight reference, the 115mAh configuration is approximately 2.3g. Finished weight depends on leads, connector, protection and assembly details.
What current references apply to the 500935 configuration?
The calculated current references are approximately 57.5mA standard charge, 115mA rapid charge, 23mA standard discharge and 115mA maximum discharge. Confirm the final safe limits for the completed battery.
What is the key mechanical feature of 500935?
The 500935 is 5.0mm thick, 9mm wide and 35mm long, so it is primarily a narrow-channel reference rather than a broad compact pouch.
How should the 115mAh capacity be evaluated?
Compare the 0.43Wh calculated energy with standby demand, active sessions, communication frequency, cut-off voltage and the required recharge interval.
Technical Inquiry
Review the 500935 Narrow Battery Channel with ZERNE
Share the 9mm-wide pocket, length clearance, target operating interval and load profile so the 115mAh configuration can be reviewed with the connector and charger plan.
- 5.0mm depth and 9mm × 35mm pocket
- 115mAh target and operating interval
- Load, charger and 150mΩ resistance conditions
- Connector, samples and production plan