Thin Profile, Defined Energy Target
The 6mm thickness helps teams screen shallow housings while the 850mAh capacity provides a clear starting point for standby and active-load planning.
3.7V Lithium Polymer Battery
3.7 V 850mAh Lithium Polymer Battery 603048
The 603048 lipo battery combines an 850mAh rated capacity with a 6mm-thick, 30mm × 48mm rectangular format. Its approximately 3.15Wh energy reference and slim depth give OEM teams a practical starting point for long-pocket products where enclosure height and operating interval must be balanced.
603048 LiPo Battery Reference6mm × 30mm × 48mm Format
3.7V · ≈3.15WhProduct Snapshot
A Slim 603048 Format for Long Battery Pockets
The 603048 reference places an 850mAh energy target inside a 6mm profile and a 30mm × 48mm footprint. This combination is useful when a product has a defined linear pocket but limited depth for the cell, cushioning and cable route.
Long Rectangular Integration Path
The 30mm × 48mm footprint can be compared with a device pocket that is longer than it is wide, leaving room to review retention and connector access along the enclosure edge.
850mAhRated Capacity
3.15WhCalculated Energy
6mmCell Thickness
30mm × 48mmPlan Area
Technical Data
603048 LiPo Battery Specifications
The table separates confirmed configuration data from calculated electrical references so the 603048 format can be reviewed quickly during product planning.
| Mechanical and Electrical Specifications | |
|---|---|
| Product Number | 603048 |
| Nominal Voltage | 3.7V |
| Rated Capacity | 850mAh |
| Battery Dimension | 6mm × 30mm × 48mm |
| Approximate Battery Weight | Approx. 17g |
| Calculated Electrical References | |
| Standard Charge Current | Approx. 425mA |
| Rapid Charge Current | Approx. 850mA |
| Standard Discharge Current | Approx. 170mA |
| Maximum Discharge Current | Approx. 850mA |
| Calculated Energy | Approx. 3.15Wh |
Approximate weight uses the approved 3.7V LiPo family reference. Current and energy values are calculated planning references, not measured limits; confirm the final charger, protection and load specification for the finished battery.
Product Characteristics & Advantages
Slim Long-Format Power: Why Evaluate the 603048 LiPo Battery?
The 603048 is best evaluated as a slim rectangular reference rather than as a capacity number alone. Its approximate 17g family weight reference, 6mm thickness and calculated current values help the mechanical and electrical teams discuss the same starting configuration before samples are built.
The 603048 is best evaluated as a slim rectangular reference rather than as a capacity number alone. Its approximate 17g family weight reference, 6mm thickness and calculated current values help the mechanical and electrical teams discuss the same starting configuration before samples are built. The calculated electrical references provide a structured starting point for charger, load and protection discussions, while the final battery remains a configurable OEM design.
850mAh for a Defined Operating Window
The rated capacity supports early comparison of reporting intervals, active use and standby requirements without turning the page into a generic capacity claim.
6mm for Shallow Enclosure Planning
The slim profile provides a concrete boundary for housing depth, cushioning, compression risk and clearance around the finished battery assembly.
30mm × 48mm for a Linear Pocket
The longer rectangular plan area can help align the battery with a board edge, handheld grip, tracker shell or other elongated product space.
Approx. 425mA Standard-Charge Reference
The calculated charge and discharge references give the power team early inputs for charger and load discussions while the final limits remain configuration-specific.
Approx. 17g for System-Weight Planning
The family-derived weight reference can be included in an early portable-device budget, then replaced by the finished battery assembly weight during validation.
Battery Calculation
Check 603048 Energy and Estimated Runtime
Use the prefilled 603048 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Approx. 425mA is the approximate standard-charge reference for 850mAh.
3.15WhEstimated Energy
—Estimated Runtime
—Ideal Charge Time
How to Use the Result
The 603048 reference values are prefilled: 3.7V, 850mAh and a standard-charge reference of approximately 425mA. Adjust the load power and efficiency to compare operating scenarios; the calculator does not infer safe limits from capacity alone.
- Energy = voltage × capacity ÷ 1000
- Runtime estimate = energy × efficiency ÷ load power
- Ideal charge time = capacity ÷ entered charge current
- Actual runtime depends on load profile, temperature, cutoff and system losses
Use the result for early comparison, then confirm the charger, protection, connector and final battery specification through sample testing.
Integration Guidance
Integrate the 603048 Battery Around a 6mm Profile
The main integration question for 603048 is how the 6mm cell depth and 30mm × 48mm footprint sit inside the device stack-up. Review the battery pocket, lead exit and service clearance together with the 850mAh energy target.
Reserve the Shallow Pocket
Start with the 6mm cell dimension, then add the clearance required for cushioning, retention and the final protection or connection arrangement.
Use the Long Side Intentionally
Place the 48mm length where it supports a stable retention feature or a clean cable route instead of forcing the pouch into a short cavity.
Compare Energy with Active Load
Approximately 3.15Wh supports initial runtime comparison, but radio bursts, displays and cutoff settings can reduce the usable operating window.
Validate Current Paths
Use the calculated current references for early power-path discussion and confirm the final charger, protection and load limits with the approved design.
The stated dimensions and calculated values are reference inputs for design planning. Confirm the finished battery drawing, tolerance, protection, connector and test conditions before production release.
Applications & Solutions
Applications for a Slim 603048 LiPo Battery Format
The 603048 format may suit compact products that need a slim battery pocket with more plan length than width. These application paths focus on where the 6mm profile, 850mAh energy target and approximately 17g reference weight should be evaluated together.
01Asset Trackers
The 850 mAh capacity and 6 mm × 30 mm × 48 mm envelope can be compared with asset-tracker reporting intervals, enclosure space and service access.
View Asset Trackers solutions →
02Barcode Scanners
The format can be assessed beside the scan engine, trigger, display and grip structure in a handheld barcode-scanner enclosure.
View Barcode Scanners solutions →
03Blood Glucose Monitors
The 850 mAh reference can support early runtime and portability comparisons in a blood glucose monitor; confirm sensing, charging and protection requirements.
View Blood Glucose Monitors solutions →
04Smart Bands
The 6 mm × 30 mm × 48 mm format can be compared with smart-band comfort, enclosure depth, sensor placement and cable routing.
View Smart Bands solutions →These application paths are starting points for OEM evaluation. Final suitability depends on actual load, runtime, temperature, protection, connector and assembly requirements.
Related Technical Articles
Guidance for 603048 Battery Selection
Technical Guidance for 603048 Battery Integration
C-RatingWhat Is the C Rating of a LiPo Battery and Why It Matters
Relate device current demand to charge, discharge and protection planning before finalizing the battery configuration.
Read the technical guide →
TemperatureHow Temperature Affects the Performance of a LiPo Battery
Keep temperature, resistance, charging limits and the usable energy window in the final validation plan.
Read the technical guide →
RuntimeHow Long Does a Lithium Polymer Battery Work?
Translate the capacity reference into a realistic runtime discussion using the actual device load and cutoff.
Read the technical guide →OEM Battery Support
Start the 603048 Inquiry with the Pocket and Load Profile
A useful inquiry explains how the 6mm × 30mm × 48mm reference will be installed, what operating interval the 850mAh capacity must support and how the charger, connector and protection system will be validated.
Useful RFQ Inputs
Share the information that allows the 603048 format to be assessed in its real mechanical and electrical context.
- Target runtime and duty cycle
- Continuous and peak load profile
- 6mm battery depth and pocket clearance
- Charger and approximate current target
- Connector, cable exit and retention
- Forecast quantity and documentation needs
When the Slim Reference Needs Adjustment
ZERNE can review alternate capacity, thickness, geometry, protection, connector and assembly requirements when the 603048 format does not match the finished device.
Discuss a Custom BatteryFAQ
603048 LiPo Battery Questions
Find answers about the 603048 3.7V 850mAh lithium polymer battery, its slim rectangular format, approximate weight, calculated current references and OEM integration path.
What are the dimensions of the 603048 LiPo battery?
The 603048 reference is specified as 6mm × 30mm × 48mm in thickness × width × length order. Allow additional space for cushioning, retention, leads and the finished protection arrangement.
How much energy does the 603048 battery provide?
The rated capacity is 850mAh at a nominal voltage of 3.7V. The calculated energy is approximately 3.15Wh before cutoff, load, temperature, resistance, protection and system losses.
What is the approximate weight of the 603048 battery?
Using the approved 3.7V LiPo family weight reference, the 850mAh configuration is approximately 17g. The finished battery weight depends on leads, protection, connector and assembly details.
What are the calculated current references for 603048?
The table provides approximately 425mA standard charge, 850mA rapid charge, 170mA standard discharge and 850mA maximum discharge references. Confirm the final safe limits for the completed configuration.
Can ZERNE customize a 603048 battery configuration?
Yes. Share the battery pocket, target runtime, load profile, charging conditions, connector, operating environment, quantity and documentation needs so ZERNE can review the right configuration.
Technical Inquiry
Review the 603048 Battery Fit with ZERNE
Share the target application, operating interval, 6mm battery pocket, current profile and production plan so the discussion can focus on mechanical fit, sample validation and the final OEM specification.
- Product model and target application
- Required capacity, runtime and duty cycle
- Battery pocket, clearance and connector
- Load profile, charger and documentation