1.85Wh Calculated Energy for Early Runtime Planning
The confirmed 3.7V nominal voltage and 500mAh rated capacity provide approximately 1.85Wh before system losses, cutoff effects and application-specific derating.
3.7V Lithium Polymer Battery · 500–1000mAh Range
3.7 V 500mAh Lithium Polymer Battery 801348
The 801348 LiPo battery provides a 3.7V nominal platform and 500mAh rated capacity in a 8.0mm × 13mm × 48mm pouch format. A compact 500mAh reference with a narrow 13mm width and 48mm length for slim device pockets.
80134813mm48mm8.0mm
801348500mAh · 3.7V8.0mm × 13mm × 48mm
801348 LiPo BatteryApprox. 1.85Wh calculated energy in a 500mAh-class pouch format
3.7V · 8.0mm × 13mm × 48mm reference visualProduct snapshot
A 500mAh compact narrow-pocket reference for compact connected devices
The 801348 model is positioned around compact narrow-pocket geometry rather than capacity alone. It can be considered for small trackers, handheld controls and connected products with a modest energy target. A compact 500mAh reference with a narrow 13mm width and 48mm length for slim device pockets.
A 13mm × 48mm Compact Narrow-Pocket Footprint
The 8.0mm × 13mm × 48mm envelope supports early review of the battery pocket, enclosure depth, cushioning, retention and connector access.
Selection focus for 801348
A compact 500mAh reference with a narrow 13mm width and 48mm length for slim device pockets. The first engineering screen is the 13mm × 48mm plan area, followed by the 8.0mm stack-up and the 500mAh energy target. Check the 13mm width beside the PCB and leave room around the 8.0mm profile for cushioning, cable exit and retention. For the device team, It can be considered for small trackers, handheld controls and connected products with a modest energy target. Provide the usable 13mm × 48mm area, 8.0mm depth, peak load, target runtime and connector direction. This sequence keeps geometry, energy planning and electrical validation in one practical selection path.
3.7V · 500mAhNominal voltage · rated capacity
≈10gCalculated weight reference
≈250 / 500mACharge current · standard / rapid
≈100 / 500mADischarge current · standard / maximum
Current, energy and weight values are calculated references for early planning. Confirm final limits and the finished battery configuration with ZERNE.
Technical data
801348 LiPo Battery Specifications
These specifications summarize the 801348 reference format. A compact 500mAh reference with a narrow 13mm width and 48mm length for slim device pockets. Confirm final construction, protection, connector and validation conditions for the finished OEM battery configuration.
| 801348 Mechanical and Electrical Specifications | |
|---|---|
| Product number | 801348 |
| Nominal voltage | 3.7V |
| Rated capacity | 500mAh |
| Confirmed C-rate | 1C |
| Battery dimension | 8.0mm × 13mm × 48mm |
| Listed internal resistance | 110mΩ |
| Calculated Electrical References | |
| Standard charge current | Approx. 250mA |
| Rapid charge current | Approx. 500mA |
| Standard discharge current | Approx. 100mA |
| Maximum discharge current | Approx. 500mA |
| Calculated energy | Approx. 1.85Wh |
The direct 801348 values are used as the model reference. Current, energy and weight figures are calculated references rather than measured production results. Confirm the final charging profile, discharge demand, protection configuration, connector, tolerances and validation conditions with ZERNE for the finished device.
Product characteristics & advantages
Why Evaluate the 801348 500mAh LiPo Battery?
The 801348 model is positioned around compact narrow-pocket geometry rather than capacity alone. It can be considered for small trackers, handheld controls and connected products with a modest energy target. A compact 500mAh reference with a narrow 13mm width and 48mm length for slim device pockets. The geometry and energy-planning tradeoff are the primary selection focus for this reference model.
The 801348 page focuses on the decision most relevant to this reference: A compact 500mAh reference with a narrow 13mm width and 48mm length for slim device pockets. Its capacity, geometry, listed resistance and 1C family rate should be evaluated together with the finished device load and enclosure.
500mAh for Compact Connected Devices
The 500mAh rated capacity provides a defined basis for comparing runtime, standby intervals and service targets in compact connected devices.
13mm × 48mm Battery Footprint
The 8.0mm × 13mm × 48mm envelope gives engineering teams a concrete reference for enclosure clearance, retention, cable exit and component placement.
8.0mm Thickness to Check Early
Review the listed 8.0mm profile with housing tolerances, cushioning and nearby electronics before finalizing the battery pocket.
110mΩ Internal Resistance Reference
The listed 110mΩ resistance can support early voltage-drop discussion for this compact narrow-pocket format; validate the finished battery under actual load and temperature conditions.
Battery calculation
Check 801348 Energy and Estimated Runtime
Use the prefilled 801348 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Runtime is an estimate, not guaranteed product performance.
1.85WhEstimated energy
3.33hEstimated runtime
How to Use the Result
The 801348 values are prefilled: 3.7V and 500mAh. Adjust the load power and efficiency to compare different operating scenarios.
- Energy is estimated from nominal voltage and capacity
- Runtime estimate = energy × efficiency ÷ load power
- Actual runtime depends on load profile, cutoff, temperature and system losses
- Use sample testing to validate the final battery and device combination
Use the result as an initial estimate, then discuss charger validation and the final battery specification with ZERNE.
Integration guidance
Plan the 801348 Battery Around the 8.0mm × 13mm × 48mm Envelope
Reserve the stated battery pocket, allow for the 8.0mm thickness, review cable and connector access, and validate the charger, protection and finished load profile before production. Check the 13mm width beside the PCB and leave room around the 8.0mm profile for cushioning, cable exit and retention.
Reserve the 13mm × 48mm Battery Area
Allow space for the pouch cell, enclosure walls, cushioning, retention features, cable exit and service access around the listed footprint.
Check the 8.0mm Profile
Review compression risk, enclosure tolerances and adjacent components around the battery before finalizing the mechanical design.
Confirm Electrical and Protection Requirements
Use the calculated 250mA standard-charge, 500mA rapid-charge, 100mA standard-discharge and 500mA maximum-discharge references for early review, then validate the finished battery assembly.
Applications & solution paths
Applications for the 801348 500mAh LiPo Battery
The 801348 format can be considered for products that match its 8.0mm × 13mm × 48mm envelope and 500mAh energy target. It can be considered for small trackers, handheld controls and connected products with a modest energy target. Final suitability depends on device load, runtime, enclosure, charging and connector requirements.
01Smart Home Devices
The pouch format provides a concrete reference for connected products with a defined internal battery area. The 801348 model offers a 500mAh target in a 8.0mm × 13mm × 48mm pouch envelope.
View smart home devices solutions →
02GPS Tracking
The geometry and capacity can be compared with tracker battery pockets, reporting intervals and cable routing. The 801348 model offers a 500mAh target in a 8.0mm × 13mm × 48mm pouch envelope.
View gps tracking solutions →
03Wearables
The model can be considered for selected wearable or monitoring housings when its thickness and footprint remain acceptable. The 801348 model offers a 500mAh target in a 8.0mm × 13mm × 48mm pouch envelope.
View wearables solutions →
04IoT Equipment
The calculated energy can be compared with sensing, wireless communication and standby requirements. The 801348 model offers a 500mAh target in a 8.0mm × 13mm × 48mm pouch envelope.
View iot equipment solutions →The 801348 is positioned within ZERNE's 3.7V 500–1000mAh lithium polymer battery range. Ask ZERNE to confirm the final construction, protection, connector, charging limits and validation plan for the required device.
Related technical articles
Technical Guidance for 801348 LiPo Integration
Use these resources to review the energy, geometry, current and safety questions most relevant to a 8.0mm × 13mm × 48mm pouch battery.
RuntimeHow Long Does a Lithium Polymer Battery Work?
Use capacity, load profile and system efficiency to estimate the operating interval for a compact device.
Read the technical guide →
SafetyWhy Do LiPo Batteries Explode and How to Prevent It
Review protection, enclosure and charging controls before adopting a compact pouch format.
Read the technical guide →
EnergyWhat Is Energy Density in Lithium Polymer Battery?
Compare the energy target with the physical pocket available to the device.
Read the technical guide →OEM battery support
Start the 801348 Battery Inquiry with the Device Power Profile
A complete inquiry can include the required runtime, device load, 8.0mm × 13mm × 48mm battery pocket, charger, connector and documentation needed to evaluate this 500mAh reference format. Provide the usable 13mm × 48mm area, 8.0mm depth, peak load, target runtime and connector direction.
Information to Include in Your Inquiry
Share the product conditions that determine how the 801348 format will fit and perform in the finished device, especially its battery pocket, load and charging window.
- Target runtime and duty cycle
- Voltage, capacity and battery pocket
- 8.0mm depth and enclosure clearance
- Charger and charging conditions
- Operating and storage environment
- Connector, quantity and approval timing
When the Reference Format Is Not Enough
ZERNE can discuss alternate capacity, geometry, protection, connector and assembly requirements when the 801348 specification does not match the finished product.
Discuss a Custom BatteryFAQ
801348 LiPo Battery Questions
Find answers about the 801348 3.7V 500mAh lithium polymer battery, including its dimensions, calculated energy, current references and OEM integration considerations.
What Are the Dimensions of the 801348 LiPo Battery?
The 801348 battery measures 8.0mm in thickness, 13mm in width and 48mm in length.
What Capacity and Energy Does the 801348 Battery Provide?
The listed rated capacity is 500mAh at a nominal voltage of 3.7V. The calculated energy is approximately 1.85Wh before system losses.
What Charge and Discharge Current References Apply to 801348?
The calculated references are approximately 250mA for standard charging, 500mA for rapid charging, 100mA for standard discharge and 500mA for maximum discharge. Confirm the final production limits and test conditions with ZERNE.
What Is the Approximate Weight of the 801348 Battery?
The calculated weight reference is approximately 10g. Final weight can vary with the completed battery configuration and should be confirmed during sampling.
What Internal Resistance Is Listed for the 801348 Battery?
The supplied reference lists internal resistance of 110mΩ. Actual system behavior should be checked under the finished load, temperature and assembly conditions.
How Should the 801348 Format Be Screened During Early Design?
A compact 500mAh reference with a narrow 13mm width and 48mm length for slim device pockets. Confirm the usable pocket and calculated electrical references before requesting samples.
What Is the Main Advantage of the 801348 Battery Format?
The 801348 provides a 500mAh-class capacity in a 8.0mm × 13mm × 48mm pouch envelope, giving OEM teams a concrete starting point for product-space and energy planning.
Can the 801348 Battery Be Customized?
The 801348 is a reference model. ZERNE can discuss alternate capacity, dimensions, protection, connector and wiring requirements when the listed format does not match the finished product.
What Should Be Confirmed Before Integrating the 801348 Battery?
Review the stated battery area, 8.0mm depth, load profile, charging conditions, protection design, connector, cable exit and enclosure retention with ZERNE.
Lithium polymer battery inquiry
Review the 801348 Battery Fit with ZERNE
Share the application, runtime target, load profile, 8.0mm × 13mm × 48mm battery area, charging conditions and annual demand so ZERNE can recommend the right sample and validation path. Provide the usable 13mm × 48mm area, 8.0mm depth, peak load, target runtime and connector direction.
- Product model and target application
- Required voltage, capacity and runtime
- Battery-pocket dimensions and clearance
- Charger, connector and documentation needs