Same Footprint, Less Depth
The 6.8mm profile gives packaging teams a direct way to compare clearance, cushioning and connector height.
3.7 V Lithium Polymer Battery
3.7 V 2200mAh Lithium Polymer Battery 684060
The 684060 lipo battery delivers a 2200mAh rated capacity in a 6.8mm × 40mm × 60mm format. Its approximately 8.14Wh reference gives portable products a higher reserve while keeping the depth below the nearby 714060 configuration.
684060 LiPo Battery Reference6.8mm × 40mm × 60mm Format
3.7 V · ≈8.14WhProduct Snapshot
A Low-Profile Alternative for the 40mm × 60mm Footprint
The 684060 shares a 40mm × 60mm plan area with the 714060 but reduces thickness to 6.8mm. It is a direct format comparison when footprint is fixed and depth is sensitive.
8.14Wh for Longer Product Intervals
The 2200mAh rating supports a substantial runtime discussion in portable devices, printers and connected equipment.
2200mAhRated Capacity
8.14WhCalculated Energy
6.8mmCell Thickness
40mm × 60mmPlan Area
Technical Data
684060 LiPo Battery Specifications
The table separates confirmed configuration data from calculated electrical references so the 684060 format can be reviewed quickly during product planning.
| 684060 Mechanical and Electrical Specifications | |
|---|---|
| Product Number | 684060 |
| Nominal Voltage | 3.7 V |
| Rated Capacity | 2200mAh |
| Battery Dimension | 6.8mm × 40mm × 60mm |
| Approximate Battery Weight | Approx. 44g |
| C-Rate | 1C |
| Internal Resistance | 50mΩ |
| Calculated Electrical References | |
| Standard Charge Current | Approx. 1100mA |
| Rapid Charge Current | Approx. 2200mA |
| Standard Discharge Current | Approx. 440mA |
| Maximum Discharge Current | Approx. 2200mA |
| Calculated Energy | Approx. 8.14Wh |
Approximate weight uses the approved 3.7 V LiPo family reference. Current and energy values are calculated planning references; internal resistance is a supplied reference, not a universal performance limit; confirm the final charger, protection and load specification for the finished battery.
Product Characteristics & Advantages
A Thin 2.2Ah Reference for 40mm × 60mm Pockets: Why Evaluate the 684060 LiPo Battery?
The 684060 is a same-footprint selection with a thinner depth. The 50mΩ value is useful for the initial electrical review, while low-temperature charging and usable capacity require test confirmation.
The 684060 is a same-footprint selection with a thinner depth. The 50mΩ value is useful for the initial electrical review, while low-temperature charging and usable capacity require test confirmation. The calculated electrical references provide a structured starting point for charger, load and protection discussions, while the final battery remains a configurable OEM design.
8.14Wh for a Defined Operating Target
Use the calculated energy to compare the product load, standby interval and desired recharge schedule.
6.8mm × 40mm × 60mm for Enclosure Planning
Review the cell envelope with cushioning, protection, retention and cable access before releasing the battery bay.
Capacity-Derived Current References
The table gives early charger and load inputs; final electrical limits depend on the approved battery assembly.
50mΩ for Power-Path Discussion
Use the listed internal-resistance reference with peak current, wiring, connector and temperature during validation.
Qualified Low-Temperature Evaluation
Confirm usable capacity, charging limits and cold-start behavior at the actual required operating condition.
Battery Calculation
Check 684060 Energy and Estimated Runtime
Use the prefilled 684060 values or enter your own load assumptions for a quick energy and runtime estimate.
LiPo Battery Capacity Calculator
Energy is calculated from nominal voltage and capacity. Runtime uses the entered load power and an adjustable efficiency assumption.
Approx. 1100mA is the approximate standard-charge reference for 2200mAh.
8.14WhEstimated Energy
—Estimated Runtime
—Ideal Charge Time
How to Use the Result
The 684060 reference values are prefilled: 3.7 V, 2200mAh and a standard-charge reference of approximately 1100mA. Adjust the load power and efficiency to compare operating scenarios; the calculator does not infer safe limits from capacity alone.
- Energy = voltage × capacity ÷ 1000
- Runtime estimate = energy × efficiency ÷ load power
- Ideal charge time = capacity ÷ entered charge current
- Actual runtime depends on load profile, temperature, cutoff and system losses
Use the result for early comparison, then confirm the charger, protection, connector and final battery specification through sample testing.
Integration Guidance
Choose Between the 684060 and Same-Footprint Formats
When the 40mm × 60mm footprint is established, compare the 6.8mm thickness and 8.14Wh target with the finished enclosure and charger.
Fixed Footprint
A known plan area shifts the decision toward depth, energy and clearance.
Connector Height
The extra space from a thinner cell can be lost if the connector, protection or cable bend is not planned.
Cold-Weather Behavior
Evaluation should include charge acceptance, usable capacity and device startup under the actual load.
The stated dimensions and calculated values are reference inputs for design planning. Confirm the finished battery drawing, tolerance, protection, connector and test conditions before production release.
Applications & Solutions
Applications for the Same-Footprint 684060 LiPo Battery
The 684060 page focuses on a low-profile 2.2Ah pouch for products that already have a 40mm × 60mm battery area.
01Portable Printers
The 6.8mm × 40mm × 60mm envelope can be evaluated where print bursts, paper-path clearance and an extended operating interval matter.
View Portable Printer Battery Solutions →
02Blood Pressure Monitors
The energy reference may support portable blood-pressure equipment where pump operation and recharge intervals share the battery area.
View Blood Pressure Monitor Solutions →
03Asset Trackers
The same-footprint pouch can be compared with asset-tracker housings that need a longer standby interval.
View Asset Tracker Solutions →These application paths are starting points for OEM evaluation. Final suitability depends on actual load, runtime, temperature, protection, connector and assembly requirements.
Related Technical Articles
Guidance for 684060 Battery Selection
Use these technical guides to connect low-temperature operation, current demand and energy planning with the finished battery specification.
Operating ConditionsHow Temperature Affects the Performance of a LiPo Battery
Use this guide when validating the 684060 configuration for low-temperature operation, charging and capacity retention.
Read the operating conditions guide →
Current DemandWhat Is the C Rating of a LiPo Battery and Why It Matters
Compare the 684060 current references with startup demand, charger selection and the completed device power path.
Read the current demand guide →
Energy PlanningWhat Is Energy Density in a Lithium Polymer Battery?
Relate the 684060 calculated energy to its physical envelope, device load and target operating interval.
Read the energy planning guide →OEM Battery Support
Compare the 684060 Footprint with ZERNE
Tell us whether the enclosure is fixed at 40mm × 60mm, the allowed depth, runtime, load profile and charging range so 684060 can be compared with 714060.
Useful RFQ Inputs
Include the conditions that determine whether this reference is suitable for the finished product.
- Target runtime and duty cycle
- 2200mAh energy target and load profile
- 6.8mm depth and 40mm × 60mm pocket
- Low-temperature operating and charging range
- Connector, protection and cable arrangement
- Forecast quantity, samples and documentation
When the Standard Format Needs Adjustment
ZERNE can review capacity, dimensions, protection, connector and temperature requirements when the 684060 configuration does not match the device.
Discuss a Custom BatteryFAQ
684060 LiPo Battery Questions
Find answers about the 684060 3.7 V 2200mAh lithium polymer battery, including its dimensions, energy reference, current calculations, internal resistance and low-temperature evaluation.
What are the dimensions of the 684060 LiPo battery?
The 684060 reference is 6.8mm × 40mm × 60mm in thickness × width × length order. Add room for cushioning, leads, connector and retention in the finished pocket.
How much energy does the 684060 battery provide?
At 3.7 V nominal voltage and 2200mAh rated capacity, the calculated energy is approximately 8.14Wh before cutoff, load, temperature and system losses.
What current references are shown for 684060?
The table provides Approx. 1100mA standard charge, Approx. 2200mA rapid charge, Approx. 440mA standard discharge and Approx. 2200mA maximum discharge references. Confirm final safe limits for the completed battery.
How is 684060 different from 714060?
Both provide 2200mAh in a 40mm × 60mm plan area. The 684060 is 6.8mm thick, while the 714060 is 7.1mm thick.
Can ZERNE review the 684060 format for a cold-weather product?
Yes. Share the operating and charging range, runtime, load profile, connector, protection requirements and quantity so ZERNE can define an appropriate validation path.
Technical Inquiry
Review the 684060 Same-Footprint Battery with ZERNE
Tell us the fixed pocket dimensions, available depth, runtime target and temperature range so the 684060 versus 714060 decision can include the full assembly.
- 40mm × 60mm footprint and 6.8mm depth
- 2200mAh target and 8.14Wh reference
- 50mΩ, charger and peak-load conditions
- Connector, protection and cold-weather test plan